Windows 10 Pro x64 v1909 更新失败：
问题似乎是由 WinRE 的问题引起的，如果我尝试重置 PC 也会收到错误。
- 我尝试重置
ReAgent.xml[失败] 并移动/恢复winre.wim到%WinDir%\system32\Recovery，然后运行reagentc /enabled[成功]，但是当我/info再次运行时，它显示已禁用并且winre.wim路径消失了。
ReAgentc /Info：
-
Windows Recovery Environment (Windows RE) and system reset configuration Information: Windows RE status: Disabled Windows RE location: Boot Configuration Data (BCD) identifier: 00000000-0000-0000-0000-000000000000 Recovery image location: Recovery image index: 0 Custom image location: Custom image index: 0 ReAgentc: Operation Successful.
BCDedit /Enum all：
-
Windows Boot Manager -------------------- identifier {bootmgr} device partition=\Device\HarddiskVolume1 description Windows Boot Manager default {current} resumeobject {0dfb2af9-a292-11e9-ba4c-806e6f6e6963} displayorder {current} timeout 30 Windows Boot Loader ------------------- identifier {current} device partition=C: path \Windows\system32\winload.exe description Microsoft Windows 10 x64 Edition recoverysequence {00000000-0000-0000-0000-000000000000} recoveryenabled Yes osdevice partition=C: systemroot \Windows resumeobject {0dfb2af9-a292-11e9-ba4c-806e6f6e6963} nocrashautoreboot No lastknowngood No Resume from Hibernate --------------------- identifier {0dfb2af9-a292-11e9-ba4c-806e6f6e6963} device partition=C: path \Windows\system32\winresume.exe description Microsoft Windows 10 x64 Edition inherit {resumeloadersettings} recoverysequence {00000000-0000-0000-0000-000000000000} recoveryenabled Yes filedevice partition=C: filepath \hiberfil.sys debugoptionenabled No
ReAgentc /Enable日志档案：
-
10:37:08, Info [ReAgentc] ------------------------------------------------------ 10:37:08, Info [ReAgentc] -----Executing command line: reagentc /?----- 10:37:08, Info [ReAgentc] ------------------------------------------------------ 10:37:08, Info [ReAgentc] ------------------------------------------------------ 10:37:08, Info [ReAgentc] -----Exiting command line: reagentc /?, Error: 0----- 10:37:08, Info [ReAgentc] ------------------------------------------------------ 10:37:26, Info [ReAgentc] ------------------------------------------------------ 10:37:26, Info [ReAgentc] -----Executing command line: reagentc /v----- 10:37:26, Info [ReAgentc] ------------------------------------------------------ 10:37:26, Info [ReAgentc] ------------------------------------------------------ 10:37:26, Info [ReAgentc] -----Exiting command line: reagentc /v, Error: 87----- 10:37:26, Info [ReAgentc] ------------------------------------------------------ 10:40:00, Info [ReAgentc] ------------------------------------------------------ 10:40:00, Info [ReAgentc] -----Executing command line: reagentc /info----- 10:40:00, Info [ReAgentc] ------------------------------------------------------ 10:40:00, Info [ReAgentc] Enter WinReGetConfig 10:40:00, Info [ReAgentc] Parameters: configWinDir: NULL 10:40:00, Info [ReAgentc] WinRE config file path: C:\Windows\system32\Recovery\ReAgent.xml 10:40:00, Info [ReAgentc] Update enhanced config info is enabled. 