☰

Openbsd 上的网络摄像头

tag-icon • tag-icon openbsd camera
Openbsd 上的网络摄像头 
# dmesg
...
uaudio0 at uhub1 port 2 configuration 1 interface 1 "vendor 0x093a product 0x2622" rev 1.10/1.00 addr 2
uaudio0: audio rev 1.00, 2 mixer controls
audio1 at uaudio0
ugen0 at uhub1 port 2 configuration 1 "vendor 0x093a product 0x2622" rev 1.10/1.00 addr 2
#
# 
# usbdevs -v 
Controller /dev/usb0:
addr 1: high speed, self powered, config 1, EHCI root hub(0x0000), Intel(0x8086), rev 1.00
 port 1 powered
 port 2 powered
 port 3 powered
 port 4 powered
 port 5 addr 2: high speed, power 498 mA, config 1, UB6225(0x1606), ENE(0x0951), rev 1.00, iSerialNumber 146030377350
 port 6 powered
 port 7 powered
 port 8 powered
Controller /dev/usb1:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), Intel(0x8086), rev 1.00
 port 1 powered
 port 2 addr 2: full speed, power 100 mA, config 1, product 0x2622(0x2622), vendor 0x093a(0x093a), rev 1.00
Controller /dev/usb2:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), Intel(0x8086), rev 1.00
 port 1 powered
 port 2 powered
Controller /dev/usb3:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), Intel(0x8086), rev 1.00
 port 1 powered
 port 2 powered
Controller /dev/usb4:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), Intel(0x8086), rev 1.00
 port 1 powered
 port 2 powered
#
# 
# fswebcam               
--- Opening /dev/video0...
Trying source module v4l2...
Error opening device: /dev/video0
open: Device not configured
Unable to find a source module that can read /dev/video0.
#
#

我缺少什么？如何配置网络摄像头，以便我们可以在 OpenBSD 5.1 上使用 fswebcam 从中导出图像？网络摄像头是eye312。

答案1

不幸的是，您的网络摄像头不兼容 UVC，因此 OpenBSD 中的 uvideo 驱动程序不支持您的网络摄像头。您需要从 Linux 移植 pac7302 驱动程序才能使用此网络摄像头。

相关内容