安装 Ubuntu 时出现错误 0x80370102。
- 我已启用 Hyper-V、虚拟机平台、Windows 虚拟机管理程序平台和适用于 Linux 的 Windows 子系统。我禁用它们，重新启动并重新启用，重新启动并重试，结果相同。
- UEFI 中启用了虚拟化。
- 我可以在 Hyper-V 中创建虚拟机，但无法运行它们。
- WSL1 运行良好。
- 我之前已经在这台电脑上运行过 WSL2，因此该硬件是受支持的。
- 没有其他虚拟化软件。
错误截图
任务管理器的屏幕截图
Hyper-V 错误的屏幕截图
services.msc 的屏幕截图
Windows 版本：Microsoft Windows [版本 10.0.19044.1415]
WSL 内核版本：5.10.60.1
相关输出get-windowsoptionalfeature -online：
FeatureName : Microsoft-Windows-Subsystem-Linux
State : Enabled
FeatureName : HypervisorPlatform
State : Enabled
FeatureName : VirtualMachinePlatform
State : Enabled
输出bcdedit /v：
Windows Boot Manager
--------------------
identifier {9dea862c-5cdd-4e70-acc1-f32b344d4795}
device partition=\Device\HarddiskVolume1
path \EFI\Microsoft\Boot\bootmgfw.efi
description Windows Boot Manager
locale en-US
inherit {7ea2e1ac-2e61-4728-aaa3-896d9d0a9f0e}
default {5552da70-e75f-11eb-89e7-b655d79896f6}
resumeobject {5552da6f-e75f-11eb-89e7-b655d79896f6}
displayorder {5552da70-e75f-11eb-89e7-b655d79896f6}
toolsdisplayorder {b2721d73-1db4-4c62-bf78-c548a880142d}
timeout 30
Windows Boot Loader
-------------------
identifier {5552da70-e75f-11eb-89e7-b655d79896f6}
device partition=C:
path \Windows\system32\winload.efi
description Windows 10
locale en-US
inherit {6efb52bf-1766-41db-a6b3-0ee5eff72bd7}
recoverysequence {3b397448-f27e-11eb-9d80-ffe132952db6}
displaymessageoverride Recovery
recoveryenabled Yes
isolatedcontext Yes
allowedinmemorysettings 0x15000075
osdevice partition=C:
systemroot \Windows
resumeobject {5552da6f-e75f-11eb-89e7-b655d79896f6}
nx OptIn
bootmenupolicy Standard
hypervisorlaunchtype Auto
输出coreinfo64：
Coreinfo v3.52 - Dump information on system CPU and memory topology
Copyright (C) 2008-2021 Mark Russinovich
Sysinternals - www.sysinternals.com
Intel(R) Core(TM) i5-6200U CPU @ 2.30GHz
Intel64 Family 6 Model 78 Stepping 3, GenuineIntel
Microcode signature: 000000CC
HTT * Hyperthreading enabled
CET - Supports Control Flow Enforcement Technology
Kernel CET - Kernel-mode CET Enabled
User CET - User-mode CET Allowed
HYPERVISOR * Hypervisor is present
VMX - Supports Intel hardware-assisted virtualization
SVM - Supports AMD hardware-assisted virtualization
X64 * Supports 64-bit mode
SMX - Supports Intel trusted execution
SKINIT - Supports AMD SKINIT
SGX - Supports Intel SGX
NX * Supports no-execute page protection
SMEP * Supports Supervisor Mode Execution Prevention
SMAP * Supports Supervisor Mode Access Prevention
PAGE1GB * Supports 1 GB large pages
PAE * Supports > 32-bit physical addresses
PAT * Supports Page Attribute Table
PSE * Supports 4 MB pages
PSE36 * Supports > 32-bit address 4 MB pages
PGE * Supports global bit in page tables
SS * Supports bus snooping for cache operations
VME * Supports Virtual-8086 mode
RDWRFSGSBASE * Supports direct GS/FS base access
FPU * Implements i387 floating point instructions
MMX * Supports MMX instruction set
MMXEXT - Implements AMD MMX extensions
3DNOW - Supports 3DNow! instructions
3DNOWEXT - Supports 3DNow! extension instructions
SSE * Supports Streaming SIMD Extensions
SSE2 * Supports Streaming SIMD Extensions 2
SSE3 * Supports Streaming SIMD Extensions 3
SSSE3 * Supports Supplemental SIMD Extensions 3
SSE4a - Supports Streaming SIMDR Extensions 4a
SSE4.1 * Supports Streaming SIMD Extensions 4.1
SSE4.2 * Supports Streaming SIMD Extensions 4.2
AES * Supports AES extensions
AVX * Supports AVX instruction extensions
AVX2 * Supports AVX2 instruction extensions
AVX-512-F - Supports AVX-512 Foundation instructions
AVX-512-DQ - Supports AVX-512 double and quadword instructions
AVX-512-IFAMA - Supports AVX-512 integer Fused multiply-add instructions
AVX-512-PF - Supports AVX-512 prefetch instructions