10:40:00, Error [ReAgentc] BcdOpenObject(WinRE) failed: 0xc0000034 10:40:00, Info [ReAgentc] winreGetWinReGuid returning 0X2 10:40:00, Info [ReAgentc] ReAgentConfig::ReadBcdAndUpdateEnhancedConfigInfo WinRE disabled, WinRE Guid could not be determined (0x2) 10:40:00, Info [ReAgentc] WinRE is staged 10:40:00, Info [ReAgentc] System is WimBoot: FALSE 10:40:00, Info [ReAgentc] Exit WinReGetConfig return value: 1, last error: 0x0 10:40:00, Info [ReAgentc] ------------------------------------------------------ 10:40:00, Info [ReAgentc] -----Exiting command line: reagentc /info, Error: 0----- 10:40:00, Info [ReAgentc] ------------------------------------------------------ 10:40:05, Info [ReAgentc] ------------------------------------------------------ 10:40:05, Info [ReAgentc] -----Executing command line: reagentc /enable----- 10:40:05, Info [ReAgentc] ------------------------------------------------------ 10:40:05, Info [ReAgentc] Enter WinRECheckGuid 10:40:05, Info [ReAgentc] Parameter: TargetOsGuid: : NULL 10:40:05, Info [ReAgentc] Exit WinRECheckGuid return error code: 0x0 10:40:05, Info [ReAgentc] Enter WinReInstall 10:40:05, Info [ReAgentc] Parameter: ReInstallBecauseOfBitlocker: 0 10:40:05, Info [ReAgentc] --Install on target OS step 1: collect info like partition list, loading reagent.xml, source winre.wim and partition 10:40:05, Info [ReAgentc] Enumerate and log all fixed partitions: 10:40:05, Info [ReAgentc] --Partition info-- 10:40:05, Info [ReAgentc] VolumeName: \\?\Volume{55abc128-0000-0000-0000-602200000000}, PartitionName: \\?\GLOBALROOT\device\harddisk0\partition2 10:40:05, Info [ReAgentc] Partition number: 2, offset: 576716800, free space: 299773304832, total space: 511531372544 10:40:05, Info [ReAgentc] DiskNumber:0, DiskSignature:1437319464, NTFS:1, Mbr:1, Active:0, Boot:1, BitlockerEnabled:0 10:40:05, Info [ReAgentc] MBR partition id: 0x7 10:40:05, Info [ReAgentc] DiskId: {00000000-0000-0000-0000-000000000000} 10:40:05, Info [ReAgentc] --Partition info-- 10:40:05, Info [ReAgentc] VolumeName: \\?\Volume{55abc128-0000-0000-0000-100000000000}, PartitionName: \\?\GLOBALROOT\device\harddisk0\partition1 10:40:05, Info [ReAgentc] Partition number: 1, offset: 1048576, free space: 541589504, total space: 575664128 10:40:05, Info [ReAgentc] DiskNumber:0, DiskSignature:1437319464, NTFS:1, Mbr:1, Active:1, Boot:0, BitlockerEnabled:0 10:40:05, Info [ReAgentc] MBR partition id: 0x7 10:40:05, Info [ReAgentc] DiskId: {00000000-0000-0000-0000-000000000000} 10:40:05, Info [ReAgentc] Get downlevel ReAgent config 10:40:05, Info [ReAgentc] Downlevel config file path: \Recovery\ReAgentOld.xml 10:40:05, Info [ReAgentc] Checking for downlevel WinRE installation. 10:40:05, Info [ReAgentc] First round search 10:40:05, Info [ReAgentc] Get ReAgent config 10:40:05, Info [ReAgentc] GetReAgentConfig Config file path: C:\Windows\system32\Recovery\ReAgent.xml 10:40:05, Info [ReAgentc] CheckRegKey test hook (SystemSetupInProgress) present and disabled 10:40:05, Info [ReAgentc] Update enhanced config info is enabled. 10:40:05, Error [ReAgentc] BcdOpenObject(WinRE) failed: 0xc0000034 10:40:05, Info [ReAgentc] winreGetWinReGuid returning 0X2 10:40:05, Info [ReAgentc] ReAgentConfig::ReadBcdAndUpdateEnhancedConfigInfo WinRE disabled, WinRE Guid could not be determined (0x2) 10:40:05, Info [ReAgentc] --Install on target OS step 2: detect and fix if there is any issue for winre settings 10:40:05, Info [ReAgentc] DetectAndFixWinReIssues (WinRE)WinRE is already installed, setting BCD entry (winre location \\?\GLOBALROOT\device\harddisk0\partition2\Recovery\WindowsRE) 10:40:05, Error [ReAgentc] BcdOpenObject(WinRE) failed: 0xc0000034 10:40:05, Info [ReAgentc] winreGetWinReGuid returning 0X2 10:40:05, Info [ReAgentc] DetectAndFixWinReIssues Failed to get WinRE GUID. 10:40:05, Info [ReAgentc] DetectAndFixWinReIssues Will fix the BCD entry. 