%% %%
%% Class ``PhD Thesis PSnPDF'' %%
%% %%
%% A PhD thesis LaTeX template for Cambridge University Engineering Department%%
%% %%
%% Version: v1.4.2 %%
%% Authors: Krishna Kumar %%
%% Date: 2013/11/16 (inception) %%
%% License: MIT License (c) 2013 Krishna Kumar %%
%% GitHub Repo: https://github.com/kks32/phd-thesis-template/ %%
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% ************************** Class Identification ******************************
\newcommand\fileversion{1.4.2}
\newcommand\filedate{2014/10/08}
\NeedsTeXFormat{LaTeX2e}
\ProvidesClass{PhDThesisPSnPDF}[\filedate\space A PhD thesis class file
by Krishna Kumar (v\fileversion)]
\typeout{https://github.com/kks32/phd-thesis-template/}
% ******************************************************************************
% **************************** Class Definition ********************************
% ******************************************************************************
% *********************** Define a Print/Online Version ************************
\newif\if@print\@printfalse
\DeclareOption{print}{\@printtrue}
% ****************************** Draft Option **********************************
\newif\ifsetDraft\setDraftfalse
\newif\ifsetDraftClassic\setDraftClassicfalse
% ****************************** Define index **********************************
\newif\ifPHD@index\PHD@indexfalse
\DeclareOption{index}{\PHD@indextrue}
% ******************************* Font Option **********************************
\newif\ifsetFont\setFontfalse % Font is not set
\newif\ifPHD@times\PHD@timesfalse % Times with Math Support
\DeclareOption{times}{
\ifsetFont
\ClassWarning{PhDThesisPSnPDF}{Font selection conflict: A font package was
aleady specified. Please check the document class options in case you
have defined two fonts.}
\else
\PHD@timestrue
\setFonttrue
\fi
}
\newif\ifPHD@fourier\PHD@fourierfalse % Fourier with Math Support
\DeclareOption{fourier}{
\ifsetFont
\ClassWarning{PhDThesisPSnPDF}{Font selection conflict: A font package was
aleady specified. Please check the document class options in case you
have defined two fonts.}
\else
\PHD@fouriertrue
\setFonttrue
\fi
}
\newif\ifsetCustomFont\setCustomFontfalse % Custom Font with Math Support
\DeclareOption{customfont}{
\ifsetFont
\ClassWarning{PhDThesisPSnPDF}{Font selection conflict: A font package was
aleady specified. Please check the document class options in case you
have defined two fonts.}
\else
\setCustomFonttrue
\setFonttrue
\fi
}
% ******************************* Bibliography *********************************
\newif\ifsetBib\setBibfalse % Custom Bibliography = true/false
\newif\ifsetBiBLaTeX\setBiBLaTeXfalse % BiBLaTeX = True / False
\newif\ifPHD@biblatex\PHD@biblatexfalse % BiBLaTeX
\DeclareOption{biblatex}{
\ifsetBib
\ClassWarning{PhDThesisPSnPDF}{Bibliography selection conflict: A
bibliography style aleady specified. Please check the document class
options in case you have defined two bibliography styles.}
\else
\PHD@biblatextrue
\fi
}
\newif\ifPHD@authoryear\PHD@authoryearfalse % Author-Year citation
\DeclareOption{authoryear}{
\ifsetBib
\ClassWarning{PhDThesisPSnPDF}{Bibliography selection conflict: A
bibliography style aleady specified. Please check the document class
options in case you have defined two bibliography styles.}
\else
\PHD@authoryeartrue
\setBibtrue
\fi
}
\newif\ifPHD@numbered\PHD@numberedfalse % Numbered citiation
\DeclareOption{numbered}{
\ifsetBib
\ClassWarning{PhDThesisPSnPDF}{Bibliography selection conflict: A
bibliography style aleady specified. Please check the document class
options in case you have defined two bibliography styles.}
\else
\PHD@numberedtrue
\setBibtrue
\fi
}
\newif\ifuseCustomBib\useCustomBibfalse % Custom Bibliography
\DeclareOption{custombib}{
\ifsetBib
