☰

我需要一个乳胶上的思维导图，其中有孩子，又有孩子

tag-icon • tag-icon tikz-pgf latex3 mindmaps
我需要一个乳胶上的思维导图，其中有孩子，又有孩子

我需要一个像这样的思维导图：

  1. “A” 生出 2 个孩子“A1”和“A2”，其中“A”与“A1”和“A2”分别呈 20 度和 70 度角，且“A”距离“A1”为 3cm，“A”到“A2”的距离也是 3cm。

  2. “A2”没有生孩子。

  3. “A1”生了三个孩子（“B1”、“B2”、“B3”）。“B1”与“A1”成 10 度角，距离“A1”3 厘米。“B2”与“A1”成 45 度角，距离“A1”3 厘米。“B3”与“A1”成 80 度角，距离“A1”3 厘米

  4. “B1”不会生育孩子

  5. “B3”同样不会生育孩子

  6. “B2”生了 3 个孩子（“C1”、“C2”、“C3”）

  7. “C1”、“C2”、“C3”没有生孩子。

    我已经尝试过这个代码

    \documentclass[handout,14pt]{beamer}


\usepackage{pgfpages}
\pgfpagesuselayout{2 on 1}[a4paper]

\usetheme{Madrid}
\useoutertheme{miniframes} % Alternatively: miniframes, infolines, split
\useinnertheme{circles}
\makeatletter
\def\beamer@writeslidentry{\clearpage\beamer@notesactions}
\makeatother

\definecolor{navyblue}{rgb}{0.36, 0.57, 0.9} % Navy Blue (primary)
\definecolor{gold(metalic)}{rgb}{0.53, 0.0, 0.69} % Gold(metalic) (secondary)
\definecolor{guppiegreen}{rgb}{0.0, 1.0, 0.0}% (tertiary)

\definecolor{black}{rgb}{0.17, 0.09, 0.03}% (tertiary1)

\definecolor{white}{rgb}{1.0, 1.0, 1.0}% (tertiary2)

\setbeamercolor{palette primary}{bg=navyblue,fg=black}
\setbeamercolor{palette secondary}{bg=navyblue,fg=black}
\setbeamercolor{palette tertiary}{bg=gold(metalic),fg=white}
\setbeamercolor{palette quaternary}{bg=navyblue (metalic),fg=white}
\setbeamercolor{structure}{fg=navyblue} % itemize, enumerate, etc
\setbeamercolor{section in toc}{fg=navyblue} % TOC sections

\usepackage{textpos}
\usepackage[utf8]{inputenc}
\usepackage[english]{babel}
\usepackage{listings}
\usepackage{amssymb} 
\usepackage{amsmath}
\usepackage{array}
\usepackage{tikz}
\usetikzlibrary{shapes.geometric,arrows}
\usepackage{graphicx}


%%%%%%%%%%%%%%                  %%%%%%%%%%%%%%

\newif\ifsidebartheme
\sidebarthemetrue

\newdimen\contentheight
\newdimen\contentwidth
\newdimen\contentleft
\newdimen\contentbottom
\makeatletter
\newcommand*{\calculatespace}{%
\contentheight=\paperheight%
\ifx\beamer@frametitle\@empty%
\setbox\@tempboxa=\box\voidb@x%
\else%
\setbox\@tempboxa=\vbox{%
\vbox{}%
{\parskip0pt\usebeamertemplate***{frametitle}}%
}%
\ifsidebartheme%
\advance\contentheight by-1em%
\fi%
\fi%
\advance\contentheight by-\ht\@tempboxa%
\advance\contentheight by-\dp\@tempboxa%
\advance\contentheight by-\beamer@frametopskip%
\ifbeamer@plainframe%
\contentbottom=0pt%
\else%
\advance\contentheight by-\headheight%
\advance\contentheight by\headdp%
\advance\contentheight by-\footheight%
\advance\contentheight by4pt%
\contentbottom=\footheight%
\advance\contentbottom by-4pt%
\fi%
\contentwidth=\paperwidth%
\ifbeamer@plainframe%
    \contentleft=0pt%
\else%
\advance\contentwidth by-\beamer@rightsidebar%
\advance\contentwidth by-\beamer@leftsidebar\relax%
\contentleft=\beamer@leftsidebar%
\fi%
}
\makeatother

\setbeamertemplate{caption}[numbered]%put number on figure and table

%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
\usepackage{caption}
\usepackage{subcaption}
\captionsetup{compatibility=false}
\makeatletter
\let\orig@subref\subref