10:40:05, Error [ReAgentc] BcdOpenObject(WinRE) failed: 0xc0000034 10:40:05, Info [ReAgentc] winreGetWinReGuid returning 0X2 10:40:05, Info [ReAgentc] NOTE: WILL RETRY. We have to uninstall WinRE and retry because WinRE is installed but its BCD entry is not present. 10:40:05, Info [ReAgentc] DetectAndFixWinReIssues Copying Winre.wim from \\?\GLOBALROOT\device\harddisk0\partition2\Recovery\WindowsRE to staging location 10:40:05, Info [ReAgentc] winreCopyWIMBack moved WIM file from \\?\GLOBALROOT\device\harddisk0\partition2\Recovery\WindowsRE\ to C:\Windows\system32\Recovery\Winre.wim successfully! 10:40:05, Info [ReAgentc] DetectAndFixWinReIssues we should retry because winre installation was changed. 10:40:05, Error [ReAgentc] failed to detect and fix winre issues, error:0x2 10:40:05, Info [ReAgentc] Exit WinReInstall return value: 0, last error: 0x2 10:40:05, Error [ReAgentc] failed to install winre: : 0x2 10:40:05, Info [ReAgentc] ------------------------------------------------------ 10:40:05, Info [ReAgentc] -----Exiting command line: reagentc /enable, Error: 2----- 10:40:05, Info [ReAgentc] ------------------------------------------------------ 10:40:08, Info [ReAgentc] ------------------------------------------------------ 10:40:08, Info [ReAgentc] -----Executing command line: reagentc /enable----- 10:40:08, Info [ReAgentc] ------------------------------------------------------ 10:40:08, Info [ReAgentc] Enter WinRECheckGuid 10:40:08, Info [ReAgentc] Parameter: TargetOsGuid: : NULL 10:40:08, Info [ReAgentc] Exit WinRECheckGuid return error code: 0x0 10:40:08, Info [ReAgentc] Enter WinReInstall 10:40:08, Info [ReAgentc] Parameter: ReInstallBecauseOfBitlocker: 0 10:40:08, Info [ReAgentc] --Install on target OS step 1: collect info like partition list, loading reagent.xml, source winre.wim and partition 10:40:08, Info [ReAgentc] Enumerate and log all fixed partitions: 10:40:08, Info [ReAgentc] --Partition info-- 10:40:08, Info [ReAgentc] VolumeName: \\?\Volume{55abc128-0000-0000-0000-602200000000}, PartitionName: \\?\GLOBALROOT\device\harddisk0\partition2 10:40:08, Info [ReAgentc] Partition number: 2, offset: 576716800, free space: 300220190720, total space: 511531372544 10:40:08, Info [ReAgentc] DiskNumber:0, DiskSignature:1437319464, NTFS:1, Mbr:1, Active:0, Boot:1, BitlockerEnabled:0 10:40:08, Info [ReAgentc] MBR partition id: 0x7 10:40:08, Info [ReAgentc] DiskId: {00000000-0000-0000-0000-000000000000} 10:40:08, Info [ReAgentc] --Partition info-- 10:40:08, Info [ReAgentc] VolumeName: \\?\Volume{55abc128-0000-0000-0000-100000000000}, PartitionName: \\?\GLOBALROOT\device\harddisk0\partition1 10:40:08, Info [ReAgentc] Partition number: 1, offset: 1048576, free space: 541589504, total space: 575664128 10:40:08, Info [ReAgentc] DiskNumber:0, DiskSignature:1437319464, NTFS:1, Mbr:1, Active:1, Boot:0, BitlockerEnabled:0 10:40:08, Info [ReAgentc] MBR partition id: 0x7 10:40:08, Info [ReAgentc] DiskId: {00000000-0000-0000-0000-000000000000} 10:40:08, Info [ReAgentc] Get downlevel ReAgent config 10:40:08, Info [ReAgentc] Downlevel config file path: \Recovery\ReAgentOld.xml 10:40:08, Info [ReAgentc] Checking for downlevel WinRE installation. 10:40:08, Info [ReAgentc] First round search 10:40:08, Info [ReAgentc] Get ReAgent config 10:40:08, Info [ReAgentc] GetReAgentConfig Config file path: C:\Windows\system32\Recovery\ReAgent.xml 10:40:08, Info [ReAgentc] CheckRegKey test hook (SystemSetupInProgress) present and disabled 10:40:08, Info [ReAgentc] Update enhanced config info is enabled. 