☰

NetworkManager 添加连接但未设置接口

tag-icon • tag-icon wifi networkmanager
NetworkManager 添加连接但未设置接口

我运行以下命令来添加到网络管理器的新连接：

nmcli con add con-name MIDVERCORP ifname wlan0 type wifi ssid "MIDVERCORP"

当我查看配置的连接时，已添加此新连接，但接口/设备未设置为wlan0。

# nmcli con
NAME                UUID                                  TYPE      DEVICE
eth0                1c71a54a-5ef1-4e32-ad02-8427f0168645  ethernet  eth0
eth1                57ce5d30-cde3-4b07-b83f-a5935f93cb6a  ethernet  eth1
MIDVERCORP          48e53a8a-ccbb-461e-bdca-74a837aa2c98  wifi      --
Wired connection 1  0eabbb3d-40d4-3031-a46e-14d87f9ac275  ethernet  --
Wired connection 2  fc12cba9-ee87-377d-ac4e-746a2f8fd6b3  ethernet  --
static-usb0         f93578c1-d309-4103-8554-fc1982ccda02  ethernet  --

# ip link show wlan0
5: wlan0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN mode DORMANT group default qlen 1000
    link/ether c0:ee:40:50:25:c0 brd ff:ff:ff:ff:ff:ff

为了为此连接设置 wlan0 接口，我缺少什么？

编辑

要进一步显示 wifi 已启用：

# nm radio wifi on
# nm radio
WIFI-HW  WIFI     WWAN-HW  WWAN
enabled  enabled  enabled  enabled
# nm dev wifi rescan
Error: Scanning not allowed while unavailable or activating.
# ip link show wlan0
6: wlan0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN mode DORMANT group default qlen 1000
    link/ether c0:ee:40:50:25:c0 brd ff:ff:ff:ff:ff:ff
# ip addr show wlan0
6: wlan0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN group default qlen 1000
    link/ether c0:ee:40:50:25:c0 brd ff:ff:ff:ff:ff:ff

答案1

我的问题是 wpa_supplicant 没有运行。

systemctl start wpa_supplicant

然后我就可以运行nmcli dev wifi rescan; nmcli dev wifi list并查看可用的 AP。

相关内容