\renewcommand{\subref}{%
\@ifstar{\subref@starred}{\subref@unstarred}%
}

\newcommand{\subref@starred}[1]{%
\orig@subref*{#1}%
}

\newcommand{\subref@unstarred}[1]{%
\hyperlink{#1}{\orig@subref*{#1}}%
}
\makeatother
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% for fancy box
\usepackage{fancybox}
\usepackage{ragged2e}
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%for spotlight highliting
\usepackage{spot} 
\RequirePackage{tikz}
\usetikzlibrary{shapes}
\usetikzlibrary{fadings}
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%

\usetikzlibrary{mindmap,trees,shadows}
    %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%

\setbeamercolor{emph}{fg=blue}
\renewcommand<>{\emph}[1]{%
{\usebeamercolor[fg]{emph}\only#2{\itshape}#1}%
}

%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%

%for arc and angles
\usetikzlibrary{calc, angles}
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
\RequirePackage{luatex85}
\usepackage{luamplib}

\usepackage[round]{natbib} 



\title{Working Title: }
\institute[LATEXD]{A  SEMINAR PRESENTED IN DEPARTMENT OF latex}
\date{\today}

\usepackage{mathptmx}% http://ctan.org/pkg/mathptmx% is TIME NEW ROMANS
\usepackage{tgtermes} % times font
%\usepackage{wordlike}% Emulate MS Word

\usepackage{changepage,mathtools,amsthm,tikz,blindtext}
\usepackage{inputenc,float,caption,subcaption,enumitem}
\usepackage[font=large,labelfont=bf,font=bf,labelsep=space]{caption}
\usepackage[font=small,labelfont=bf,font=bf,labelsep=space]{subcaption}



\usepackage{datetime}

\newdateformat{monthyeardate}{%
\monthname[\THEMONTH], \THEYEAR}
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%for arc and angles
\usetikzlibrary{calc, angles}
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
\RequirePackage{luatex85}
\usepackage{luamplib}
\usetikzlibrary{mindmap}
    \begin{document}
    \begin{frame}[fragile, shrink=72]
    \frametitle{~}
    \begin{block}{Time Series Broad Classification}
        \begin{figure}%[H]
            \centering
            \begin{tikzpicture}
        [decoration={start radius=1cm, end radius=.5cm,amplitude=3mm,angle=30}]

        % Define experience colors
        \colorlet{afcolor}{blue!50}
        \colorlet{mdcolor}{red!75}
        \colorlet{nmndcolor}{orange!80}
        \colorlet{nmescolor}{teal!70!green}
        \colorlet{citscolor}{violet!75}

        \begin{scope}[mindmap,
        every node/.style={concept, circular drop shadow, minimum size=0pt,execute at begin node=\hskip0pt, font=\bfseries},
        root concept/.append style={
            concept color=black, fill=white, line width=1.5ex, text=black, font=\huge\scshape\bfseries,},
        level 1 concept/.append style={font=\bfseries},
        text=white,
        partner/.style={concept color=blue!80!black},
        air force/.style={concept color=afcolor},
        metadata/.style={concept color=mdcolor},
        nmnd/.style={concept color=nmndcolor},
        nmes/.style={concept color=nmescolor},
        cits/.style={concept color=citscolor},
        grow cyclic,
        level 1/.append style={level distance=8.2cm,sibling angle=-60},
        level 2/.append style={level distance=6cm,sibling angle=60}],
        level 3/.append style={level distance=6cm,sibling angle=60}]
        \node [root concept] (team) {A }[rotate=20.5] % root


        child [partner] { node {A1}
        }
        child [partner] { node {A2}
            child [air force] { node {\small B3} }
            child [nmnd] { node {\small B2} }
            child [nmes] { node {\small \textbf{B1}} }
        };
        \end{scope}

        \begin{scope}[xshift=-4.5cm, yshift=-12.5cm,every node/.style={align=left,text=black}]
        \matrix[row sep=0pt,column sep=1mm, align=left, nodes={align=left, anchor=west}] {
            \fill [afcolor] (0,.25ex) circle (1ex); & \node{A};\\
            \fill [mdcolor] (0,.25ex) circle (1ex); & \node{A};\\
            \fill [nmndcolor] (0,.25ex) circle (1ex); & \node{A Environment};\\
            \fill [nmescolor] (0,.25ex) circle (1ex); & \node{A};\\
            \fill [citscolor] (0,.25ex) circle (1ex); & \node{A};\\
        };
        \end{scope}
        \end{tikzpicture}
        \caption{Broad Classification of ALPHABET}
        \label{fig3.1a}
    \end{figure}
\end{block}
\end{frame}
\end{document}

