默认情况下，在信件类别中，标题和信件正文之间似乎有很大的空白/间隙。我该如何减少两者之间的空白？请参阅下面链接中的图片以及代码。
% Cover letter using letter.sty
\documentclass[letterbox, 10pt]{letter} % Uses 10pt
\usepackage[pdftex, hidelinks]{hyperref}
%Use \documentstyle[newcent]{letter} for New Century Schoolbook postscript font
% the following commands control the margins:
\topmargin=-1in % Make letterhead start about 1 inch from top of page
\textheight=8in % text height can be bigger for a longer letter
\oddsidemargin=0pt % leftmargin is 1 inch
\textwidth=6.5in % textwidth of 6.5in leaves 1 inch for right margin
% Color definitions
\usepackage[usenames,dvipsnames]{xcolor}
\definecolor{date}{HTML}{666666} %666666
\definecolor{primary}{HTML}{2b2b2b} %2b2b2b , changes color of section name, and everything under it
\definecolor{headings}{HTML}{6A6A6A} %6A6A6A, changes color of phone and address
\definecolor{subheadings}{HTML}{333333} %333333
% Set main fonts
\usepackage{fontspec}
\setmainfont[Color=primary, Path = fonts/lato/,BoldItalicFont=Lato-RegIta,BoldFont=Lato-Bol,ItalicFont=Lato-RegIta]{Lato-Reg}
\setsansfont[Scale=MatchLowercase,Mapping=tex-text, Path = fonts/raleway /]{Raleway-ExtraLight}
% Name command, for customizing name at top
\newcommand{\namesection}[3]{
\centering{
\fontsize{20pt}{24pt}
\fontspec[Path = fonts/lato/]{Lato-Bol}\selectfont #1 %Try Lato-Hai for lighter contrast, First Name
\fontspec[Path = fonts/lato/]{Lato-Lig}\selectfont #2 %Last name
} \\[5pt]
\centering{
\color{headings}
\fontspec[Path = fonts/raleway/]{Raleway-Medium}\fontsize{9pt}{11pt} \selectfont #3}
\vspace{-5pt} %Distance between Name heading and education. This font is just for email, phone, address in title
}
\begin{document}
\signature{Susan R. Bumpershoot} % name for signature
\longindentation=0pt % needed to get closing flush left
\let\raggedleft\raggedright % needed to get date flush left
\begin{letter}{Ms. Terri Roberts \\
Senior Staff Recruiter \\
XYZ Corporation \\
Rt. 56 \\
Anytown, New Jersey 05867}
\begin{center}
\namesection{xxxx}{x. xxxxx}{\href{mailto:xxxxx}{\color{blue} \underline{[email protected]}} | xxx-xxx-xxxx | Chicago, IL xxxxx}
\end{center}
\vfill % forces letterhead to top of page
\opening{Dear Ms. Roberts:}
\noindent PARAGRAPH ONE: State reason for letter, name the position or type
of work you are applying for and identify source from which you
learned of the opening. (i.e. Career Development Center,
newspaper, employment service, personal contact).
\noindent PARAGRAPH TWO: Indicate why you are interested in the position,
the company, its products, services - above all, stress what you
can do for the employer. If you are a recent graduate, explain
how your academic background makes you a qualified candidate for
the position. If you have practical work experience, point out
specific achievements or unique qualifications. Try not to repeat
the same information the reader will find in the resume. Refer
the reader to the enclosed resume or application which summarizes
your qualifications, training, and experiences. The purpose of
this section is to strengthen your resume by providing details
which bring your experiences to life.
\noindent PARAGRAPH THREE: Request a personal interview and indicate your
flexibility as to the time and place. Repeat your phone number in
the letter and offer assistance to help in a speedy response. For
example, state that you will be in the city where the company is
located on a certain date and would like to set up an interview.
Or, state that you will call on a certain date to set up an
interview. End the letter by thanking the employer for taking
time to consider your credentials.