\ClassWarning{PhDThesisPSnPDF}{Bibliography selection conflict: A
bibliography style aleady specified. Please check the document class
options in case you have defined two bibliography styles.}
\else
\ifPHD@biblatex
\ClassWarning{PhDThesisPSnPDF}{Bibliography selection conflict: A
bibliography style aleady specified. Please check the document class
options in case you have defined two bibliography styles.}
\else
\useCustomBibtrue
\setBibtrue
\fi
\fi
}
% ************************* Header / Footer Styling ****************************
\newif\ifPHD@textJustify\PHD@textJustifytrue % Set Justification true
\DeclareOption{flushleft}{\PHD@textJustifyfalse}
% ************************* Header / Footer Styling ****************************
\newif\ifPHD@pageStyleI\PHD@pageStyleIfalse % Set Page StyleI
\DeclareOption{PageStyleI}{\PHD@pageStyleItrue}
\newif\ifPHD@pageStyleII\PHD@pageStyleIIfalse % Set Page StyleII
\DeclareOption{PageStyleII}{\PHD@pageStyleIItrue}
% ***************************** Custom Margins ********************************
\newif\ifsetCustomMargin\setCustomMarginfalse % Set Custom Margin
\newif\ifsetMargin\setMarginfalse % Set Custom Margin
\DeclareOption{custommargin}{\setCustomMargintrue}
% **************************** Separate Abstract ******************************
\newif \ifdefineAbstract\defineAbstractfalse %To enable Separate abstract
\newif\ifPHD@abstract\PHD@abstractfalse % Enable Separate Abstract
\DeclareOption{abstract}{
\PHD@abstracttrue
\ClassWarning{PhDThesisPSnPDF}{You have chosen an option that generates only
the Title page and an abstract with PhD title and author name, if this was
intentional, ignore this warning. Congratulations on submitting your thesis!
If not, please remove the option `abstract' from the document class and
recompile. Good luck with your writing!}
\PassOptionsToClass{oneside}{book}
}
% ****************** Chapter Mode - To print only selected chapters ************
\newif \ifdefineChapter\defineChapterfalse %To enable Separate abstract
\newif\ifPHD@chapter\PHD@chapterfalse % Enable Separate Abstract
\DeclareOption{chapter}{
\PHD@chaptertrue
\ClassWarning{PhDThesisPSnPDF}{You have chosen an option that generates only
selected chapters with references, if this was intentional, ignore this
warning. If not, please remove the option `chapter' from the document class
and recompile. Good luck with your writing!}
}
\ProcessOptions\relax%
% *************************** Pre-defined Options ******************************
% Font Size
\newcommand\PHD@ptsize{12pt} %Set Default Size as 12
\DeclareOption{10pt}{
\ClassWarning{PhDThesisPSnPDF}{The Cambridge University PhD thesis guidelines
recommend using a minimum font size of 11pt (12pt is preferred) and 10pt for
footnotes.}
\renewcommand\PHD@ptsize{10pt}
}
\DeclareOption{11pt}{\renewcommand\PHD@ptsize{11pt}}%
\DeclareOption{12pt}{\renewcommand\PHD@ptsize{12pt}}%
\PassOptionsToClass{\PHD@ptsize}{book}%
\message{PhDThesisPSnPDF: Font size is set as \PHD@ptsize}
% Page Size
\newcommand\PHD@papersize{a4paper} % Set Default as a4paper
\DeclareOption{a4paper}{\renewcommand\PHD@papersize{a4paper}}
\DeclareOption{a5paper}{\renewcommand\PHD@papersize{a5paper}}
\DeclareOption{letterpaper}{
\ClassWarning{PhDThesisPSnPDF}{The Cambridge University Engineering Deparment
PhD thesis guidelines recommend using A4 or A5paper}
\renewcommand\PHD@papersize{letterpaper}
}
\PassOptionsToClass{\PHD@papersize}{book}%
% Column layout
\DeclareOption{oneside}{\PassOptionsToClass{\CurrentOption}{book}}%
\DeclareOption{twoside}{\PassOptionsToClass{\CurrentOption}{book}}%
% Draft Mode
\DeclareOption{draftclassic}{\PassOptionsToClass{draft}{book}
\setDraftClassictrue
\ClassWarning{PhDThesisPSnPDF}{Draft is ON. Don't forget to turn it
off in your final version. This is the classic version of draft.
