FFMPEG-非单调的DTS

FFMPEG-非单调的DTS

当我使用 FFMPEG 将视频从 MP4 转换为 M3U8 时,使用以下命令,

ffmpeg -i op.mp4  -b:v 128k -flags -global_header -map 0:0 -map 0:1 -f segment -segment_time 4 -segment_list_size 0 -segment_list op.m3u8 -segment_format mpegts op%05d.ts

我收到以下警告:

Non-monotonous DTS in output stream 0:1; previous: 347527, current: 346508; changing to 347528. This may result in incorrect timestamps in the output file.

M3U8 已生成,但 QuickTime 播放器上仅显示音频。

示例 MP4 和 M3U8 均可用这里

所以我想知道

  1. 此错误背后的原因。是 mp4 损坏还是转换过程中出现问题。m3u8 可播放但无法在 quicktime 上正常播放。只有音频出现,没有视频。

  2. 我怎么才能解决这个问题

完整的 FFMPEG 控制台输出:

ffmpeg version git-2013-06-06-c51654f Copyright (c) 2000-2013 the FFmpeg developers
  built on Jun  6 2013 12:54:24 with gcc 4.6.3 (GCC) 20120306 (Red Hat 4.6.3-2)
  configuration: --prefix=/root/ffmpeg_build --extra-cflags=-I/root/ffmpeg_build/include --extra-ldflags=-L/root/ffmpeg_build/lib --bindir=/root/bin --extra-libs=-ldl --enable-gpl --enable-nonfree --enable-libfdk_aac --enable-libmp3lame --enable-libopus --enable-libvorbis --enable-libvpx --enable-libx264
  libavutil      52. 35.100 / 52. 35.100
  libavcodec     55. 15.100 / 55. 15.100
  libavformat    55.  8.102 / 55.  8.102
  libavdevice    55.  2.100 / 55.  2.100
  libavfilter     3. 75.101 /  3. 75.101
  libswscale      2.  3.100 /  2.  3.100
  libswresample   0. 17.102 /  0. 17.102
  libpostproc    52.  3.100 / 52.  3.100
Input #0, mov,mp4,m4a,3gp,3g2,mj2, from 'op.mp4':
  Metadata:
    major_brand     : isom
    minor_version   : 512
    compatible_brands: isomiso2avc1mp41
    encoder         : Lavf55.8.102
  Duration: 00:00:06.00, start: 0.010000, bitrate: 679 kb/s
    Stream #0:0(eng): Video: h264 (Baseline) (avc1 / 0x31637661), yuv420p, 640x364 [SAR 1:1 DAR 160:91], 590 kb/s, 25 fps, 25 tbr, 90k tbn, 50 tbc
    Metadata:
      handler_name    : VideoHandler
    Stream #0:1(eng): Audio: aac (mp4a / 0x6134706D), 44100 Hz, stereo, fltp, 130 kb/s
    Metadata:
      handler_name    : SoundHandler
[segment @ 0x32e1d60] Codec for stream 0 does not use global headers but container format requires global headers
[segment @ 0x32e1d60] Codec for stream 1 does not use global headers but container format requires global headers
Output #0, segment, to 'op%05d.ts':
  Metadata:
    major_brand     : isom
    minor_version   : 512
    compatible_brands: isomiso2avc1mp41
    encoder         : Lavf55.8.102
    Stream #0:0(eng): Video: mpeg2video, yuv420p, 640x364 [SAR 1:1 DAR 160:91], q=2-31, 128 kb/s, 90k tbn, 25 tbc
    Metadata:
      handler_name    : VideoHandler
    Stream #0:1(eng): Audio: mp2, 44100 Hz, stereo, s16, 128 kb/s
    Metadata:
      handler_name    : SoundHandler
Stream mapping:
  Stream #0:0 -> #0:0 (h264 -> mpeg2video)
  Stream #0:1 -> #0:1 (aac -> mp2)
Press [q] to stop, [?] for help
[segment @ 0x32e1d60] Non-monotonous DTS in output stream 0:1; previous: 347527, current: 346508; changing to 347528. This may result in incorrect timestamps in the output file.
frame=  109 fps=0.0 q=31.0 size=N/A time=00:00:04.29 bitrate=N/A dup=14 drop=0  frame=  151 fps=0.0 q=24.8 Lsize=N/A time=00:00:06.00 bitrate=N/A dup=14 drop=0    
video:350kB audio:96kB subtitle:0 global headers:0kB muxing overhead -100.004823%

使用 vsync 和 async 选项时,出现的错误是“流 0 的编解码器不使用全局标头,但容器格式需要全局标头”。以下是控制台输出:

ffmpeg -i op.mp4  -b:v 128k -flags -global_header -map 0:0 -map 0:1 -f segment -segment_time 4 -segment_list_size 0 -segment_list nop.m3u8 -segment_format mpegts nop%05d.ts  
ffmpeg version git-2013-06-06-c51654f Copyright (c) 2000-2013 the FFmpeg developers
  built on Jun  6 2013 12:54:24 with gcc 4.6.3 (GCC) 20120306 (Red Hat 4.6.3-2)
  configuration: --prefix=/root/ffmpeg_build --extra-cflags=-I/root/ffmpeg_build/include --extra-ldflags=-L/root/ffmpeg_build/lib --bindir=/root/bin --extra-libs=-ldl --enable-gpl --enable-nonfree --enable-libfdk_aac --enable-libmp3lame --enable-libopus --enable-libvorbis --enable-libvpx --enable-libx264
  libavutil      52. 35.100 / 52. 35.100
  libavcodec     55. 15.100 / 55. 15.100
  libavformat    55.  8.102 / 55.  8.102
  libavdevice    55.  2.100 / 55.  2.100
  libavfilter     3. 75.101 /  3. 75.101
  libswscale      2.  3.100 /  2.  3.100
  libswresample   0. 17.102 /  0. 17.102
  libpostproc    52.  3.100 / 52.  3.100
Input #0, mov,mp4,m4a,3gp,3g2,mj2, from 'op.mp4':
  Metadata:
    major_brand     : isom
    minor_version   : 512
    compatible_brands: isomiso2avc1mp41
    encoder         : Lavf55.8.102
  Duration: 00:00:06.00, start: 0.010000, bitrate: 679 kb/s
    Stream #0:0(eng): Video: h264 (Baseline) (avc1 / 0x31637661), yuv420p, 640x364 [SAR 1:1 DAR 160:91], 590 kb/s, 25 fps, 25 tbr, 90k tbn, 50 tbc
    Metadata:
      handler_name    : VideoHandler
    Stream #0:1(eng): Audio: aac (mp4a / 0x6134706D), 44100 Hz, stereo, fltp, 130 kb/s
    Metadata:
      handler_name    : SoundHandler
[segment @ 0x3bf3d60] Codec for stream 0 does not use global headers but container format requires global headers
[segment @ 0x3bf3d60] Codec for stream 1 does not use global headers but container format requires global headers
Output #0, segment, to 'nop%05d.ts':
  Metadata:
    major_brand     : isom
    minor_version   : 512
    compatible_brands: isomiso2avc1mp41
    encoder         : Lavf55.8.102
    Stream #0:0(eng): Video: mpeg2video, yuv420p, 640x364 [SAR 1:1 DAR 160:91], q=2-31, 128 kb/s, 90k tbn, 25 tbc
    Metadata:
      handler_name    : VideoHandler
    Stream #0:1(eng): Audio: mp2, 44100 Hz, stereo, s16, 128 kb/s
    Metadata:
      handler_name    : SoundHandler
Stream mapping:
  Stream #0:0 -> #0:0 (h264 -> mpeg2video)
  Stream #0:1 -> #0:1 (aac -> mp2)
Press [q] to stop, [?] for help
[segment @ 0x3bf3d60] Non-monotonous DTS in output stream 0:1; previous: 347527, current: 346508; changing to 347528. This may result in incorrect timestamps in the output file.
frame=  119 fps=0.0 q=31.0 size=N/A time=00:00:04.68 bitrate=N/A dup=14 drop=0  frame=  151 fps=0.0 q=24.8 Lsize=N/A time=00:00:06.00 bitrate=N/A dup=14 drop=0    
video:350kB audio:96kB subtitle:0 global headers:0kB muxing overhead -100.004823%

答案1

您的 CSI 剪辑也转换了非单调的 DTS 信息。我能够在 VLC 中正常播放 MP4 剪辑,但 ffplay 在最后出现了问题。我不确定那是什么意思。

ffmpeg -i op.mp4 -b:v 128k -flags -global_header -map 0:0 -map 0:1 -f segment -segment_time 4 -segment_list_size 0 -segment_list op.m3u8 -segment_format mpegts op%05d.ts

只需获取较新版本的ffmpeg。您的是 2013 年 6 月的。我的是 2014 年 3 月的,运行正常。mp4 在 VLC 上播放正常。单个 .ts 文件也播放正常。

C:\temp>dir op*
 Volume in drive C has no label.
 Volume Serial Number is xxx-xxx

 Directory of C:\temp

10/07/2014  08:52 PM               169 op.m3u8
10/07/2014  08:51 PM           509,425 op.mp4
10/07/2014  08:52 PM           404,764 op00000.ts
10/07/2014  08:52 PM           148,520 op00001.ts
               4 File(s)      1,062,878 bytes

op.m3u8 以 4 秒为增量创建片段,直到文件完全处理完毕。

#EXTM3U
#EXT-X-VERSION:3
#EXT-X-MEDIA-SEQUENCE:0
#EXT-X-ALLOW-CACHE:YES
#EXT-X-TARGETDURATION:5
#EXTINF:4.120000,
op00000.ts
#EXTINF:1.960000,
op00001.ts
#EXT-X-ENDLIST

答案2

该 mp4 只有 6 秒长,并且音频流的长度与视频不同,我能够同步两者并通过执行以下操作消除 DTS 错误:

ffmpeg -i op.mp4 -ss 00:00:00.11 -t 00:00:06.00 -vn -y op.wav

ffmpeg -i op.mp4 -ss 0.010000 -t 00:00:06 -vcodec rawvideo -an -y op.avi

ffmpeg -i op.avi -i op.wav -b:v 590k -b:a 130k -t 00:00:06 -y op_fixed.mp4

这基本上重新创建了 mp4 并修复了一些小的损坏问题,同时使两个流的长度相同。

此外,您的命令行不需要两个 -map 参数,并且原始 mp4 中的编解码器都不支持全局标头,除此之外,我也不认为您会需要它们。完成我上面列出的步骤后,以下内容应该可以顺利完成:

ffmpeg -i op_fixed.mp4 -b:v 128k -f segment -segment_time 4 -segment_list_size 0 -segment_list op.m3u8 -segment_format mpegts op%05d.ts

相关内容