    ** 它运行良好，但我想将“C1”、“C2”、“C3”分别添加为“B2”的子项。

答案1

像这样吗？

\documentclass[handout,14pt]{beamer}


\usepackage{pgfpages}
\pgfpagesuselayout{2 on 1}[a4paper]

\usetheme{Madrid}
\useoutertheme{miniframes} % Alternatively: miniframes, infolines, split
\useinnertheme{circles}
\makeatletter
\def\beamer@writeslidentry{\clearpage\beamer@notesactions}
\makeatother

\definecolor{navyblue}{rgb}{0.36, 0.57, 0.9} % Navy Blue (primary)
\definecolor{gold(metalic)}{rgb}{0.53, 0.0, 0.69} % Gold(metalic) (secondary)
\definecolor{guppiegreen}{rgb}{0.0, 1.0, 0.0}% (tertiary)

\definecolor{black}{rgb}{0.17, 0.09, 0.03}% (tertiary1)

\definecolor{white}{rgb}{1.0, 1.0, 1.0}% (tertiary2)

\setbeamercolor{palette primary}{bg=navyblue,fg=black}
\setbeamercolor{palette secondary}{bg=navyblue,fg=black}
\setbeamercolor{palette tertiary}{bg=gold(metalic),fg=white}
\setbeamercolor{palette quaternary}{bg=navyblue (metalic),fg=white}
\setbeamercolor{structure}{fg=navyblue} % itemize, enumerate, etc
\setbeamercolor{section in toc}{fg=navyblue} % TOC sections

\usepackage{textpos}
\usepackage[utf8]{inputenc}
\usepackage[english]{babel}
\usepackage{listings}
\usepackage{amssymb} 
\usepackage{amsmath}
\usepackage{array}
\usepackage{tikz}
\usetikzlibrary{shapes.geometric,arrows}
\usepackage{graphicx}


%%%%%%%%%%%%%%                  %%%%%%%%%%%%%%

\newif\ifsidebartheme
\sidebarthemetrue

\newdimen\contentheight
\newdimen\contentwidth
\newdimen\contentleft
\newdimen\contentbottom
\makeatletter
\newcommand*{\calculatespace}{%
\contentheight=\paperheight%
\ifx\beamer@frametitle\@empty%
\setbox\@tempboxa=\box\voidb@x%
\else%
\setbox\@tempboxa=\vbox{%
\vbox{}%
{\parskip0pt\usebeamertemplate***{frametitle}}%
}%
\ifsidebartheme%
\advance\contentheight by-1em%
\fi%
\fi%
\advance\contentheight by-\ht\@tempboxa%
\advance\contentheight by-\dp\@tempboxa%
\advance\contentheight by-\beamer@frametopskip%
\ifbeamer@plainframe%
\contentbottom=0pt%
\else%
\advance\contentheight by-\headheight%
\advance\contentheight by\headdp%
\advance\contentheight by-\footheight%
\advance\contentheight by4pt%
\contentbottom=\footheight%
\advance\contentbottom by-4pt%
\fi%
\contentwidth=\paperwidth%
\ifbeamer@plainframe%
    \contentleft=0pt%
\else%
\advance\contentwidth by-\beamer@rightsidebar%
\advance\contentwidth by-\beamer@leftsidebar\relax%
\contentleft=\beamer@leftsidebar%
\fi%
}
\makeatother

\setbeamertemplate{caption}[numbered]%put number on figure and table

%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
\usepackage{caption}
\usepackage{subcaption}
\captionsetup{compatibility=false}
\makeatletter
\let\orig@subref\subref

\renewcommand{\subref}{%
\@ifstar{\subref@starred}{\subref@unstarred}%
}

\newcommand{\subref@starred}[1]{%
\orig@subref*{#1}%
}

\newcommand{\subref@unstarred}[1]{%
\hyperlink{#1}{\orig@subref*{#1}}%
}
\makeatother
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% for fancy box
\usepackage{fancybox}
\usepackage{ragged2e}
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%for spotlight highliting
\usepackage{spot} 
\RequirePackage{tikz}
\usetikzlibrary{shapes}
\usetikzlibrary{fadings}
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%

