我更新了所有软件包，然后出现此错误。我在 MiKTeX 控制台中安装了 everysel 软件包，但这没有帮助。everysel 由我需要的 ragged2e 软件包调用。我需要使用 LuaLaTeX 进行编译
我删除了所有文件然后再次进行编译，但是无济于事。
梅威瑟：
\documentclass{scrreprt}
\usepackage{ragged2e}
\begin{document}
Hello World
\end{document}
日志档案：
This is LuaHBTeX, Version 1.14.0 (MiKTeX 21.8) (format=lualatex 2021.8.30) 30 AUG 2021 10:46
restricted system commands enabled.
**ragged2e.tex
(./ragged2e.tex
LaTeX2e <2021-06-01> patch level 1
Lua module: luaotfload 2021-05-21 3.18 Lua based OpenType font support
Lua module: lualibs 2021-05-20 2.74 ConTeXt Lua standard libraries.
Lua module: lualibs-extended 2021-05-20 2.74 ConTeXt Lua libraries -- extended c
ollection.
luaotfload | conf : Root cache directory is "C:/Users/Anne/AppData/Local/MiKTeX/
2.9/luatex-cache/generic/names".
luaotfload | init : Loading fontloader "fontloader-2021-05-20.lua" from kpse-res
olved path "C:/MiKTeX 2.9/tex/luatex/luaotfload/fontloader-2021-05-20.lua".
Lua-only attribute luaotfload@noligature = 1
Lua-only attribute luaotfload@syllabe = 2
luaotfload | init : Context OpenType loader version 3.116
Inserting `luaotfload.node_processor' at position 1 in `pre_linebreak_filter'.
Inserting `luaotfload.node_processor' at position 1 in `hpack_filter'.
Inserting `luaotfload.glyph_stream' at position 1 in `glyph_stream_provider'.
Inserting `luaotfload.define_font' at position 1 in `define_font'.
Lua-only attribute luaotfload_color_attribute = 3
luaotfload | conf : Root cache directory is "C:/Users/Anne/AppData/Local/MiKTeX/
2.9/luatex-cache/generic/names".
Inserting `luaotfload.harf.strip_prefix' at position 1 in `find_opentype_file'.
Inserting `luaotfload.harf.strip_prefix' at position 1 in `find_truetype_file'.
Inserting `luaotfload.harf.finalize_vlist' at position 1 in `post_linebreak_filt
er'.
Inserting `luaotfload.harf.finalize_hlist' at position 2 in `hpack_filter'.
Inserting `luaotfload.cleanup_files' at position 1 in `wrapup_run'.
Inserting `luaotfload.harf.finalize_unicode' at position 1 in `finish_pdffile'.
Inserting `luaotfload.glyphinfo' at position 1 in `glyph_info'.
Lua-only attribute luaotfload.letterspace_done = 4
Inserting `luaotfload.aux.set_sscale_dimens' at position 1 in `luaotfload.patch_
font'.
Inserting `luaotfload.aux.set_font_index' at position 2 in `luaotfload.patch_fon
t'.
Inserting `luaotfload.aux.patch_cambria_domh' at position 3 in `luaotfload.patch
_font'.
Inserting `luaotfload.aux.fixup_fontdata' at position 1 in `luaotfload.patch_fon
t_unsafe'.
Inserting `luaotfload.aux.set_capheight' at position 4 in `luaotfload.patch_font
'.
Inserting `luaotfload.aux.set_xheight' at position 5 in `luaotfload.patch_font'.
Inserting `luaotfload.rewrite_fontname' at position 6 in `luaotfload.patch_font'
. L3 programming layer <2021-08-27>
Inserting `tracingstacklevels' at position 1 in `input_level_string'.