AVX-512-ER - Supports AVX-512 exponential and reciprocal instructions
AVX-512-CD - Supports AVX-512 conflict detection instructions
AVX-512-BW - Supports AVX-512 byte and word instructions
AVX-512-VL - Supports AVX-512 vector length instructions
FMA * Supports FMA extensions using YMM state
MSR * Implements RDMSR/WRMSR instructions
MTRR * Supports Memory Type Range Registers
XSAVE * Supports XSAVE/XRSTOR instructions
OSXSAVE * Supports XSETBV/XGETBV instructions
RDRAND * Supports RDRAND instruction
RDSEED * Supports RDSEED instruction
CMOV * Supports CMOVcc instruction
CLFSH * Supports CLFLUSH instruction
CX8 * Supports compare and exchange 8-byte instructions
CX16 * Supports CMPXCHG16B instruction
BMI1 * Supports bit manipulation extensions 1
BMI2 * Supports bit manipulation extensions 2
ADX * Supports ADCX/ADOX instructions
DCA - Supports prefetch from memory-mapped device
F16C * Supports half-precision instruction
FXSR * Supports FXSAVE/FXSTOR instructions
FFXSR - Supports optimized FXSAVE/FSRSTOR instruction
MONITOR - Supports MONITOR and MWAIT instructions
MOVBE * Supports MOVBE instruction
ERMSB * Supports Enhanced REP MOVSB/STOSB
PCLMULDQ * Supports PCLMULDQ instruction
POPCNT * Supports POPCNT instruction
LZCNT * Supports LZCNT instruction
SEP * Supports fast system call instructions
LAHF-SAHF * Supports LAHF/SAHF instructions in 64-bit mode
HLE - Supports Hardware Lock Elision instructions
RTM - Supports Restricted Transactional Memory instructions
DE * Supports I/O breakpoints including CR4.DE
DTES64 * Can write history of 64-bit branch addresses
DS * Implements memory-resident debug buffer
DS-CPL - Supports Debug Store feature with CPL
PCID * Supports PCIDs and settable CR4.PCIDE
INVPCID * Supports INVPCID instruction
PDCM * Supports Performance Capabilities MSR
RDTSCP * Supports RDTSCP instruction
TSC * Supports RDTSC instruction
TSC-DEADLINE - Local APIC supports one-shot deadline timer
TSC-INVARIANT * TSC runs at constant rate
xTPR * Supports disabling task priority messages
EIST * Supports Enhanced Intel Speedstep
ACPI * Implements MSR for power management
TM * Implements thermal monitor circuitry
TM2 * Implements Thermal Monitor 2 control
APIC * Implements software-accessible local APIC
x2APIC - Supports x2APIC
CNXT-ID - L1 data cache mode adaptive or BIOS
MCE * Supports Machine Check, INT18 and CR4.MCE
MCA * Implements Machine Check Architecture
PBE * Supports use of FERR#/PBE# pin
PSN - Implements 96-bit processor serial number
PREFETCHW * Supports PREFETCHW instruction
Maximum implemented CPUID leaves: 00000016 (Basic), 80000008 (Extended).
Maximum implemented address width: 48 bits (virtual), 39 bits (physical).
Processor signature: 000406E3
Logical to Physical Processor Map:
**-- Physical Processor 0 (Hyperthreaded)
--** Physical Processor 1 (Hyperthreaded)
Logical Processor to Socket Map:
**** Socket 0
Logical Processor to NUMA Node Map:
**** NUMA Node 0
No NUMA nodes.
Logical Processor to Cache Map:
**-- Data Cache 0, Level 1, 32 KB, Assoc 8, LineSize 64
**-- Instruction Cache 0, Level 1, 32 KB, Assoc 8, LineSize 64
**-- Unified Cache 0, Level 2, 256 KB, Assoc 4, LineSize 64
**** Unified Cache 1, Level 3, 3 MB, Assoc 12, LineSize 64
--** Data Cache 1, Level 1, 32 KB, Assoc 8, LineSize 64
--** Instruction Cache 1, Level 1, 32 KB, Assoc 8, LineSize 64
--** Unified Cache 2, Level 2, 256 KB, Assoc 4, LineSize 64
Logical Processor to Group Map:
**** Group 0
提取和加载 (ETL)：等离子
答案1
我按照以下步骤自行修复了这个问题：
- 打开 Windows 安全中心。
- 转到应用程序和浏览器控制。
- 转到漏洞保护设置。
- 转到程序设置。
C:\Windows\System32\vmcompute.exe将系统覆盖设置C:\Windows\System32\vmwp.exe为 0。- 重新启动这些进程。
现在我可以运行虚拟机以及安装 WSL2 发行版。