☰

fdisk 没有显示我的硬盘驱动器格式正确（但确实如此）

tag-icon • tag-icon partition hard-disk lvm fdisk
fdisk 没有显示我的硬盘驱动器格式正确（但确实如此）

我有 3 个 1TB 驱动器，我已将它们设置为使用 LVM。这是输出pvdisplay：

  --- Physical volume ---
  PV Name               /dev/sda1
  VG Name               vgpool
  PV Size               931.51 GiB / not usable 728.00 KiB
  Allocatable           yes (but full)
  PE Size               4.00 MiB
  Total PE              238467
  Free PE               0
  Allocated PE          238467
  PV UUID               22ZgJ3-ep7X-flT6-KD1u-fWr1-Q8u9-2V28Ad

  --- Physical volume ---
  PV Name               /dev/sdc1
  VG Name               vgpool
  PV Size               931.51 GiB / not usable 728.00 KiB
  Allocatable           yes (but full)
  PE Size               4.00 MiB
  Total PE              238467
  Free PE               0
  Allocated PE          238467
  PV UUID               3b7vE1-gXPo-Moxm-5F46-vOPb-UpyF-mjo7ad

  --- Physical volume ---
  PV Name               /dev/sdb1
  VG Name               vgpool
  PV Size               931.51 GiB / not usable 728.00 KiB
  Allocatable           yes 
  PE Size               4.00 MiB
  Total PE              238467
  Free PE               774
  Allocated PE          237693
  PV UUID               dFWNtb-WbyA-HSVz-urls-G0Y9-x2W0-jwsoTq

一切看起来都不错吧？现在，我运行sudo fdisk -l：

Disk /dev/sda: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000

Disk /dev/sda doesn't contain a valid partition table

Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes
81 heads, 63 sectors/track, 382818 cylinders, total 1953525168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x2e962a62

   Device Boot      Start         End      Blocks   Id  System
/dev/sdb1            2048  1953525167   976761560   8e  Linux LVM

Disk /dev/sdc: 1000.2 GB, 1000204886016 bytes
81 heads, 63 sectors/track, 382818 cylinders, total 1953525168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0xe95df8a7

   Device Boot      Start         End      Blocks   Id  System
/dev/sdc1            2048  1953525167   976761560   8e  Linux LVM

Disk /dev/mapper/vgpool-lvstuff: 2997.4 GB, 2997362884608 bytes
255 heads, 63 sectors/track, 364408 cylinders, total 5854224384 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000

Disk /dev/mapper/vgpool-lvstuff doesn't contain a valid partition table

我担心的是，尽管我将每个驱动器正确格式化为 LVM ( )，但fdisk仍显示sda没有有效分区。8e这是我第一次使用 LVM，所以我做错了什么吗？

lshal:

  block.device = '/dev/sda'  (string)
  block.is_volume = false  (bool)
  block.major = 8  (0x8)  (int)
  block.minor = 0  (0x0)  (int)
  block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_WDC_WD10EARS_00Y5B1_WD_WCAV5C337141'  (string)
  info.capabilities = {'storage', 'block'} (string list)
  info.category = 'storage'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_3b22_scsi_host_scsi_device_lun0'  (string)
  info.product = 'WDC WD10EARS-00Y'  (string)
  info.udi = '/org/freedesktop/Hal/devices/storage_serial_WDC_WD10EARS_00Y5B1_WD_WCAV5C337141'  (string)
  info.vendor = 'ATA'  (string)
  linux.hotplug_type = 3  (0x3)  (int)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda'  (string)
  storage.automount_enabled_hint = true  (bool)
  storage.bus = 'pci'  (string)
  storage.drive_type = 'disk'  (string)
  storage.firmware_version = '80.00A08'  (string)
  storage.hotpluggable = false  (bool)
  storage.lun = 0  (0x0)  (int)
  storage.media_check_enabled = false  (bool)
  storage.model = 'WDC WD10EARS-00Y'  (string)
  storage.no_partitions_hint = false  (bool)
  storage.originating_device = '/org/freedesktop/Hal/devices/computer'  (string)
  storage.removable = false  (bool)
  storage.removable.media_available = true  (bool)
  storage.removable.media_size = 1000204886016  (0xe8e0db6000)  (uint64)
  storage.requires_eject = false  (bool)
  storage.serial = 'WDC_WD10EARS-00Y5B1_WD-WCAV5C337141'  (string)
  storage.size = 1000204886016  (0xe8e0db6000)  (uint64)
  storage.vendor = 'ATA'  (string)

答案1

看起来分区表/dev/sda被破坏了。你没有提到你做了什么来摧毁它，所以很难确切地说你将如何重建它。

  • 您可以尝试使用fdisk重新创建sda1分区。

    假设三个磁盘的磁盘分区相同，您可以使用与其他两个驱动器上相同的参数重新创建sda1分区。fdisk /dev/sda1如果正确，这应该会使体积再次可见。 （之后您可能需要重新启动。）

  • 如果失败，您可以尝试使用 TestDisk 重新创建sda1分区。

    这将扫描驱动器并尝试查找指示磁盘上的内容和位置的元数据，但它可能会给出误报。你在这里有点孤身一人。

相关内容