(C:/Users/Anne/AppData/Roaming/MiKTeX/2.9/tex/latex/tex/latex/koma-script/scrre
prt.cls
Document Class: scrreprt 2021/06/03 v3.34.3603 KOMA-Script document class (repo
rt)
(C:/Users/Anne/AppData/Roaming/MiKTeX/2.9/tex/latex/tex/latex/koma-script/scrkb
ase.sty
Package: scrkbase 2021/06/03 v3.34.3603 KOMA-Script package (KOMA-Script-depend
ent basics and keyval usage)
(C:/Users/Anne/AppData/Roaming/MiKTeX/2.9/tex/latex/tex/latex/koma-script/scrba
se.sty
Package: scrbase 2021/06/03 v3.34.3603 KOMA-Script package (KOMA-Script-indepen
dent basics and keyval usage)
(C:/Users/Anne/AppData/Roaming/MiKTeX/2.9/tex/latex/tex/latex/koma-script/scrlf
ile.sty
Package: scrlfile 2021/06/03 v3.34.3603 KOMA-Script package (file load hooks)
(C:/Users/Anne/AppData/Roaming/MiKTeX/2.9/tex/latex/tex/latex/koma-script/scrlf
ile-hook.sty
Package: scrlfile-hook 2021/06/03 v3.34.3603 KOMA-Script package (using LaTeX h
ooks)
(C:/Users/Anne/AppData/Roaming/MiKTeX/2.9/tex/latex/tex/latex/koma-script/scrlo
go.sty
Package: scrlogo 2021/06/03 v3.34.3603 KOMA-Script package (logo)
))) ("C:/MiKTeX 2.9/tex/latex/graphics/keyval.sty"
Package: keyval 2014/10/28 v1.15 key=value parser (DPC)
\KV@toks@=\toks16
)
Applying: [2021/05/01] Usage of raw option list on input line 252.
Already applied: [0000/00/00] compatibility for LaTeX before 2021/05/01 on inpu
t line 339.
))
(C:/Users/Anne/AppData/Roaming/MiKTeX/2.9/tex/latex/tex/latex/koma-script/tocba
sic.sty
Package: tocbasic 2021/06/03 v3.34.3603 KOMA-Script package (handling toc-files
)
\scr@dte@tocline@numberwidth=\skip47
\scr@dte@tocline@numbox=\box50
)
Package tocbasic Info: babel extension for `toc' omitted
(tocbasic) because of missing \bbl@set@language on input line 137.
Class scrreprt Info: File `scrsize11pt.clo' used instead of
(scrreprt) file `scrsize11.clo' to setup font sizes on input line 248
6.
(C:/Users/Anne/AppData/Roaming/MiKTeX/2.9/tex/latex/tex/latex/koma-script/scrsi
ze11pt.clo
File: scrsize11pt.clo 2021/06/03 v3.34.3603 KOMA-Script font size class option
(11pt)
luaotfload | db : Font names database loaded from C:/Users/Anne/AppData/Local/Mi
KTeX/2.9/luatex-cache/generic/names/luaotfload-names.luc)
(C:/Users/Anne/AppData/Roaming/MiKTeX/2.9/tex/latex/tex/latex/koma-script/typea
rea.sty
Package: typearea 2021/06/03 v3.34.3603 KOMA-Script package (type area)
\ta@bcor=\skip48
\ta@div=\count179
\ta@hblk=\skip49
\ta@vblk=\skip50
\ta@temp=\skip51
\footheight=\skip52
Package typearea Info: These are the values describing the layout:
(typearea) DIV = 10
(typearea) BCOR = 0.0pt
(typearea) \paperwidth = 597.50793pt
(typearea) \textwidth = 418.25555pt
(typearea) DIV departure = -6%
(typearea) \evensidemargin = 17.3562pt
(typearea) \oddsidemargin = 17.3562pt
(typearea) \paperheight = 845.04694pt
(typearea) \textheight = 595.80026pt
(typearea) \topmargin = -25.16531pt
(typearea) \headheight = 17.0pt
(typearea) \headsep = 20.40001pt
(typearea) \topskip = 11.0pt
(typearea) \footskip = 47.6pt
(typearea) \baselineskip = 13.6pt
(typearea) on input line 1742.
)
\c@part=\count180
\c@chapter=\count181
\c@section=\count182
\c@subsection=\count183
\c@subsubsection=\count184
\c@paragraph=\count185
\c@subparagraph=\count186
\scr@dte@chapter@maxnumwidth=\skip53
Class scrreprt Info: using compatibility default `afterindent=bysign'
(scrreprt) for `\chapter on input line 5716.
\scr@dte@section@maxnumwidth=\skip54
Class scrreprt Info: using compatibility default `runin=bysign'
(scrreprt) for `\section on input line 5727.
Class scrreprt Info: using compatibility default `afterindent=bysign'
(scrreprt) for `\section on input line 5727.