\closing{Sincerely yours,}
\encl{} % Enclosures
\end{letter}
\end{document}
答案1
在那时添加的空间迫使\vfill字母主体移到页面的底部，我还添加了一些其他的内联注释。
\documentclass[letterbox, 10pt]{letter} % Uses 10pt
\usepackage[
% no pdftex
, hidelinks]{hyperref}
%Use \documentstyle[newcent]{letter} for New Century Schoolbook postscript font
% the following commands control the margins:
\topmargin=-1in % Make letterhead start about 1 inch from top of page
\textheight=8in % text height can be bigger for a longer letter
\oddsidemargin=0pt % leftmargin is 1 inch
\textwidth=6.5in % textwidth of 6.5in leaves 1 inch for right margin
% Color definitions
\usepackage[usenames,dvipsnames]{xcolor}
\definecolor{date}{HTML}{666666} %666666
\definecolor{primary}{HTML}{2b2b2b} %2b2b2b , changes color of section name, and everything under it
\definecolor{headings}{HTML}{6A6A6A} %6A6A6A, changes color of phone and address
\definecolor{subheadings}{HTML}{333333} %333333
% Set main fonts
\usepackage{fontspec}
% I don't have this font
%\setmainfont[Color=primary, Path = fonts/lato/,BoldItalicFont=Lato-RegIta,BoldFont=Lato-Bol,ItalicFont=Lato-RegIta]{Lato-Reg}
%\setsansfont[Scale=MatchLowercase,Mapping=tex-text, Path = fonts/raleway /]{Raleway-ExtraLight}
% Name command, for customizing name at top
\newcommand{\namesection}[3]{
% no \centering{
\fontsize{20pt}{24pt}
% I don't have this \fontspec[Path = fonts/lato/]{Lato-Bol}
\selectfont
#1 %Try Lato-Hai for lighter contrast, First Name
% I don't have this \fontspec[Path = fonts/lato/]{Lato-Lig}
\selectfont
#2 %Last name
%no }
% no line to end \\[5pt]
%no \centering{
\color{headings}
% I don't have this font \fontspec[Path = fonts/raleway/]{Raleway-Medium}\fontsize{9pt}{11pt}
\selectfont #3
%}
% leave blank line before vspace
\vspace{-5pt} %Distance between Name heading and education. This font is just for email, phone, address in title
}
\begin{document}
\signature{Susan R. Bumpershoot} % name for signature
\longindentation=0pt % needed to get closing flush left
\let\raggedleft\raggedright % needed to get date flush left
\begin{letter}{Ms. Terri Roberts \\
Senior Staff Recruiter \\
XYZ Corporation \\
Rt. 56 \\
Anytown, New Jersey 05867}
\begin{center}
\namesection{xxxx}{x. xxxxx}{\href{mailto:xxxxx}{\color{blue} \underline{[email protected]}} | xxx-xxx-xxxx | Chicago, IL xxxxx}
\end{center}
% no!!! \vfill % forces letterhead to top of page
\opening{Dear Ms. Roberts:}
\noindent PARAGRAPH ONE: State reason for letter, name the position or type
of work you are applying for and identify source from which you
learned of the opening. (i.e. Career Development Center,
newspaper, employment service, personal contact).
\noindent PARAGRAPH TWO: Indicate why you are interested in the position,
the company, its products, services - above all, stress what you
can do for the employer. If you are a recent graduate, explain
how your academic background makes you a qualified candidate for
the position. If you have practical work experience, point out
specific achievements or unique qualifications. Try not to repeat
the same information the reader will find in the resume. Refer
the reader to the enclosed resume or application which summarizes
your qualifications, training, and experiences. The purpose of
this section is to strengthen your resume by providing details
which bring your experiences to life.
\noindent PARAGRAPH THREE: Request a personal interview and indicate your
flexibility as to the time and place. Repeat your phone number in
the letter and offer assistance to help in a speedy response. For
example, state that you will be in the city where the company is
located on a certain date and would like to set up an interview.
Or, state that you will call on a certain date to set up an
interview. End the letter by thanking the employer for taking
time to consider your credentials.
\closing{Sincerely yours,}
\encl{} % Enclosures
\end{letter}
\end{document}