我是 Linux 新手，遇到一些小问题。我跟着本指南最初，但没有收到正确的输出，并且没有显示我的 ATI Radeon HD 5000 温度或风扇速度。然后我用了本指南，并出现了相同的问题。安装时没有遇到任何问题，也没有出现错误。我认为它i2c出于某种原因无法读取。专有驱动程序已安装并根据正确运行fglrxinfo。我可以使用aticonfig命令并查看温度和风扇。有什么想法吗？
关于如何让它工作的任何想法sensors？
当我运行时sudo sensors-detect这是我的输出
# sensors-detect revision 5984 (2011-07-10 21:22:53 +0200)
# System: LENOVO IdeaPad Y560 (laptop)
# Board: Lenovo KL3
This program will help you determine which kernel modules you need
to load to use lm_sensors most effectively. It is generally safe
and recommended to accept the default answers to all questions,
unless you know what you're doing.
Some south bridges, CPUs or memory controllers contain embedded sensors.
Do you want to scan for them? This is totally safe. (YES/no): y
Silicon Integrated Systems SIS5595... No
VIA VT82C686 Integrated Sensors... No
VIA VT8231 Integrated Sensors... No
AMD K8 thermal sensors... No
AMD Family 10h thermal sensors... No
AMD Family 11h thermal sensors... No
AMD Family 12h and 14h thermal sensors... No
AMD Family 15h thermal sensors... No
AMD Family 15h power sensors... No
Intel digital thermal sensor... Success!
(driver `coretemp')
Intel AMB FB-DIMM thermal sensor... No
VIA C7 thermal sensor... No
VIA Nano thermal sensor... No
Some Super I/O chips contain embedded sensors. We have to write to
standard I/O ports to probe them. This is usually safe.
Do you want to scan for Super I/O sensors? (YES/no): y
Probing for Super-I/O at 0x2e/0x2f
Trying family `National Semiconductor/ITE'... Yes
Found unknown chip with ID 0x8502
Probing for Super-I/O at 0x4e/0x4f
Trying family `National Semiconductor/ITE'... No
Trying family `SMSC'... No
Trying family `VIA/Winbond/Nuvoton/Fintek'... No
Trying family `ITE'... No
Some hardware monitoring chips are accessible through the ISA I/O ports.
We have to write to arbitrary I/O ports to probe them. This is usually
safe though. Yes, you do have ISA I/O ports even if you do not have any
ISA slots! Do you want to scan the ISA I/O ports? (YES/no): y
Probing for `National Semiconductor LM78' at 0x290... No
Probing for `National Semiconductor LM79' at 0x290... No
Probing for `Winbond W83781D' at 0x290... No
Probing for `Winbond W83782D' at 0x290... No
Lastly, we can probe the I2C/SMBus adapters for connected hardware
monitoring devices. This is the most risky part, and while it works
reasonably well on most systems, it has been reported to cause trouble
on some systems.
Do you want to probe the I2C/SMBus adapters now? (YES/no): y
Using driver `i2c-i801' for device 0000:00:1f.3: Intel 3400/5 Series (PCH)
Now follows a summary of the probes I have just done.
Just press ENTER to continue:
Driver `coretemp':
* Chip `Intel digital thermal sensor' (confidence: 9)
To load everything that is needed, add this to /etc/modules:
#----cut here----
# Chip drivers
coretemp
#----cut here----
If you have some drivers built into your kernel, the list above will
contain too many modules. Skip the appropriate ones!
Do you want to add these lines automatically to /etc/modules? (yes/NO)我的输出sensors是：
acpitz-virtual-0
Adapter: Virtual device
temp1: +58.0°C (crit = +100.0°C)
coretemp-isa-0000
Adapter: ISA adapter
Core 0: +56.0°C (high = +84.0°C, crit = +100.0°C)
Core 1: +57.0°C (high = +84.0°C, crit = +100.0°C)
Core 2: +58.0°C (high = +84.0°C, crit = +100.0°C)
Core 3: +57.0°C (high = +84.0°C, crit = +100.0°C)
我的/etc/modules是：
# /etc/modules: kernel modules to load at boot time.
#
# This file contains the names of kernel modules that should be loaded
# at boot time, one per line. Lines beginning with "#" are ignored.
lp
rtc
# Generated by sensors-detect on Fri Nov 30 23:24:31 2012
# Chip drivers
coretemp
答案1
AFAIK，lm-sensors 无法读取 fglrx 风扇和温度，该模块仅支持通过 with 命令读取该值，aticonfig如下所示：
aticonfig --pplib-cmd“获取温度 0” aticonfig --od-get温度
答案2
你安装了 i2c-devel 或 i2c-tools 吗？如果没有，请安装其中一个（无论您的发行版存储库中可用），重新启动，然后再次尝试传感器检测。如果仍然无法正常工作，请尝试使用您的发行版附带的开源驱动程序，重新启动，然后重试。
PS：当您发布问题时，正确的形式是完整说明您计算机的硬件（而不仅仅是其中的一个组件），以及您使用的特定操作系统（Mageia？Arch？Fedora？Windows？什么？什么版本？我知道这是 Ubuntu，但是哪个版本？），您遇到的问题所使用的确切驱动程序（安装了哪个文件？您从哪里获得它？），以及到目前为止您到底尝试过什么来获取东西为你工作。