如何在 Debian 10 上配置双显示器设置?

如何在 Debian 10 上配置双显示器设置?

我有一台安装了 Debian 10(稳定版)的笔记本电脑。我当前的设置是这样的:

我将笔记本电脑的嵌入式屏幕作为一个显示器,一个通过 HDMI 连接的外部显示器,现在我通过以下方式连接了第二个外部显示器(与第一个相同)HDMI-USB3 适配器因为我的笔记本电脑没有任何其他端口,也没有 GPU(仅通过 Intel CPU 芯片集成显卡)。

我已经成功安装了显示链接-debian司机,这是官方 DisplayLink Ubuntu 驱动程序的修改版本,而我的新显示器却找不到。

在这里您可以看到驱动程序的调试(当我安装它时,20-displaylink.conf没有生成该文件。我必须自己将其放入/etc/X11/xorg.conf.d//usr/share/X11/xorg.conf.d/然后创建带有调试中打印的信息的提到的文件(我从这里):

--------------- Linux系统信息----------------

发行版:Debian
发行版:buster
内核:4.19.0-9-amd64

---------------- 显示链接信息 ----------------

驱动程序版本:1.7.0
DisplayLink 服务状态:已启动并正在运行
EVDI 服务版本:1.7.0

------------------ 显卡 -----------------

供应商: i915
子系统: 处理器
VGA: Intel Corporation Atom 处理器 Z36xxx/Z37xxx 系列图形和显示器 (rev 0e)
VGA (3D):
X11 版本: 1.20.4-1
X11 配置: /etc/X11/xorg.conf.d/ 20-displaylink.conf

-------------- DisplayLink xorg.conf -------------

文件:/etc/X11/xorg.conf.d/20-displaylink.conf
内容:
部分“设备”
标识符“DisplayLink”
驱动程序“modesetting”
选项“PageFlip”“false”
结束部分

运行时xrandr我得到以下输出:

Screen 0: minimum 320 x 200, current 1920 x 1080, maximum 8192 x 8192
eDP-1 connected (normal left inverted right x axis y axis)
   1366x768      59.99 +  40.00  
   1360x768      59.80    59.96  
   1280x720      60.00    59.99    59.86    59.74  
   1024x768      60.04    60.00  
   960x720       60.00  
   928x696       60.05  
   896x672       60.01  
   1024x576      59.95    59.96    59.90    59.82  
   960x600       59.93    60.00  
   960x540       59.96    59.99    59.63    59.82  
   800x600       60.00    60.32    56.25  
   840x525       60.01    59.88  
   864x486       59.92    59.57  
   800x512       60.17  
   700x525       59.98  
   800x450       59.95    59.82  
   640x512       60.02  
   720x450       59.89  
   700x450       59.96    59.88  
   640x480       60.00    59.94  
   720x405       59.51    58.99  
   684x384       59.88    59.85  
   680x384       59.80    59.96  
   640x400       59.88    59.98  
   576x432       60.06  
   640x360       59.86    59.83    59.84    59.32  
   512x384       60.00  
   512x288       60.00    59.92  
   480x270       59.63    59.82  
   400x300       60.32    56.34  
   432x243       59.92    59.57  
   320x240       60.05  
   360x202       59.51    59.13  
   320x180       59.84    59.32  
VGA-1 disconnected (normal left inverted right x axis y axis)
DP-1 disconnected (normal left inverted right x axis y axis)
HDMI-1 connected primary 1920x1080+0+0 (normal left inverted right x axis y axis) 527mm x 296mm
   1920x1080     60.00*+  60.00    50.00    59.94  
   1920x1080i    60.00    60.00    50.00    59.94  
   1600x1200     60.00  
   1280x1024     75.02    60.02  
   1152x864      75.00  
   1280x720      60.00    60.00    50.00    59.94  
   1024x768      75.03    60.00  
   800x600       75.00    60.32  
   720x576       50.00    50.00  
   720x576i      50.00    50.00  
   720x480       60.00    60.00    59.94    59.94    59.94  
   720x480i      60.00    60.00    59.94    59.94  
   640x480       75.00    60.00    59.94    59.94  
   720x400       70.08  