10:40:08, Error [ReAgentc] BcdOpenObject(WinRE) failed: 0xc0000034 10:40:08, Info [ReAgentc] winreGetWinReGuid returning 0X2 10:40:08, Info [ReAgentc] ReAgentConfig::ReadBcdAndUpdateEnhancedConfigInfo WinRE disabled, WinRE Guid could not be determined (0x2) 10:40:08, Info [ReAgentc] FindWinReSourceImageAndPartition No source winre.wim was specified. Checking for a staged winre.wim. 10:40:08, Info [ReAgentc] FindWinReSourceImageAndPartition using winre.wim from C:\Windows\system32\Recovery 10:40:08, Info [ReAgentc] --Install on target OS step 2: detect and fix if there is any issue for winre settings 10:40:08, Info [ReAgentc] DetectAndFixWinReIssues nothing to do because winre is not enabled. 10:40:08, Info [ReAgentc] --Install on target OS step 3: check if we can keep winre.wim in the same partition if it is staged. 10:40:08, Info [ReAgentc] --Install on target OS step 4: check if we can put winre.wim in other partitions or create one if needed. 10:40:08, Info [ReAgentc] CanPutWinREOnOtherPartitions WinRE is not staged. Searching for a suitable partition for WinRE. 10:40:08, Info [ReAgentc] Entering FindTargetPartition 10:40:08, Info [ReAgentc] RegLoadKey $OFFLINE$SYSTEM failed. Error: 0x522. 10:40:08, Info [ReAgentc] Not allowed to repartition the disk 10:40:08, Info [ReAgentc] Start looping through each partition and initialize os partition, recovery partition and system partition for MBR 10:40:08, Info [ReAgentc] Checking partition at offset 576716800, partition number: 2 10:40:08, Info [ReAgentc] find OS partition 10:40:08, Info [ReAgentc] Checking partition at offset 1048576, partition number: 1 10:40:08, Info [ReAgentc] NOTE: find system partition and not OS partition for MBR 10:40:08, Info [ReAgentc] Complete looping through each partition 10:40:08, Info [ReAgentc] ----Search target partition option #1: try existing WinRE partition 10:40:08, Info [ReAgentc] ----Search target partition option #2: try first recovery partition 10:40:08, Info [ReAgentc] ----Search target partition option #3: try system partition for MBR 10:40:08, Info [ReAgentc] MeetPartitionRequirements Partition details: {Offset: 1048576, Free space: 541589504, Total space: 575664128} 10:40:08, Info [ReAgentc] MeetPartitionRequirements WinRE WIM size: 443717121 10:40:08, Info [ReAgentc] MeetPartitionRequirements Required free space: 831690241 10:40:08, Warning [ReAgentc] MeetPartitionRequirements Not enough free space req = 831690241 avail = 541589504 offset = 1048576 10:40:08, Info [ReAgentc] ----Search target partition option #4: try new recovery partition if allowed 10:40:08, Info [ReAgentc] ----Search target partition option #5: try target OS partition 10:40:08, Info [ReAgentc] MeetPartitionRequirements Partition details: {Offset: 576716800, Free space: 300220190720, Total space: 511531372544} 10:40:08, Info [ReAgentc] MeetPartitionRequirements WinRE WIM size: 443717121 10:40:08, Info [ReAgentc] MeetPartitionRequirements Required free space: 52428800 10:40:08, Info [ReAgentc] Found target partition: use target OS partition, offset: 576716800 10:40:08, Info [ReAgentc] Exit FindTargetPartition returns with status code: 0x0 10:40:08, Info [ReAgentc] --Install on target OS step 5: set WinRE settings and restore system to a good state when hitting any errors 10:40:08, Info [ReAgentc] Enter SetWinRESettings 10:40:08, Info [ReAgentc] RegLoadKey $OFFLINE$SYSTEM failed. Error: 0x522. 