☰

无法连接到 wifi：sta recv deauth 原因代码(15)

tag-icon • tag-icon debian wifi dmesg nmcli
无法连接到 wifi：sta recv deauth 原因代码(15)

我有一个无线 USB 适配器 ZyXel NDW6605，我正尝试在 Debian 10 上使用它。

它使用 Realtek RTL8812AU 芯片组，所以我从这里安装了驱动程序https://github.com/lwfinger/rtl8812au和frimware-realtek包装。

之后我可以在 ifconfig 输出中看到 wlan 接口：

    wlp10s0f3u2: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500
            ether ba:ec:a3:d9:e6:25  txqueuelen 1000  (Ethernet)
            RX packets 11  bytes 1705 (1.6 KiB)
            RX errors 0  dropped 61  overruns 0  frame 0
            TX packets 0  bytes 0 (0.0 B)
            TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0
    
    wlxb8eca3d9e625: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500
            ether b8:ec:a3:d9:e6:25  txqueuelen 1000  (Ethernet)
            RX packets 0  bytes 0 (0.0 B)
            RX errors 0  dropped 61  overruns 0  frame 0
            TX packets 0  bytes 0 (0.0 B)
            TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

以及可用 WiFi 网络的列表nmcli dev wifi list

问题是，每当我尝试连接到网络时，nmcli dev wifi connect "xxx" password "yyy"它都会不断询问我的密码并且不接受它。

这是我的输出dmesg：

[    5.766781] IPv6: ADDRCONF(NETDEV_CHANGE): enp4s0: link becomes ready
[   31.696023] RTL8812: FirmwareDownload8812: wowland_mode:0 wowlan_wake_reason:0
[   64.694789] RTL8812: FirmwareDownload8812: wowland_mode:0 wowlan_wake_reason:0
[   85.414295] RTL8812: FirmwareDownload8812: wowland_mode:0 wowlan_wake_reason:0
[   91.483427] RTL8812: set ssid [xxx] fw_state=0x00000008
[   91.565989] RTL8812: start auth
[   91.570139] RTL8812: auth success, start assoc
[   91.574308] RTL8812: assoc success
[   91.577071] UpdateHalRAMask8812A => mac_id:0, networkType:0x0b, mask:0x0fffffff
                 ==> rssi_level:0, rate_bitmap:0x0f8ff015
[   91.658694] UpdateHalRAMask8812A => mac_id:0, networkType:0x0b, mask:0x0fffffff
                 ==> rssi_level:1, rate_bitmap:0x0f8f0000
[   99.502134] RTL8812: sta recv deauth reason code(15) sta:18:d6:c7:80:c5:3a
[  101.957678] RTL8812: FirmwareDownload8812: wowland_mode:0 wowlan_wake_reason:0
[  108.028308] RTL8812: set ssid [mim] fw_state=0x00000008
[  108.155110] RTL8812: start auth
[  108.158452] RTL8812: auth success, start assoc
[  108.163228] RTL8812: assoc success
[  108.166068] UpdateHalRAMask8812A => mac_id:0, networkType:0x0b, mask:0x0fffffff
                 ==> rssi_level:0, rate_bitmap:0x0f8ff015
[  110.063816] UpdateHalRAMask8812A => mac_id:0, networkType:0x0b, mask:0x0fffffff
                 ==> rssi_level:1, rate_bitmap:0x0f8f0000
[  136.740938] IPv6: ADDRCONF(NETDEV_UP): wlp10s0f3u2: link is not ready
[  137.112065] RTL8812: FirmwareDownload8812: wowland_mode:0 wowlan_wake_reason:0
[  160.702950] RTL8812: FirmwareDownload8812: wowland_mode:0 wowlan_wake_reason:0
[  199.719092] RTL8812: FirmwareDownload8812: wowland_mode:0 wowlan_wake_reason:0
[  223.701597] RTL8812: FirmwareDownload8812: wowland_mode:0 wowlan_wake_reason:0
[  242.698232] RTL8812: FirmwareDownload8812: wowland_mode:0 wowlan_wake_reason:0
[  286.723999] RTL8812: FirmwareDownload8812: wowland_mode:0 wowlan_wake_reason:0
[  295.688256] RTL8812: FirmwareDownload8812: wowland_mode:0 wowlan_wake_reason:0

它表明身份验证成功，然后添加sta recv deauth reason code(15).

谁能帮我解决这个问题？谢谢

答案1

已找到替代驱动程序https://github.com/aircrack-ng/rtl8812au。这个确实有效

相关内容