Use `draft' for enhanced mode, which adds watermark with timestamp,
line numbering, and version number.}}%
\DeclareOption{draft}{\PassOptionsToClass{\CurrentOption}{book}
\setDrafttrue
\ClassWarning{PhDThesisPSnPDF}{Draft is ON. Don't forget to turn it
off in your final version. This enhanced `draft' mode adds watermark
with timestamp, line numbering, and version number. Use `draftclassic'
if you prefer the \cite{} lassic draft mode. To tweak options see
`preamble.tex'}}%
% Deprecated option - use draft instead
\DeclareOption{draftmode}{
\ClassError{PhDThesisPSnPDF}{This option is deprecated. Use `draft'
instead this option replaces `draftmode'. To use the classic version
of draft use `draftclassic`}
\stop}%
% Line Numbers
\newif\ifPHD@lineno\PHD@linenotrue
\DeclareOption{lineno}{\PHD@linenotrue}
\DeclareOption{nolineno}{\PHD@linenofalse}
% Generates Warning for unknown options
\DeclareOption*{
\ClassWarning{PhDThesisPSnPDF}{Unknown or non-standard option
'\CurrentOption'. I'll see if I can load it from the book class. If you get a
warning unused global option(s): `\CurrentOption` then the option is not
supported!}
\PassOptionsToClass{\CurrentOption}{book}
}
% Determine whether to run pdftex or dvips
\ProcessOptions\relax%
\newif\ifsetDVI\setDVIfalse
\ifx\pdfoutput\undefined
% we are not running PDFLaTeX
\setDVItrue
\LoadClass[dvips,fleqn,openright]{book}%
\else % we are running PDFLaTeX
\ifnum \pdfoutput>0
%PDF-Output
\setDVIfalse
\LoadClass[pdftex,fleqn,openright]{book}%
\else
%DVI-output
\setDVItrue
\LoadClass[fleqn,openright]{book}%
\fi
\fi
% ******************************************************************************
% ******************************** Packages ************************************
% ******************************************************************************
% ************************** Layout and Formatting *****************************
\renewcommand\pdfshellescape{1}
\RequirePackage{lscape} % Supports Landscape Layout
\RequirePackage{setspace} % Define line spacing in paragraph
\RequirePackage{calc} % To calculate vertical spacing
% ************************* Conditional Statements *****************************
\RequirePackage{ifthen} % conditional statements
\RequirePackage{ifpdf} % Check for pdfLaTeX
% *********************** Table of Contents & Appendices ***********************
% add Bibliography, List of figures and tables to contents
\RequirePackage[nottoc]{tocbibind}
% Add appendices
\RequirePackage[title,titletoc]{appendix}
\renewcommand{\contentsname}{Table of contents}
\renewcommand{\listfigurename}{List of figures}
\renewcommand{\listtablename}{List of tables}
% Hides Contents appearing from TOC, but adds it to bookmarks
\let\temptableofcontents\tableofcontents
\renewcommand{\tableofcontents}{
\cleardoublepage
\pdfbookmark[0]{\contentsname}{Contents}
\temptableofcontents
}
% *************************** Graphics and Figures *****************************
\RequirePackage[usenames, dvipsnames]{color}
\ifpdf
% Convert eps figures to pdf
\RequirePackage{epstopdf}
\RequirePackage[pdftex]{graphicx}
\DeclareGraphicsExtensions{.png, .jpg, .pdf}
\pdfcompresslevel=9
\graphicspath{{Figs/Raster/}{Figs/}}
\else
\RequirePackage{graphicx}
\DeclareGraphicsExtensions{.eps, .ps}
\graphicspath{{Figs/Vector/}{Figs/}}
\fi
% ******************************* Time Stamp ***********************************
% Compute the timestamp based on an idea of
% Tim Piessens \texttt{<[email protected]>}.
