外部扩展驱动器可以被 lsusb 和 dmesg 识别,但不能被 fdisk 或 lsblk 识别

外部扩展驱动器可以被 lsusb 和 dmesg 识别,但不能被 fdisk 或 lsblk 识别

我有一个希捷 SSD 扩展驱动器,几个月没有使用过,我正尝试将其插入我的笔记本电脑(运行 OpenSUSE Tumbleweed 的 Lenovo Yoga 460)。当我插入扩展驱动器时,我无法访问它,并且我认为它发出微弱的蜂鸣声,但我不太清楚。

它被认可lsusb

Bus 002 Device 002: ID 0bc2:231a Seagate RSS LLC Expansion Portable
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 005: ID 138a:0017 Validity Sensors, Inc. VFS 5011 fingerprint sensor
Bus 001 Device 003: ID 04ca:705a Lite-On Technology Corp. 
Bus 001 Device 002: ID 056a:504a Wacom Co., Ltd 
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

当我dmesg | tail - n 20插入后运行时,我收到有关它被识别的消息:

[  152.265336] usb 2-4: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd
[  152.286227] usb 2-4: New USB device found, idVendor=0bc2, idProduct=231a, bcdDevice= 7.07
[  152.286229] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  152.286230] usb 2-4: Product: Expansion
[  152.286231] usb 2-4: Manufacturer: Seagate
[  152.286231] usb 2-4: SerialNumber: (Serial Number)
[  152.869311] usbcore: registered new interface driver usb-storage
[  152.879025] scsi host2: uas
[  152.879653] scsi 2:0:0:0: Direct-Access     Seagate  Expansion        0707 PQ: 0 ANSI: 6
[  152.880537] sd 2:0:0:0: Attached scsi generic sg1 type 0
[  160.903627] usbcore: registered new interface driver uas

但是当我运行时sudo fdisk -l,没有列出任何内容,只有我的主笔记本电脑硬盘和我插入的 SD 卡:

Disk /dev/sda: 238.5 GiB, 256060514304 bytes, 500118192 sectors
Disk model: SanDisk SD8TB8U2
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: gpt
Disk identifier: 497E6685-2462-443E-8542-1FE0E694330E

Device         Start       End   Sectors  Size Type
/dev/sda1       2048    534527    532480  260M EFI System
/dev/sda2     534528    567295     32768   16M Microsoft reserved
/dev/sda3     567296  62007295  61440000 29.3G Microsoft basic data
/dev/sda4  498069504 500117503   2048000 1000M Windows recovery environment
/dev/sda5   62007296 166864895 104857600   50G Linux LVM
/dev/sda6  166864896 489678847 322813952  154G Linux LVM
/dev/sda7  489678848 498069503   8390656    4G Linux swap

Partition table entries are not in disk order.


Disk /dev/mmcblk0: 14.9 GiB, 15931539456 bytes, 31116288 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: gpt
Disk identifier: CBFAF77A-19BB-4312-BD54-1C0BDC7C6084

Device         Start      End  Sectors  Size Type
/dev/mmcblk0p1  2048 31116254 31114207 14.9G Microsoft basic data

同样,当我尝试运行时lsblk,没有列出任何异常的内容:

NAME        MAJ:MIN RM   SIZE RO TYPE MOUNTPOINT
sda           8:0    0 238.5G  0 disk 
├─sda1        8:1    0   260M  0 part /boot/efi
├─sda2        8:2    0    16M  0 part 
├─sda3        8:3    0  29.3G  0 part 
├─sda4        8:4    0  1000M  0 part 
├─sda5        8:5    0    50G  0 part /
├─sda6        8:6    0   154G  0 part /home
└─sda7        8:7    0     4G  0 part [SWAP]
mmcblk0     179:0    0  14.9G  0 disk 
└─mmcblk0p1 179:1    0  14.9G  0 part 

有什么方法可以让我继续挂载硬盘吗?

编辑:也没有出现lshw -class drive

  *-disk UNCLAIMED          
       description: SCSI Disk
       physical id: 0.0.0
       bus info: scsi@2:0.0.0
  *-disk
       description: ATA Disk
       product: SanDisk SD8TB8U2
       physical id: 0.0.0
       bus info: scsi@0:0.0.0
       logical name: /dev/sda
       version: 3101
       serial: 180131802685
       size: 238GiB (256GB)
       capabilities: gpt-1.00 partitioned partitioned:gpt
       configuration: ansiversion=5 guid=497e6685-2462-443e-8542-1fe0e694330e logicalsectorsize=512 sectorsize=512

相关内容