我的 USB 最后一次格式化。我使用 rufus 创建了一个可启动的 Windows 磁盘。当启动失败时，我尝试在正在运行的操作系统上打开它，但无法安装。以下是症状
- 磁盘检测闪存驱动器的品牌和大小。
- 识别分区并提示打开它们。
- 插入“重置高速日志”后 30 秒显示
- 35 秒后，显示第一个红色错误“错误 -100”
- 47 秒后，其余错误连续显示，闪存被移除，
lsblk并且没有插入任何其他痕迹。
该闪存驱动器相对较新，仅使用了 6 个月。
以下是相关内容消息闪存驱动器活动的输出。
[190234.263514] usb 2-1: USB disconnect, device number 2
[190276.917031] usb 2-1: new SuperSpeed Gen 1 USB device number 3 using xhci_hcd
[190276.934403] usb 2-1: New USB device found, idVendor=0781, idProduct=5583, bcdDevice= 1.00
[190276.934414] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[190276.934419] usb 2-1: Product: Ultra Fit
[190276.934422] usb 2-1: Manufacturer: SanDisk
[190276.934424] usb 2-1: SerialNumber: 4C530001250424113103
[190276.936486] usb-storage 2-1:1.0: USB Mass Storage device detected
[190276.938540] scsi host3: usb-storage 2-1:1.0
[190277.954698] scsi 3:0:0:0: Direct-Access SanDisk Ultra Fit 1.00 PQ: 0 ANSI: 6
[190277.956320] sd 3:0:0:0: [sdb] 60063744 512-byte logical blocks: (30.8 GB/28.6 GiB)
[190277.957797] sd 3:0:0:0: [sdb] Write Protect is off
[190277.957800] sd 3:0:0:0: [sdb] Mode Sense: 43 00 00 00
[190277.958071] sd 3:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[190277.987407] sdb: sdb1 sdb2
[190277.989468] sd 3:0:0:0: [sdb] Attached SCSI removable disk
[190315.526754] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[190320.863579] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[190321.070140] usb 2-1: device not accepting address 3, error -62
[190326.406791] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[190331.740112] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[190331.946791] usb 2-1: device not accepting address 3, error -62
[190332.170213] usb 2-1: Device not responding to setup address.
[190332.383702] usb 2-1: Device not responding to setup address.
[190332.590070] usb 2-1: device not accepting address 3, error -71
[190332.813459] usb 2-1: Device not responding to setup address.
[190333.026932] usb 2-1: Device not responding to setup address.
[190333.233542] usb 2-1: device not accepting address 3, error -71
[190333.286881] usb 2-1: USB disconnect, device number 3
[190333.540221] usb 2-1: Device not responding to setup address.
[190333.750196] usb 2-1: Device not responding to setup address.
[190333.956730] usb 2-1: device not accepting address 4, error -71
[190334.180237] usb 2-1: Device not responding to setup address.
[190334.393486] usb 2-1: Device not responding to setup address.
[190334.600036] usb 2-1: device not accepting address 5, error -71
[190334.626793] usb usb2-port1: attempt power cycle
[190335.556966] usb 2-1: Device not responding to setup address.
[190335.766961] usb 2-1: Device not responding to setup address.
[190335.973424] usb 2-1: device not accepting address 6, error -71
[190336.193456] usb 2-1: Device not responding to setup address.
[190336.403673] usb 2-1: Device not responding to setup address.
[190336.610075] usb 2-1: device not accepting address 7, error -71
[190336.636803] usb usb2-port1: unable to enumerate USB device