10:40:08, Info [ReAgentc] Copying WinRE from C:\Windows\system32\Recovery to staging location on \\?\GLOBALROOT\device\harddisk0\partition2 10:40:08, Info [ReAgentc] RegLoadKey $OFFLINE$SYSTEM failed. Error: 0x522. 10:40:08, Info [ReAgentc] Copied WinRE to staging location 10:40:08, Info [ReAgentc] Creating BCD entry 10:40:08, Error [ReAgentc] BcdGetElementData failed: 0xc0000225 10:40:08, Info [ReAgentc] WinRE created BCD entry: : {00000000-0000-0000-0000-000000000000} 10:40:08, Info [ReAgentc] Moving Winre and boot.sdi from staging location to target 10:40:08, Info [ReAgentc] Moved Winre and boot.sdi from staging location to target 10:40:08, Info [ReAgentc] Updating reagent.xml 10:40:08, Info [ReAgentc] Set WinRE location path to: \Recovery\WindowsRE 10:40:08, Info [ReAgentc] Set recovery guid 10:40:08, Info [ReAgentc] Set scheduled operation: WinReNoOperation 10:40:08, Info [ReAgentc] Set OS build version: 17763.1.amd64fre.rs5_release.180914-1434 10:40:08, Info [ReAgentc] Set Wimboot state: 0 10:40:08, Info [ReAgentc] Set install state to: enabled 10:40:08, Info [ReAgentc] Setting the recovery sequence for the target OS. 10:40:08, Info [ReAgentc] Machine firmware is not EFI, nothing to do 10:40:08, Info [ReAgentc] Creating backup of reagent.xml 10:40:08, Info [ReAgentc] Created backup of reagent.xml 10:40:08, Info [ReAgentc] Configuring the WinRE validation task. 10:40:08, Info [ReAgentc] Failed to clear WIM file trusted state: 0x2 10:40:08, Info [ReAgentc] Failed to clear WIM file hash: 0x2 10:40:08, Info [ReAgentc] Update enhanced config info is enabled. 10:40:08, Error [ReAgentc] BcdOpenObject(WinRE) failed: 0xc0000034 10:40:08, Info [ReAgentc] winreGetWinReGuid returning 0X2 10:40:08, Info [ReAgentc] ReAgentConfig::ReadBcdAndUpdateEnhancedConfigInfo WinRE disabled, WinRE Guid could not be determined (0x2) 10:40:08, Info [ReAgentc] Failed to find winre.wim because WinRE is not installed. 10:40:08, Info [ReAgentc] WinReValidateRecoveryWimInternal took 16 ms. 10:40:08, Warning [ReAgentc] WinReValidateRecoveryWimInternal failed: 0x490 10:40:08, Warning [ReAgentc] winreConfigureValidationTask failed: 0x490, a non critical error 10:40:08, Info [ReAgentc] Completed the WinRE validation task. 10:40:08, Info [ReAgentc] Creating backup of customization file 10:40:08, Warning [ReAgentc] Recovery file not found at C:\Windows\system32\Recovery\ReCustomization.xml 10:40:08, Warning [ReAgentc] winreBackupRecoveryFile (C:\Windows\system32\Recovery\ReCustomization.xml, ReCustomization.xml) failed, Err: 2 10:40:08, Info [ReAgentc] Created backup of customization file 10:40:08, Info [ReAgentc] SetWinRESettings return with error code 0x0 10:40:08, Info [ReAgentc] WinReInstallOnTargetOSInternal WinRE installation completed successfully. 10:40:08, Info [ReAgentc] Exit WinReInstall return value: 1, last error: 0x0 10:40:08, Info [ReAgentc] Enter WinReSetConfig 10:40:08, Info [ReAgentc] Parameters: configWinDir: NULL 10:40:08, Info [ReAgentc] Update enhanced config info is enabled. 