文件系统在三星硬盘上变为只读

文件系统在三星硬盘上变为只读

我的 btrfs 文件系统有问题,它可以正常启动,但在使用过程中运行某些程序时,它突然在终端中出现此错误。

I/O error brfs unable to open /dev/sda5 read only file system

有了这个,我将无法安装或重新启动我的电脑

我做了什么: sudo btrfs check /dev/sda5

Opening filesystem to check...
WARNING: filesystem mounted, continuing because of --force
Checking filesystem on /dev/sdb5
UUID: 0cbf5d8d-2c36-437d-b7e5-984f60ed315a
[1/7] checking root items
[2/7] checking extents
[3/7] checking free space tree
[4/7] checking fs roots
parent transid verify failed on 18143887360 wanted 67089 found 67230
parent transid verify failed on 18143887360 wanted 67089 found 67230
parent transid verify failed on 18143887360 wanted 67089 found 67230
Ignoring transid failure
parent transid verify failed on 18143887360 wanted 67089 found 67230
Ignoring transid failure
parent transid verify failed on 18143887360 wanted 67089 found 67230
Ignoring transid failure
root 4357 inode 3926866 errors 400, nbytes wrong
root 4357 inode 3926867 errors 2001, no inode item, link count wrong
    unresolved ref dir 303 index 34213 namelen 9 name libltdl.a filetype 1 errors 4, no inode ref
root 4357 inode 3926868 errors 2001, no inode item, link count wrong
    unresolved ref dir 257165 index 310 namelen 7 name ltdl.m4 filetype 1 errors 4, no inode ref

root 4357 inode 3927085 errors 2001, no inode item, link count wrong
    unresolved ref dir 303 index 34275 namelen 13 name libGeoIP.so.1 filetype 7 errors 4, no inode ref
root 4357 inode 3927087 errors 2001, no inode item, link count wrong
    unresolved ref dir 31885 index 4433 namelen 12 name libgstges.so filetype 1 errors 4, no inode ref
root 4357 inode 3927088 errors 2001, no inode item, link count wrong
.. snip ...


ERROR: errors found in fs roots
found 63096352768 bytes used, error(s) found
total csum bytes: 57926864
total tree bytes: 3777855488
total fs tree bytes: 3570597888
total extent tree bytes: 134873088
btree space waste bytes: 801139744
file data blocks allocated: 229023404032
 referenced 215020417024

文件系统表:


UUID=0cbf5d8d-2c36-437d-b7e5-984f60ed315a /               btrfs   defaults,subvol=@ 0       0
# /.snapshots was on /dev/sda5 during installation
UUID=0cbf5d8d-2c36-437d-b7e5-984f60ed315a /.snapshots     btrfs   defaults,[email protected] 0       0
# /boot/efi was on /dev/sda1 during installation
UUID=57C6-8B0C  /boot/efi       vfat    umask=0077      0       1
# /home was on /dev/sda9 during installation
UUID=a26d3dd4-ced3-48eb-b61a-ccf5e9fe4106 /home           btrfs   defaults,subvol=@home 0       0
# /root was on /dev/sda5 during installation
UUID=0cbf5d8d-2c36-437d-b7e5-984f60ed315a /root           btrfs   defaults,subvol=@root 0       0
# /srv was on /dev/sda5 during installation
UUID=0cbf5d8d-2c36-437d-b7e5-984f60ed315a /srv            btrfs   defaults,subvol=@srv 0       0
# /tmp was on /dev/sda8 during installation
UUID=8c9cc344-d720-4127-b34e-ad40c111e025 /tmp            btrfs   defaults,subvol=@tmp 0       0
# /usr/local was on /dev/sda5 during installation
UUID=0cbf5d8d-2c36-437d-b7e5-984f60ed315a /usr/local      btrfs   defaults,subvol=@usr@local 0       0
# /var was on /dev/sda6 during installation
UUID=22f95418-090d-43a6-9399-354da3df8436 /var            btrfs   defaults,subvol=@var 0       0
# swap was on /dev/sda7 during installation
UUID=48f727b6-65a1-4a7b-9642-fb45fdd3dfd4 none            swap    sw              0       0
# /var/lib/gdm3 was on /dev/sda5 during installation
UUID=0cbf5d8d-2c36-437d-b7e5-984f60ed315a /var/lib/gdm3   btrfs   defaults,subvol=@var@lib@gdm3 0       0

# /var/lib/AccountsService was on /dev/sda5 during installation
UUID=0cbf5d8d-2c36-437d-b7e5-984f60ed315a /var/lib/AccountsService   btrfs   defaults,subvol=@var@lib@AccountsService 0       0

我还运行了 smartctl -x /dev/sea ,除了气流温度之外,输出一切正常。

我能够得到 dmesg 输出

dmesg 输出dmesg 输出

我的驱动器上的 smartctl 输出也是如此智能控制输出

这个问题确实与此处发布的问题相似:在此输入链接描述只是我的驱动器是 HDD 类型。

相关内容