然后,当我运行时,xrandr --listproviders我得到以下输出:

Providers: number : 5
Provider 0: id: 0xe9 cap: 0xf, Source Output, Sink Output, Source Offload, Sink Offload crtcs: 2 outputs: 4 associated providers: 0 name:modesetting
Provider 1: id: 0xc3 cap: 0x2, Sink Output crtcs: 1 outputs: 1 associated providers: 0 name:modesetting
Provider 2: id: 0xa1 cap: 0x2, Sink Output crtcs: 1 outputs: 1 associated providers: 0 name:modesetting
Provider 3: id: 0x7f cap: 0x2, Sink Output crtcs: 1 outputs: 1 associated providers: 0 name:modesetting
Provider 4: id: 0x41 cap: 0x2, Sink Output crtcs: 1 outputs: 1 associated providers: 0 name:modesetting

最后,当我运行时,lsusb我得到以下输出:

Bus 002 Device 003: ID 17e9:4301 DisplayLink 
Bus 002 Device 002: ID 0bda:0401 Realtek Semiconductor Corp. 
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 006: ID 05c8:036e Cheng Uei Precision Industry Co., Ltd (Foxlink) Webcam
Bus 001 Device 005: ID 0a5c:216c Broadcom Corp. BCM43142A0 Bluetooth Device
Bus 001 Device 003: ID 045e:0752 Microsoft Corp. Wired Keyboard 400
Bus 001 Device 004: ID 046d:c52b Logitech, Inc. Unifying Receiver
Bus 001 Device 002: ID 0bda:5401 Realtek Semiconductor Corp. RTL 8153 USB 3.0 hub with gigabit ethernet
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

运行lspci我得到这个输出:

00:00.0 Host bridge: Intel Corporation Atom Processor Z36xxx/Z37xxx Series SoC Transaction Register (rev 0e)
00:02.0 VGA compatible controller: Intel Corporation Atom Processor Z36xxx/Z37xxx Series Graphics & Display (rev 0e)
00:13.0 SATA controller: Intel Corporation Atom Processor E3800 Series SATA AHCI Controller (rev 0e)
00:14.0 USB controller: Intel Corporation Atom Processor Z36xxx/Z37xxx, Celeron N2000 Series USB xHCI (rev 0e)
00:17.0 SD Host controller: Intel Corporation Atom Processor E3800 Series eMMC 4.5 Controller (rev 0e)
00:1a.0 Encryption controller: Intel Corporation Atom Processor Z36xxx/Z37xxx Series Trusted Execution Engine (rev 0e)
00:1b.0 Audio device: Intel Corporation Atom Processor Z36xxx/Z37xxx Series High Definition Audio Controller (rev 0e)
00:1c.0 PCI bridge: Intel Corporation Atom Processor E3800 Series PCI Express Root Port 1 (rev 0e)
00:1c.1 PCI bridge: Intel Corporation Atom Processor E3800 Series PCI Express Root Port 2 (rev 0e)
00:1c.2 PCI bridge: Intel Corporation Atom Processor E3800 Series PCI Express Root Port 3 (rev 0e)
00:1f.0 ISA bridge: Intel Corporation Atom Processor Z36xxx/Z37xxx Series Power Control Unit (rev 0e)
00:1f.3 SMBus: Intel Corporation Atom Processor E3800 Series SMBus Controller (rev 0e)
01:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5229 PCI Express Card Reader (rev 01)
02:00.0 Network controller: Broadcom Limited BCM43142 802.11b/g/n (rev 01)
03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101/2/6E PCI Express Fast/Gigabit Ethernet controller (rev 07)

我现在真的没有主意了。 DisplayLink 适配器确实显示,但不显示显示器。我正在尝试对其进行配置,以便拥有更好的工作流程,但什么也没有发生。如果您需要我未提供的任何其他信息,请告诉我,并感谢所有关注我的问题的人。

相关内容