10:40:08, Error [ReAgentc] BcdOpenObject(WinRE) failed: 0xc0000034 10:40:08, Info [ReAgentc] winreGetWinReGuid returning 0X2 10:40:08, Info [ReAgentc] ReAgentConfig::ReadBcdAndUpdateEnhancedConfigInfo WinRE disabled, WinRE Guid could not be determined (0x2) 10:40:08, Info [ReAgentc] WinRE is not installed, nothing to back up 10:40:08, Info [ReAgentc] Exit WinReSetConfig return value: 1, last error: 0x0 10:40:08, Info [ReAgentc] Clear non critical error when enabling auto repair 10:40:08, Info [ReAgentc] ------------------------------------------------------ 10:40:08, Info [ReAgentc] -----Exiting command line: reagentc /enable, Error: 0----- 10:40:08, Info [ReAgentc] ------------------------------------------------------ 10:42:05, Info [ReAgentc] ------------------------------------------------------ 10:42:05, Info [ReAgentc] -----Executing command line: reagentc /info----- 10:42:05, Info [ReAgentc] ------------------------------------------------------ 10:42:05, Info [ReAgentc] Enter WinReGetConfig 10:42:05, Info [ReAgentc] Parameters: configWinDir: NULL 10:42:05, Info [ReAgentc] WinRE config file path: C:\Windows\system32\Recovery\ReAgent.xml 10:42:05, Info [ReAgentc] Update enhanced config info is enabled. 10:42:05, Error [ReAgentc] BcdOpenObject(WinRE) failed: 0xc0000034 10:42:05, Info [ReAgentc] winreGetWinReGuid returning 0X2 10:42:05, Info [ReAgentc] ReAgentConfig::ReadBcdAndUpdateEnhancedConfigInfo WinRE disabled, WinRE Guid could not be determined (0x2) 10:42:05, Info [ReAgentc] System is WimBoot: FALSE 10:42:05, Info [ReAgentc] Exit WinReGetConfig return value: 1, last error: 0x0 10:42:05, Info [ReAgentc] ------------------------------------------------------ 10:42:05, Info [ReAgentc] -----Exiting command line: reagentc /info, Error: 0----- 10:42:05, Info [ReAgentc] ------------------------------------------------------
答案1
解决方案是使用/OSguidWindows 启动加载程序和 Windows 启动管理器，而不是 Windows 恢复环境或 Windows 恢复应用程序：
ReAgentc /Enable /OSguid {GUID}
- 您的 GUID 列为
{current}，因此运行以下命令，它将为您提供 GUID，然后您就可以启用它了：BCDedit /V /Enum all
答案2
WinRE 不应存储在系统分区或启动分区 [BIOS] 上，因为如果任一分区出现问题，它会阻止启动恢复
默认winre.wim位置是不是 %WinDir%\system32\Recovery：
- BIOS： （WinRE 应该位于其自己的分区上 -仅有的Windows 10 全新安装即可）
- Windows ≥10：
\\WinRE_partition\Recovery\WindowsRE
（升级：C:\Recovery\WindowsRE） - Windows ≤ 8.1：
C:\Recovery\WindowsRE
- Windows ≥10：
- UEFI：
\\WinRE_partition\Recovery\WindowsRE
要解决，请选择 #2 或 #3：（ReAgentc）
- 打开行政终端：
+R→打开：powershell→CTRL+SHIFT+好的 - 确保
winre.wim在范围内C:\Recovery\WindowsRE并设置正确的路径：ReAgentc /Disable ; ReAgentC /SetREimage /Path "C:\Recovery\WindowsRE" ; ReAgentc /Enable ; ReAgentc /Info
- 或者 - - 将 WinRE 移至其自己的分区：
- 备用电流
winre.wim：- 验证是否
C:\Windows\System32\Recovery\WinRE.wim存在：Ls "C:\Windows\System32\Recovery" | FindStr /I "WinRE.wim" ; ls "C:\Windows\System32\Recovery" -Hidden | FindStr /I "WinRE.wim" - 如果没有的话：
Xcopy /H "C:\Recovery\WindowsRE\WinRE.wim" "C:\Windows\System32\Recovery"- BIOS：可能将 WinRE 存储在启动分区上：将启动装载于
Y:→ 更新 WIM 路径
- BIOS：可能将 WinRE 存储在启动分区上：将启动装载于
- 验证是否
- 创建 650MB WinRE 分区： +R→打开：
DiskPart→ 确定::# WinRE partition should have ~300MB free for future winre.wim size increases ::# Select OS partition: sel vol c ::# Shrink partition by 665MB [RAW]: shrink desired=665 minimum=650 ::# Create WinRE partition: ::# BIOS: cre par pri size=665 id=27 ::# UEFI: cre par pri size=665 id=de94bba4-06d1-4d40-a16a-bfd50179d6ac gpt attributes=0x8000000000000001 ::# Format partition: format fs=ntfs quick label=WinRE ::# Mount partition: assign letter=z exit
- 禁用 WinRE，设置 的自定义位置
winre.wim，然后重新启用 WinRE：# Copy WinRE.wim: MkDir "Z:\Recovery\WindowsRE" ; Xcopy /H "C:\Recovery\WindowsRE\WinRE.wim" "Z:\Recovery\WindowsRE" # Disable WinRE: ReAgentC /Disable # Set Custom WinRE Path: ReAgentC /SetREimage /Path "Z:\Recovery\WindowsRE" # Enable WinRE: ReAgentC /Enable # Verify: ReAgentC /Info # Remove WinRE mount point: DiskPart sel vol z remove exit
- 备用电流
为了解决因事实不准确而导致投票失败的误解：
- 这个答案，以及原帖者的问题，都与BCD 商店：
楼主的问题是默认winre.wim位置不是%WinDir%\system32\Recovery