\RequirePackage{datetime}
\newcount\PHD@hour \newcount\PHD@minute
\PHD@hour=\time
\divide \PHD@hour by 60
\PHD@minute=\time
\count@=\PHD@hour
\multiply \count@ by -60
\advance \PHD@minute by \count@
\newcommand{\PHD@daytime}{%
\today\space--\space%
\ifnum\PHD@hour=0 00\else\ifnum\PHD@hour<10 0\fi%
\number\PHD@hour\fi:\ifnum\PHD@minute<10 0\fi\number\PHD@minute
}
% ******************************* Draft Mode ***********************************
% Initializing Draft Text
\newcommand\SetDraftText[1]{}
% Initializing Draft Version
\newcommand\SetDraftVersion[1]{}
% Initializing Draft Content
\newcommand\SetDraftWMPosition[1]{}
% Initializing Draft Gray Scale
\newcommand\SetDraftGrayScale[1]{}
% Classic Draft Mode
\ifsetDraftClassic
% Disable figures in `draftmode'\
\setkeys{Gin}{draft=true}
\fi
% If Draft Mode is active
\ifsetDraft
% Disable figures in `draftmode'\
\setkeys{Gin}{draft=false}
% Line numbering (can be switched off)
\ifPHD@lineno
\RequirePackage[switch,pagewise,mathlines]{lineno}
\renewcommand{\frontmatter}{\nolinenumbers}
\renewcommand{\mainmatter}{\linenumbers}
\renewcommand{\backmatter}{\linenumbers}
% Fix display lineno issue in mathmode
\newcommand*\patchAmsMathEnvironmentForLineno[1]{%
\expandafter\let\csname old#1\expandafter\endcsname\csname #1\endcsname
\expandafter\let\csname oldend#1\expandafter\endcsname\csname end#1\endcsname
\renewenvironment{#1}%
{\linenomath\csname old#1\endcsname}%
{\csname oldend#1\endcsname\endlinenomath}%
}%
\newcommand*\patchBothAmsMathEnvironmentsForLineno[1]{%
\patchAmsMathEnvironmentForLineno{#1}%
\patchAmsMathEnvironmentForLineno{#1*}%
}%
\AtBeginDocument{%
\patchBothAmsMathEnvironmentsForLineno{equation}%
\patchBothAmsMathEnvironmentsForLineno{align}%
\patchBothAmsMathEnvironmentsForLineno{flalign}%
\patchBothAmsMathEnvironmentsForLineno{alignat}%
\patchBothAmsMathEnvironmentsForLineno{gather}%
\patchBothAmsMathEnvironmentsForLineno{multline}%
}
\fi % End \ifPDH@lineno
% Creates a Watermark Draft at the specified location.