\usetikzlibrary{mindmap,trees,shadows}
    %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%

\setbeamercolor{emph}{fg=blue}
\renewcommand<>{\emph}[1]{%
{\usebeamercolor[fg]{emph}\only#2{\itshape}#1}%
}

%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%

%for arc and angles
\usetikzlibrary{calc, angles}
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
\RequirePackage{luatex85}
\usepackage{luamplib}

\usepackage[round]{natbib} 



\title{Working Title: }
\institute[LATEXD]{A  SEMINAR PRESENTED IN DEPARTMENT OF latex}
\date{\today}

\usepackage{mathptmx}% http://ctan.org/pkg/mathptmx% is TIME NEW ROMANS
\usepackage{tgtermes} % times font
%\usepackage{wordlike}% Emulate MS Word

\usepackage{changepage,mathtools,amsthm,tikz,blindtext}
\usepackage{inputenc,float,caption,subcaption,enumitem}
\usepackage[font=large,labelfont=bf,font=bf,labelsep=space]{caption}
\usepackage[font=small,labelfont=bf,font=bf,labelsep=space]{subcaption}



\usepackage{datetime}

\newdateformat{monthyeardate}{%
\monthname[\THEMONTH], \THEYEAR}
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%for arc and angles
\usetikzlibrary{calc, angles}
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
\RequirePackage{luatex85}
\usepackage{luamplib}
\usetikzlibrary{mindmap}
    \begin{document}
    \begin{frame}[fragile, shrink=72]
    \frametitle{~}
    \begin{block}{Time Series Broad Classification}
        \begin{figure}%[H]
            \centering
            \begin{tikzpicture}
        [decoration={start radius=1cm, end radius=.5cm,amplitude=3mm,angle=30}]

        % Define experience colors
        \colorlet{afcolor}{blue!50}
        \colorlet{mdcolor}{red!75}
        \colorlet{nmndcolor}{orange!80}
        \colorlet{nmescolor}{teal!70!green}
        \colorlet{citscolor}{violet!75}

        \begin{scope}[mindmap,
        every node/.style={concept, circular drop shadow, minimum size=0pt,execute at begin node=\hskip0pt, font=\bfseries},
        root concept/.append style={
            concept color=black, fill=white, line width=1.5ex, text=black, font=\huge\scshape\bfseries,},
        level 1 concept/.append style={font=\bfseries},
        text=white,
        partner/.style={concept color=blue!80!black},
        air force/.style={concept color=afcolor},
        metadata/.style={concept color=mdcolor},
        nmnd/.style={concept color=nmndcolor},
        nmes/.style={concept color=nmescolor},
        cits/.style={concept color=citscolor},
        grow cyclic,
        level 1/.append style={level distance=8.2cm,sibling angle=-60},
        level 2/.append style={level distance=6cm,sibling angle=60}],
        level 3/.append style={level distance=6cm,sibling angle=60}]
        \node [root concept] (team) {A }[rotate=20.5] % root


        child [partner] { node {A1}
        }
        child [partner] { node {A2}
            child [air force] { node {\small B3} }
            child [nmnd] { node {\small B2} child {node {\footnotesize C1}} child {node {\footnotesize C2}} child {node {\footnotesize C3}}}
            child [nmes] { node {\small \textbf{B1}} }
        };
        \end{scope}

        \begin{scope}[xshift=-4.5cm, yshift=-12.5cm,every node/.style={align=left,text=black}]
        \matrix[row sep=0pt,column sep=1mm, align=left, nodes={align=left, anchor=west}] {
            \fill [afcolor] (0,.25ex) circle (1ex); & \node{A};\\
            \fill [mdcolor] (0,.25ex) circle (1ex); & \node{A};\\
            \fill [nmndcolor] (0,.25ex) circle (1ex); & \node{A Environment};\\
            \fill [nmescolor] (0,.25ex) circle (1ex); & \node{A};\\
            \fill [citscolor] (0,.25ex) circle (1ex); & \node{A};\\
        };
        \end{scope}
        \end{tikzpicture}
        \caption{Broad Classification of ALPHABET}
        \label{fig3.1a}
    \end{figure}
\end{block}
\end{frame}
\end{document}

在此处输入图片描述

附言：我刚刚添加了孩子......但不知道这是否足够，因为我的添加并没有增加您的 MWE 所需的知识......

