想知道这是“按设计”的还是我的 netgear 路由器的一个错误。我有一个 AP 连接到路由器（通过 EoP）如果我连接到路由器 SSID，获取 IP，然后断开连接并连接到 AP SSID，我无法获取 IP。我试过很多 AP
在 AP 上运行 TCPDUMP 我看到路由器使用针对其之前发出的 IP 的 ARP 请求来响应 DHCP Discover....
这是正常的吗？
10:44:45.086801 IP (tos 0x0, ttl 255, id 52143, offset 0, flags [none], proto UDP (17), length 328)
0.0.0.0.bootpc > 255.255.255.255.bootps: [udp sum ok] BOOTP/DHCP, Request from 24:e3:14:1f:47:1d (oui Unknown), length 300, xid 0xdb47d999, secs 2, Flags [none] (0x
0000)
Client-Ethernet-Address 24:e3:14:1f:47:1d (oui Unknown)
Vendor-rfc1048 Extensions
Magic Cookie 0x63825363
DHCP-Message Option 53, length 1: Discover
Parameter-Request Option 55, length 7:
Subnet-Mask, Classless-Static-Route, Default-Gateway, Domain-Name-Server
Domain-Name, Option 119, Option 252
MSZ Option 57, length 2: 1500
Client-ID Option 61, length 7: ether 24:e3:14:1f:47:1d
Lease-Time Option 51, length 4: 7776000
Hostname Option 12, length 11: "Adams-Phone"
END Option 255, length 0
PAD Option 0, length 0, occurs 15
10:44:45.107653 ARP, Ethernet (len 6), IPv4 (len 4), Request who-has 192.168.0.3 tell 192.168.0.1, length 46