% The settings can be tweaked in the preamble
% Draft text
\newcommand\drafttext{Draft}
\renewcommand\SetDraftText[1]{%
\renewcommand\drafttext{#1}}
% Draft Version
\newcommand\draftVersion{v1.0}
\renewcommand\SetDraftVersion[1]{%
\renewcommand\draftVersion{#1}}
% Draft Gray Scale
\newcommand\draftGrayScale{0.75}
\renewcommand\SetDraftGrayScale[1]{%
\renewcommand\draftGrayScale{#1}}
% Draft Content
\newcommand\DraftContent{%
\hspace*{\fill}
\Large
\textcolor[gray]{\draftGrayScale}{%
{\drafttext}\space-\space{\draftVersion}\hspace{\stretch{1}}{\PHD@daytime}
\hspace*{\fill}}}
% Adding watermark in draft mode with time stamp
\RequirePackage{everypage}
\RequirePackage[absolute]{textpos}
% Default values for draft watermark
\newcommand\draftposition{top}
\newcommand\draftnodeanchor{1in+\voffset-\topmargin}
\AddEverypageHook{%
\begin{textblock*}{\paperwidth}[0.,2.5](0\paperwidth,\draftnodeanchor)
\DraftContent
\end{textblock*}
}
% Conditional evaluation to position the draft water mark (top / bottom)
\renewcommand\SetDraftWMPosition[1]{%
\renewcommand\draftposition{#1}
\ifthenelse{\equal{\draftposition}{bottom}}
{\renewcommand\draftnodeanchor{\paperheight-\voffset}} %Bottom
{\ifthenelse{\equal{\draftposition}{top}}
{\renewcommand\draftnodeanchor{1in+\voffset-\topmargin}} %Top
{\ClassWarning{PDThesisPSnPDF}{Unrecognised draft position
using default value of top}
\renewcommand\draftnodeanchor{1in+\voffset-\topmargin}}} %Top
\AddEverypageHook{%
\begin{textblock*}{\paperwidth}[0.,2.5](0\paperwidth,\draftnodeanchor)
\DraftContent
\end{textblock*}
}
}
% If NOT Draft Mode
\else
\renewcommand\SetDraftText[1]{\ClassWarning{PhDThesisPSnPDF}{DraftMode is
inactive, to use SetDraftText include `draftmode' in the document
class options.}}
% Draft Version
\renewcommand\SetDraftVersion[1]{\ClassWarning{PhDThesisPSnPDF}{DraftMode is
inactive, to use SetDraftVersion include `draftmode' in the document
class options.}}
% Draft Content
\renewcommand\SetDraftWMPosition[1]{\ClassWarning{PhDThesisPSnPDF}{DraftMode
is inactive, to use SetDraftWMPosition include `draftmode' in the document
class options.}}
\renewcommand\SetDraftGrayScale[1]{\ClassWarning{PhDThesisPSnPDF}{DraftMode is
inactive, to use SetDraftWMPosition include `draftmode' in the document
class options.}}
\fi
% ******************************* Bibliography *********************************
\ifPHD@authoryear
\ifPHD@biblatex
\RequirePackage[backend=biber, style=authoryear, citestyle=alphabetic,
sorting=nty, natbib=true]{biblatex}
\setBiBLaTeXtrue
\else
\RequirePackage[round, sort, numbers, authoryear]{natbib} %author year
\fi
\else
\ifPHD@numbered
\ifPHD@biblatex
\RequirePackage[backend=biber, style=numeric-comp,
citestyle=numeric, sorting=none, natbib=true]{biblatex}
\setBiBLaTeXtrue
\else
\RequirePackage[numbers,sort&compress]{natbib} % numbered citation
\fi
\else
\ifuseCustomBib
\AtBeginDocument{
\@ifpackageloaded{natbib}{}{
\@ifpackageloaded{biblatex}{}{
\ClassWarning{PhDThesisPSnPDF}{%
You chose custom bibliography, but no corresponding package
(biblatex/natbib) has been loaded. Please load the
appropriate bibliography package in the preamble.}
}
}
}
\else % set default to numbered
\ifPHD@biblatex
\RequirePackage[backend=biber, style=numeric-comp,
citestyle=numeric, sorting=none, natbib=true]{biblatex}
\setBiBLaTeXfalse
\else
\RequirePackage[numbers,sort&compress]{natbib}
\fi % default
\setBibfalse
\fi % custombib
\fi % numbered
\fi % author year
\ifsetBib
\else
\ClassWarning{PhDThesisPSnPDF}{No bibliography style was specified.
