$ sensors
Adapter: Virtual device
temp1: +27.8°C (crit = +105.0°C)
temp2: +29.8°C (crit = +105.0°C)
coretemp-isa-0000
Adapter: ISA adapter
Physical id 0: +30.0°C (high = +80.0°C, crit = +100.0°C)
Core 0: +30.0°C (high = +80.0°C, crit = +100.0°C)
Core 1: +29.0°C (high = +80.0°C, crit = +100.0°C)
Core 2: +25.0°C (high = +80.0°C, crit = +100.0°C)
Core 3: +23.0°C (high = +80.0°C, crit = +100.0°C)
it8728-isa-0a30
Adapter: ISA adapter
in0: +0.01 V (min = +0.00 V, max = +3.06 V)
in1: +2.02 V (min = +0.00 V, max = +3.06 V)
in2: +2.04 V (min = +0.00 V, max = +3.06 V)
in3: +2.03 V (min = +0.00 V, max = +3.06 V)
in4: +0.01 V (min = +0.00 V, max = +3.06 V)
in5: +1.79 V (min = +0.00 V, max = +3.06 V)
in6: +1.54 V (min = +0.00 V, max = +3.06 V)
3VSB: +3.38 V (min = +0.00 V, max = +6.12 V)
Vbat: +3.00 V
fan1: 1066 RPM (min = 0 RPM)
fan2: 0 RPM (min = 0 RPM)
fan3: 0 RPM (min = 0 RPM)
fan4: 0 RPM (min = 0 RPM)
fan5: 0 RPM (min = 0 RPM)
temp1: +25.0°C (low = +127.0°C, high = +127.0°C) sensor = thermistor
temp2: -128.0°C (low = +127.0°C, high = +127.0°C) sensor = disabled
temp3: +21.0°C (low = +127.0°C, high = +127.0°C) sensor = Intel PECI
intrusion0: ALARM
lm-sensors
如何理解尤其是in0
~ in6
、3VSB
和 的输出Vbat
?
答案1
不同的硬件组合可能会有所不同。最好查看 BIOS/EFI 的传感器信息(它应该是正确的),然后尝试将它们与 的输出进行比较sensors
。
我不确定“适配器:虚拟设备”,它看起来类似于 CPU 或 GPU 核心。
“coretemp-isa-0000” 有 4 个核心,看起来像一个 4 核 CPU。
最后一个“it8728-isa-0a30”看起来像主板传感器。我不确定每个传感器的具体含义,除了 V 之外还有电压、风扇转速 RPM,不知道温度传感器的具体位置。这时将它们与 BIOS 进行比较可能会很有用。
网页搜索“it8728-isa-0a30”本页介绍“Gigabyte B75-D3V” 可能会有更好的描述/标签。我思考将其放在 /etc/sensors.d/ 中的文件中(然后可能需要重新启动,或者至少sudo service kmod stop
重新sudo service kmod start
启动传感器模块?)。
请参阅sensors
和sensors.conf
手册页
以下是从上面的 Gigabyte 链接粘贴的文件,尽管它确实不是看起来与您的主板相匹配,如果您想自己写标签,它可能会很有用:
# libsensors configuration file
# -----------------------------
#
# For the Gigabyte B75-D3V Rev: 1.2
#
#
#
######################################
# VOLTAGES #
# These figures are from estimations #
# based on values provided in BIOS. #
# This means that some of them may #
# be mixed up. #
######################################
##############################################
chip "it8728-isa-0a30"
########
# Fans
label fan1 "CPU-Fan"
set fan1_min 1000
label fan2 "System Fan 1"
set fan2_min 450
label fan3 "System Fan 2"
set fan3_min 450
label fan4 "System Fan 3"
set fan4_min 450
ignore fan5 #"Chassis Fan" # It is not connected, no pinout available.
################
# Temperatures
label temp1 "System Temperature"
set temp1_min 10
set temp1_max 60
ignore temp2
#label temp2 "Unknown" # Does not seem to give sensible data (Always shows 25)
label temp3 "Chipset Temperature"
set temp3_min 10
set temp3_max 55
############
# Voltages
label in0 "Vtt"
set in0_min 1.020
set in0_max 1.080
label in1 "+3.3V"
set in1_min 3.3 * 0.95
set in1_max 3.3 * 1.05
compute in1 1.635*@,@/1.635
label in2 "+12V"
set in2_min 12.0 * 0.95
set in2_max 12.0 * 1.05
compute in2 6.0*@,@/6.0
label in3 "+5V"
set in3_min 5.0 * 0.95
set in3_max 5.0 * 1.05
compute in3 2.5*@,@/2.5
label in4 "Vaxg IGD"
set in4_min 0.800
set in4_max 1.000
label in5 "CPU Vcore"
set in5_min 0.750
set in5_max 1.150
label in6 "Dram Voltage"
set in6_min 1.450
set in6_max 1.550
label in7 "3.3 VSB"
set in7_min 3.3 * 0.95
set in7_max 3.3 * 1.05
label in8 "Vbat"
# Other sensor readings
label intrusion0 "Chassis Open"
#set intrusion0_alarm 0
##############################################
chip "acpitz-virtual-0"
ignore temp1
#label temp1 "ACPI Thermal Zone 0 Temp1" # Shows always 27.8
ignore temp2
#label temp2 "ACPI Thermal Zone 0 Temp2" # Shows always 29.8