我正在尝试根据此创建 RAID 5教程。但是,当我运行时mdadm -C /dev/md0 -l=5 -n=4 /dev/sd[b-e]1
,我收到此错误:
mdadm: invalid raid level: =5
这是输出mdadm -E /dev/sd[b-e]
:
/dev/sdb:
MBR Magic : aa55
Partition[0] : 4294965247 sectors at 2048 (type fd)
/dev/sdc:
MBR Magic : aa55
Partition[0] : 4294965247 sectors at 2048 (type fd)
/dev/sdd:
MBR Magic : aa55
Partition[0] : 4294965247 sectors at 2048 (type fd)
/dev/sde:
MBR Magic : aa55
Partition[0] : 4294965247 sectors at 2048 (type fd)
这是输出mdadm --examine /dev/sdb1 /dev/sdc1 /dev/sdd1 /dev/sde1
:
mdadm: No md superblock detected on /dev/sdb1.
mdadm: No md superblock detected on /dev/sdc1.
mdadm: No md superblock detected on /dev/sdd1.
mdadm: No md superblock detected on /dev/sde1.
这是输出fdisk -l | grep sd
:
Disk /dev/sda: 300.0 GB, 300000000000 bytes
/dev/sda1 * 2048 626687 312320 83 Linux
/dev/sda2 626688 34187263 16780288 82 Linux swap / Solaris
/dev/sda3 34187264 139059199 52435968 83 Linux
/dev/sda4 139059200 585936895 223438848 83 Linux
Disk /dev/sdc: 8001.6 GB, 8001563222016 bytes
/dev/sdc1 2048 4294967294 2147482623+ fd Linux raid autodetect
Disk /dev/sdb: 8001.6 GB, 8001563222016 bytes
/dev/sdb1 2048 4294967294 2147482623+ fd Linux raid autodetect
Disk /dev/sdd: 24003.1 GB, 24003062267904 bytes
/dev/sdd1 2048 4294967294 2147482623+ fd Linux raid autodetect
Disk /dev/sde: 8001.6 GB, 8001563222016 bytes
/dev/sde1 2048 4294967294 2147482623+ fd Linux raid autodetect
sda
就是系统空间,我想用别人来存储数据。
答案1
你的命令不正确,应该是这样:
$ mdadm -C /dev/md0 -l 5 -n 4 /dev/sd[b-e]1
如果你想使用这些=
标志,你可以使用这些开关,如下所示:
$ mdadm -C /dev/md0 --level=5 --raid-devices=4 /dev/sd[b-e]1
每个手册页:
-l, --level=
Set RAID level. When used with --create, options are: linear, raid0, 0,
stripe, raid1, 1, mirror, raid4, 4, raid5, 5, raid6, 6, raid10, 10,
multipath, mp, faulty, container. Obviously some of these are synonymous.