Default numbered style is used. If you would like to use a
different style, use `authoryear' or `numbered' in the options in
documentclass or use `custombib` and define the natbib package or
biblatex package with required style in the Preamble.tex file}
\fi
% *********************** To copy ligatures and Fonts **************************
\RequirePackage{textcomp}
% Font Selection
\ifPHD@times
\RequirePackage{mathptmx} % times roman, including math (where possible)
\setFonttrue
\message{PhDThesisPSnPDF: Using Times Roman font}
\else
\ifPHD@fourier
\RequirePackage{fourier} % Fourier
\setFonttrue
\message{PhDThesisPSnPDF: Using Fourier font}
\else
\ifsetCustomFont
\setFonttrue
\message{PhDThesisPSnPDF: Using custom font}
\else
\setFontfalse
\message{PhDThesisPSnPDF: No font is set}
\fi % custom font
\fi % Fourier font
\fi % Times font
% If Font is not set throw a warning.
\ifsetFont
\else
\ClassWarning{PhDThesisPSnPDF}{Using default font Latin Modern. If you
would like to use other pre-defined fonts use `times' (The Cambridge
University PhD thesis guidelines recommend using Times font) or `fourier'
or load a custom font in the preamble.tex file by specifying `customfont'
in the class options}
\RequirePackage{lmodern}
\fi
\RequirePackage[utf8]{inputenc}
\RequirePackage[T1]{fontenc}
\input{glyphtounicode}
\pdfglyphtounicode{f_f}{FB00}
\pdfglyphtounicode{f_i}{FB01}
\pdfglyphtounicode{f_l}{FB02}
\pdfglyphtounicode{f_f_i}{FB03}
\pdfglyphtounicode{f_f_l}{FB04}
\pdfgentounicode=1
% Don't break enumeration (etc.) across pages in an ugly manner
\clubpenalty=10000
\widowpenalty=10000
% If building with PDFLaTeX, use microtype spacing adjustments
\RequirePackage[final]{microtype}
%******************************* Print / Online ********************************
% Defines a print / online version to define page-layout and hyperrefering
% Moved below other usepackage definitions to fix PDFLaTeX footnote warning
% Based on the suggestion by John Plaice
\ifsetDVI
\special{papersize=\the\paperwidth,\the\paperheight}
\RequirePackage[dvips,unicode=true]{hyperref}
\else
\RequirePackage[unicode=true]{hyperref}
\pdfpagewidth=\the\paperwidth
\pdfpageheight=\the\paperheight
\fi
\if@print
% For Print version
\hypersetup{
final=true,
plainpages=false,
pdfstartview=FitV,
pdftoolbar=true,
pdfmenubar=true,
bookmarksopen=true,
bookmarksnumbered=true,
breaklinks=true,
linktocpage,
colorlinks=true,
linkcolor=black,
urlcolor=black,
citecolor=black,
anchorcolor=black
}
\ifsetCustomMargin
% Margin to be define in preamble using geometry package
\else
\ifsetDVI
% Odd and Even side Margin for binding and set viewmode for PDF
\RequirePackage[dvips,paper=\PHD@papersize,hmarginratio=1:1,
vmarginratio=1:1,scale=0.75,bindingoffset=5mm]{geometry}
\else
\RequirePackage[pdftex,paper=\PHD@papersize,hmarginratio=1:1,
vmarginratio=1:1,scale=0.75,bindingoffset=5mm]{geometry}
\fi
\fi
\if@twoside
\hypersetup{pdfpagelayout=TwoPageRight}
\else
\hypersetup{pdfpagelayout=OneColumn}
\fi
\else
% For PDF Online version
\hypersetup{
final=true,
plainpages=false,
pdfstartview=FitV,
pdftoolbar=true,
pdfmenubar=true,
bookmarksopen=true,
bookmarksnumbered=true,