答案2

至于你的观点：

  1. 如果想要A1有子元素，则需要将其放在 后面的花括号中A1，而不是A2。
  2. 您可以使用 明确设置增长角度grow=<angle>。
  3. 级别距离决定了子级与父级之间的距离，这些距离已在您的代码中设置，例如level 1/.append style={level distance=8.2cm,...},。您缩小了框架，我不知道为什么。无论如何，您需要调整距离以考虑缩小因素。
  4. 的子代B2可以像的子代一样设置A1。这一点在 koleygr 的回答中也得到了解决。

除此之外，我觉得你的序言有点冗长。我想知道你是否需要这一切。

\documentclass[handout,14pt]{beamer}


\usepackage{pgfpages}
\pgfpagesuselayout{2 on 1}[a4paper]

\usetheme{Madrid}
\useoutertheme{miniframes} % Alternatively: miniframes, infolines, split
\useinnertheme{circles}
\makeatletter
\def\beamer@writeslidentry{\clearpage\beamer@notesactions}
\makeatother

\definecolor{navyblue}{rgb}{0.36, 0.57, 0.9} % Navy Blue (primary)
\definecolor{gold(metalic)}{rgb}{0.53, 0.0, 0.69} % Gold(metalic) (secondary)
\definecolor{guppiegreen}{rgb}{0.0, 1.0, 0.0}% (tertiary)

\definecolor{black}{rgb}{0.17, 0.09, 0.03}% (tertiary1)

\definecolor{white}{rgb}{1.0, 1.0, 1.0}% (tertiary2)

\setbeamercolor{palette primary}{bg=navyblue,fg=black}
\setbeamercolor{palette secondary}{bg=navyblue,fg=black}
\setbeamercolor{palette tertiary}{bg=gold(metalic),fg=white}
\setbeamercolor{palette quaternary}{bg=navyblue (metalic),fg=white}
\setbeamercolor{structure}{fg=navyblue} % itemize, enumerate, etc
\setbeamercolor{section in toc}{fg=navyblue} % TOC sections

\usepackage{textpos}
\usepackage[utf8]{inputenc}
\usepackage[english]{babel}
\usepackage{listings}
\usepackage{amssymb} 
\usepackage{amsmath}
\usepackage{array}
\usepackage{tikz}
\usetikzlibrary{shapes.geometric,arrows}
\usepackage{graphicx}


%%%%%%%%%%%%%%                  %%%%%%%%%%%%%%

\newif\ifsidebartheme
\sidebarthemetrue

\newdimen\contentheight
\newdimen\contentwidth
\newdimen\contentleft
\newdimen\contentbottom
\makeatletter
\newcommand*{\calculatespace}{%
\contentheight=\paperheight%
\ifx\beamer@frametitle\@empty%
\setbox\@tempboxa=\box\voidb@x%
\else%
\setbox\@tempboxa=\vbox{%
\vbox{}%
{\parskip0pt\usebeamertemplate***{frametitle}}%
}%
\ifsidebartheme%
\advance\contentheight by-1em%
\fi%
\fi%
\advance\contentheight by-\ht\@tempboxa%
\advance\contentheight by-\dp\@tempboxa%
\advance\contentheight by-\beamer@frametopskip%
\ifbeamer@plainframe%
\contentbottom=0pt%
\else%
\advance\contentheight by-\headheight%
\advance\contentheight by\headdp%
\advance\contentheight by-\footheight%
\advance\contentheight by4pt%
\contentbottom=\footheight%
\advance\contentbottom by-4pt%
\fi%
\contentwidth=\paperwidth%
\ifbeamer@plainframe%
    \contentleft=0pt%
\else%
\advance\contentwidth by-\beamer@rightsidebar%
\advance\contentwidth by-\beamer@leftsidebar\relax%
\contentleft=\beamer@leftsidebar%
\fi%
}
\makeatother

\setbeamertemplate{caption}[numbered]%put number on figure and table

%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
\usepackage{caption}
\usepackage{subcaption}
\captionsetup{compatibility=false}
\makeatletter
\let\orig@subref\subref

\renewcommand{\subref}{%
\@ifstar{\subref@starred}{\subref@unstarred}%
}

\newcommand{\subref@starred}[1]{%
\orig@subref*{#1}%
}

\newcommand{\subref@unstarred}[1]{%
\hyperlink{#1}{\orig@subref*{#1}}%
}
\makeatother
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% for fancy box
\usepackage{fancybox}
\usepackage{ragged2e}
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%for spotlight highliting
\usepackage{spot} 
\RequirePackage{tikz}
\usetikzlibrary{shapes}
\usetikzlibrary{fadings}
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%

