HP 6730b 笔记本的内核配置
我不知道我做了什么导致了这个问题。这是 xubuntu 最新版本 12.04.02 LTS
内核配置链接：http://pastebin.com/AuYWdNDR
有什么建议吗？
感谢您的任何帮助。
传感器
acpitz-virtual-0
Adapter: Virtual device
temp1: +41.0°C (crit = +256.0°C)
temp2: +43.0°C (crit = +110.0°C)
temp3: +43.0°C (crit = +105.0°C)
temp4: +31.4°C (crit = +110.0°C)
temp5: +100.0°C (crit = +110.0°C)
coretemp-isa-0000
Adapter: ISA adapter
Core 0: +39.0°C (high = +105.0°C, crit = +105.0°C)
Core 1: +37.0°C (high = +105.0°C, crit = +105.0°C)
ACPI 配置：
0.443879] pnp: PnP ACPI: found 13 devices
[ 0.443881] ACPI: ACPI bus type pnp unregistered
[ 2.439310] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 2.439390] ACPI: AC Adapter [AC] (on-line)
[ 2.439463] ACPI: Sleep Button [SLPB]
[ 2.439537] ACPI: Lid Switch [LID]
[ 2.439575] ACPI: Power Button [PWRF]
[ 2.439649] ACPI: Fan [FAN0] (off)
[ 2.439693] ACPI: Fan [FAN1] (off)
[ 2.439731] ACPI: Fan [FAN2] (off)
[ 2.439773] ACPI: Fan [FAN3] (off)
[ 2.439811] ACPI: Fan [FAN4] (off)
[ 2.439861] ACPI: Requesting acpi_cpufreq
[ 2.441224] ACPI: acpi_idle registered with cpuidle
[ 2.454302] ACPI: Thermal Zone [DTSZ] (78 C)
[ 2.470887] ACPI: Thermal Zone [CPUZ] (81 C)
[ 2.474253] ACPI: Thermal Zone [SKNZ] (63 C)
[ 2.486164] ACPI: Thermal Zone [BATZ] (30 C)
[ 2.491937] ACPI: Thermal Zone [FDTZ] (25 C)
[ 2.555275] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 2.555281] ACPI: Battery Slot [BAT0] (battery present)
[ 2.555329] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 2.555335] ACPI: Battery Slot [BAT1] (battery absent)
[ 3.753101] ACPI Exception: AE_AML_PACKAGE_LIMIT, Index (0x0000000000000005) is beyond end of object (20121018/exoparg2-418)
[ 3.753109] ACPI Error: Method parse/execution failed [\_SB_.PCI0.GFX0._DOD] (Node ffff88013aa322f8), AE_AML_PACKAGE_LIMIT (20121018/psparse-537)
[ 3.753116] ACPI Exception: AE_AML_PACKAGE_LIMIT, Evaluating _DOD (20121018/video-1163)
[ 3.755247] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 4.103636] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 4.113621] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 4.436787] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 4.441624] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 12.240143] parport_pc 00:09: reported by Plug and Play ACPI
[ 12.434379] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20121018/utaddress-251)
[ 12.434387] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 12.434391] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20121018/utaddress-251)
[ 12.434394] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 12.434395] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20121018/utaddress-251)
[ 12.434398] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 260.354206] tg3 0000:85:00.0: System wakeup enabled by ACPI
[ 263.508180] snd_hda_intel 0000:00:1b.0: power state changed by ACPI to D3hot
[ 263.524145] ehci-pci 0000:00:1d.7: System wakeup enabled by ACPI
[ 263.540109] uhci_hcd 0000:00:1d.2: System wakeup enabled by ACPI
[ 263.540193] uhci_hcd 0000:00:1d.1: System wakeup enabled by ACPI
[ 263.540275] uhci_hcd 0000:00:1d.0: System wakeup enabled by ACPI
[ 263.540317] ehci-pci 0000:00:1a.7: System wakeup enabled by ACPI
[ 263.556104] uhci_hcd 0000:00:1a.2: System wakeup enabled by ACPI
[ 263.556188] uhci_hcd 0000:00:1a.1: System wakeup enabled by ACPI
[ 263.556271] uhci_hcd 0000:00:1a.0: System wakeup enabled by ACPI
[ 263.556663] ACPI: Preparing to enter system sleep state S3
[ 263.700482] ACPI: Low-level resume complete
[ 263.714676] ACPI: Waking up from system sleep state S3
[ 263.876133] uhci_hcd 0000:00:1a.0: System wakeup disabled by ACPI
[ 263.876205] uhci_hcd 0000:00:1a.1: System wakeup disabled by ACPI
[ 263.876275] uhci_hcd 0000:00:1a.2: System wakeup disabled by ACPI
[ 263.892060] ehci-pci 0000:00:1a.7: System wakeup disabled by ACPI
[ 263.912033] snd_hda_intel 0000:00:1b.0: power state changed by ACPI to D0
[ 263.928473] uhci_hcd 0000:00:1d.0: System wakeup disabled by ACPI
[ 263.928540] uhci_hcd 0000:00:1d.1: System wakeup disabled by ACPI
[ 263.928608] uhci_hcd 0000:00:1d.2: System wakeup disabled by ACPI
[ 263.944058] ehci-pci 0000:00:1d.7: System wakeup disabled by ACPI
[ 264.112308] tg3 0000:85:00.0: System wakeup disabled by ACPI
[ 264.358813] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 264.364213] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 264.371521] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 264.374199] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out