breaklinks=true,
linktocpage,
colorlinks=true,
linkcolor=blue,
urlcolor=blue,
citecolor=blue,
anchorcolor=green
}
\ifsetCustomMargin
% Margin to be define in preamble using geometry package
\else
% No Margin staggering on Odd and Even side
\ifsetDVI
\RequirePackage[dvips,paper=\PHD@papersize,hmarginratio=1:1,
vmarginratio=1:1,scale=0.75]{geometry}
\else
\RequirePackage[pdftex,paper=\PHD@papersize,hmarginratio=1:1,
vmarginratio=1:1,scale=0.75]{geometry}
\fi
\fi
\hypersetup{pdfpagelayout=OneColumn}
\fi
% Backward compatibility - setMargin is now replaced with customMargin
\ifsetCustomMargin
\setMarginfalse
\else
\setMargintrue
\fi
% ************************ URL Package and Definition **************************
\RequirePackage{url}
% Redefining urlstyle to use smaller fontsize in References with URLs
\newcommand{\url@leostyle}{%
\@ifundefined{selectfont}{\renewcommand{\UrlFont}{\sffamily}}
{\renewcommand{\UrlFont}{\normalsize}}}
\urlstyle{leo}
% option to split urls over multiple lines for latex >> DVIPS >> PDF option
% PDFLaTeX does it automatically.
\ifsetDVI
\RequirePackage{breakurl} % to split the url over multiple lines
\fi
% ******************************************************************************
% **************************** Pre-defined Settings ****************************
% ******************************************************************************
% *************************** Setting PDF Meta-Data ****************************
\ifpdf
\AtBeginDocument{
\hypersetup{
pdftitle = {\@title},
pdfauthor = {\@author},
pdfsubject={\@subject},
pdfkeywords={\@keywords}
}
}
\fi
% ******************************** Line Spacing ********************************
% Set spacing as 1.5 line spacing for the PhD Thesis
% In practice, fortunately, nobody knows really what “one-and-a-half spaced
% type” means exactly (in terms of millimetres baseline distance). The following
% LaTeX setting has routinely been considered perfectly acceptable:
\renewcommand\baselinestretch{1.2}
% ******************************** Justification *******************************
% Left aligned as per University identity guidelines
\ifPHD@textJustify
\message{PhDThesisPSnPDF: The University identity guidelines recommend using
left aligned text. Please use `flushleft' in the documentclass option, if you
wish to left align your text}
\else
\AtBeginDocument{
\raggedright
}
\fi
% ************************** TOC and Hide Sections *****************************
\newcommand{\nocontentsline}[3]{}
\newcommand{\tochide}[2]{
\bgroup\let
\addcontentsline=\nocontentsline#1{#2}
\egroup}
% Removes pagenumber appearing from TOC
\addtocontents{toc}{\protect\thispagestyle{empty}}
% ***************************** Header Formatting ******************************
% Custom Header with Chapter Number, Page Number and Section Numbering
\RequirePackage{fancyhdr} % Define custom header
% Set Fancy Header Command is defined to Load FancyHdr after Geometry is defined
\newcommand{\setFancyHdr}{
\pagestyle{fancy}
\ifPHD@pageStyleI
% Style 1: Sets Page Number at the Top and Chapter/Section Name on LE/RO
\renewcommand{\chaptermark}[1]{\markboth{##1}{}}