\usetikzlibrary{mindmap,trees,shadows}
    %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%

\setbeamercolor{emph}{fg=blue}
\renewcommand<>{\emph}[1]{%
{\usebeamercolor[fg]{emph}\only#2{\itshape}#1}%
}

%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%

%for arc and angles
\usetikzlibrary{calc, angles}
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
\RequirePackage{luatex85}
\usepackage{luamplib}

\usepackage[round]{natbib} 



\title{Working Title: }
\institute[LATEXD]{A  SEMINAR PRESENTED IN DEPARTMENT OF latex}
\date{\today}

\usepackage{mathptmx}% http://ctan.org/pkg/mathptmx% is TIME NEW ROMANS
\usepackage{tgtermes} % times font
%\usepackage{wordlike}% Emulate MS Word

\usepackage{changepage,mathtools,amsthm,tikz,blindtext}
\usepackage{inputenc,float,caption,subcaption,enumitem}
\usepackage[font=large,labelfont=bf,font=bf,labelsep=space]{caption}
\usepackage[font=small,labelfont=bf,font=bf,labelsep=space]{subcaption}



\usepackage{datetime}

\newdateformat{monthyeardate}{%
\monthname[\THEMONTH], \THEYEAR}
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%for arc and angles
\usetikzlibrary{calc, angles}
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
\RequirePackage{luatex85}
\usepackage{luamplib}
\usetikzlibrary{mindmap}
    \begin{document}
    \begin{frame}[fragile, shrink=72]
    \frametitle{~}
    \begin{block}{Time Series Broad Classification}
        \begin{figure}%[H]
            \centering
            \begin{tikzpicture}
        [decoration={start radius=1cm, end radius=.5cm,amplitude=3mm,angle=30}]

        % Define experience colors
        \colorlet{afcolor}{blue!50}
        \colorlet{mdcolor}{red!75}
        \colorlet{nmndcolor}{orange!80}
        \colorlet{nmescolor}{teal!70!green}
        \colorlet{citscolor}{violet!75}

        \begin{scope}[mindmap,
        every node/.style={concept, circular drop shadow, minimum size=0pt,execute at begin node=\hskip0pt, font=\bfseries},
        root concept/.append style={
            concept color=black, fill=white, line width=1.5ex, text=black, font=\huge\scshape\bfseries,},
        level 1 concept/.append style={font=\bfseries},
        text=white,
        partner/.style={concept color=blue!80!black},
        air force/.style={concept color=afcolor},
        metadata/.style={concept color=mdcolor},
        nmnd/.style={concept color=nmndcolor},
        nmes/.style={concept color=nmescolor},
        cits/.style={concept color=citscolor},
        grow cyclic,
        level 1/.append style={level distance=6cm},
        level 2/.append style={level distance=5cm,font=\small},
        level 3/.append style={level distance=4cm}]
        \node [root concept] (team) {A }%[%rotate=20.5] % root


        child [partner,grow=20] { node {A1}
            child [air force,grow=-40] { node {B3} }
            child [nmnd,grow=20] { node {B2} 
              child [cits,grow=-70]{ node {C1} }
              child [cits,grow=-10]{ node {C2} }
              child [cits,grow=50]{ node {C3} }
            }
            child [nmes,grow=80] { node {\textbf{B1}} }
        }
        child [partner,grow=70] { node {A2}
        };
        \end{scope}

        \begin{scope}[xshift=-4.5cm, yshift=-6cm,every node/.style={align=left,text=black}]
        \matrix[row sep=0pt,column sep=1mm, align=left, nodes={align=left, anchor=west}] {
            \fill [afcolor] (0,.25ex) circle (1ex); & \node{A};\\
            \fill [mdcolor] (0,.25ex) circle (1ex); & \node{A};\\
            \fill [nmndcolor] (0,.25ex) circle (1ex); & \node{A Environment};\\
            \fill [nmescolor] (0,.25ex) circle (1ex); & \node{A};\\
            \fill [citscolor] (0,.25ex) circle (1ex); & \node{A};\\
        };
        \end{scope}
        \end{tikzpicture}
        \caption{Broad Classification of ALPHABET}
        \label{fig3.1a}
    \end{figure}
\end{block}
\end{frame}
\end{document}

在此处输入图片描述

相关内容