\renewcommand{\sectionmark}[1]{\markright{\thesection\ ##1\ }}
\fancyhf{}
\fancyhead[RO]{\nouppercase \rightmark\hspace{0.25em} |
\hspace{0.25em} \bfseries{\thepage}}
\fancyhead[LE]{ {\bfseries\thepage} \hspace{0.25em} |
\hspace{0.25em} \nouppercase \leftmark}
\else
\ifPHD@pageStyleII
% Style 2: Sets Page Number at the Bottom with Chapter/Section Name on LO/RE
\renewcommand{\chaptermark}[1]{\markboth{##1}{}}
\renewcommand{\sectionmark}[1]{\markright{\thesection\ ##1}}
\fancyhf{}
\fancyhead[RO]{\bfseries\nouppercase \rightmark}
\fancyhead[LE]{\bfseries \nouppercase \leftmark}
\fancyfoot[C]{\thepage}
\else
% Default Style: Sets Page Number at the Top (LE/RO) with Chapter/Section Name
% on LO/RE and an empty footer
\renewcommand{\chaptermark}[1]{\markboth {##1}{}}
\renewcommand{\sectionmark}[1]{\markright{\thesection\ ##1}}
\fancyhf{}
\fancyhead[LO]{\nouppercase \rightmark}
\fancyhead[LE,RO]{\bfseries\thepage}
\fancyhead[RE]{\nouppercase \leftmark}
\fi
\fi
}
\setlength{\headheight}{14.5pt}
%\renewcommand{\headrulewidth}{0.5pt}
%\renewcommand{\footrulewidth}{0pt}
\fancypagestyle{plain}{
\fancyhead{}
\renewcommand{\headrulewidth}{0pt}
}
% If Margin has been set (default margin print/online version)
\ifsetCustomMargin
\AtBeginDocument{
\@ifpackageloaded{geometry}{}{\ClassWarning{PhDThesisPSnPDF}{%
Custom margin is chosen, but geometry package is not loaded. Please load the
`geometry' package in the preamble.}}}
\else
\setFancyHdr % Apply fancy header settings otherwise apply it in preamble
\fi
% **************** Clear Header Style on the Last Empty Odd pages **************
\renewcommand{\cleardoublepage}{\clearpage\if@twoside \ifodd\c@page\else%
\hbox{}%
\thispagestyle{empty} % Empty header styles
\newpage%
\if@twocolumn\hbox{}\newpage\fi\fi\fi}
% ******************************** Roman Pages *********************************
% The romanpages environment set the page numbering to lowercase roman one
% for the contents and figures lists. It also resets
% page-numbering for the remainder of the dissertation (arabic, starting at 1).
\newenvironment{romanpages}{
\setcounter{page}{1}
\renewcommand{\thepage}{\roman{page}}}
{\newpage\renewcommand{\thepage}{\arabic{page}}}
% ******************************* Appendices **********************************
% Appending the appendix name to the letter in TOC
% Especially when backmatter is enabled
%\renewcommand\backmatter{
% \def\chaptermark##1{\markboth{%
% \ifnum \c@secnumdepth > \m@ne \@chapapp\ \thechapter: \fi ##1}{%
% \ifnum \c@secnumdepth > \m@ne \@chapapp\ \thechapter: \fi ##1}}%
% \def\sectionmark##1{\relax}}
}
答案1
老式边距设置：
\documentclass{article}
\setlength{\paperheight}{11in}
\setlength{\paperwidth}{8.5in}
\pdfpageheight=\paperheight% pdflates only
\pdfpagewidth=\paperwidth% pdflates only
\setlength{\topmargin}{\dimexpr -\headheight-\headsep}
\setlength{\textheight}{9in}% 11 - 1 - 1
\setlength{\oddsidemargin}{.5in}
\setlength{\evensidemargin}{.5in}
\setlength{\textwidth}{5.75in}% 8.5 - 1.5 - 1.25
\begin{document}
\noindent\rule{\textwidth}{\textheight}
\end{document}
原点实际上位于左上角下方 1 英寸处和右侧 1 英寸处。需要注意的是，默认 PDF 页边距略有偏差，因此需要 \pdfpageheight 等。打印时不要使用“自动旋转和居中”。