\scr@dte@part@maxnumwidth=\skip55
Class scrreprt Info: using compatibility default `afterindent=true'
(scrreprt) for `\part on input line 5736.
\scr@dte@subsection@maxnumwidth=\skip56
Class scrreprt Info: using compatibility default `runin=bysign'
(scrreprt) for `\subsection on input line 5746.
Class scrreprt Info: using compatibility default `afterindent=bysign'
(scrreprt) for `\subsection on input line 5746.
\scr@dte@subsubsection@maxnumwidth=\skip57
Class scrreprt Info: using compatibility default `runin=bysign'
(scrreprt) for `\subsubsection on input line 5756.
Class scrreprt Info: using compatibility default `afterindent=bysign'
(scrreprt) for `\subsubsection on input line 5756.
\scr@dte@paragraph@maxnumwidth=\skip58
Class scrreprt Info: using compatibility default `runin=bysign'
(scrreprt) for `\paragraph on input line 5767.
Class scrreprt Info: using compatibility default `afterindent=bysign'
(scrreprt) for `\paragraph on input line 5767.
\scr@dte@subparagraph@maxnumwidth=\skip59
Class scrreprt Info: using compatibility default `runin=bysign'
(scrreprt) for `\subparagraph on input line 5777.
Class scrreprt Info: using compatibility default `afterindent=bysign'
(scrreprt) for `\subparagraph on input line 5777.
\abovecaptionskip=\skip60
\belowcaptionskip=\skip61
\c@pti@nb@sid@b@x=\box51
Package tocbasic Info: babel extension for `lof' omitted
(tocbasic) because of missing \bbl@set@language on input line 6957.
\scr@dte@figure@maxnumwidth=\skip62
\c@figure=\count187
Package tocbasic Info: babel extension for `lot' omitted
(tocbasic) because of missing \bbl@set@language on input line 6974.
\scr@dte@table@maxnumwidth=\skip63
\c@table=\count188
Class scrreprt Info: Redefining `\numberline' on input line 7143.
\bibindent=\dimen138
)
(C:/Users/Anne/AppData/Roaming/MiKTeX/2.9/tex/latex/ragged2e/ragged2e.sty
Package: ragged2e 2019/07/28 v2.2 ragged2e Package (MS)
(C:/Users/Anne/AppData/Roaming/MiKTeX/2.9/tex/latex/ms/everysel.sty
Package: everysel 2011/10/28 v1.2 EverySelectfont Package (MS)
)
! Class scrreprt Error: incompatible `everysel' detected .
See the scrreprt class documentation for explanation.
Type H <return> for immediate help.
...
l.146 \if@raggedtwoe@footmisc
You are using an old version of `everysel' in combination with a LaTeX
version >= 2021/06/01 and KOMA-Script >= 3.33. This combination is
not supported.
You could switch back to an older LaTeX using package `latexrelease'.
But I recommend to update `everysel'
\CenteringLeftskip=\skip64
\RaggedLeftLeftskip=\skip65
\RaggedRightLeftskip=\skip66
\CenteringRightskip=\skip67
\RaggedLeftRightskip=\skip68
\RaggedRightRightskip=\skip69
\CenteringParfillskip=\skip70
\RaggedLeftParfillskip=\skip71
\RaggedRightParfillskip=\skip72
\JustifyingParfillskip=\skip73
\CenteringParindent=\skip74
\RaggedLeftParindent=\skip75
\RaggedRightParindent=\skip76
\JustifyingParindent=\skip77
) ("C:/MiKTeX 2.9/tex/latex/l3backend/l3backend-luatex.def"
File: l3backend-luatex.def 2021-08-04 L3 backend support: PDF output (LuaTeX)
\l__color_backend_stack_int=\count189
\l__pdf_internal_box=\box52
) (./ragged2e.aux)
\openout1 = ragged2e.aux
LaTeX Font Info: Checking defaults for OML/cmm/m/it on input line 8.
LaTeX Font Info: ... okay on input line 8.
LaTeX Font Info: Checking defaults for OMS/cmsy/m/n on input line 8.
LaTeX Font Info: ... okay on input line 8.
LaTeX Font Info: Checking defaults for OT1/cmr/m/n on input line 8.
LaTeX Font Info: ... okay on input line 8.
LaTeX Font Info: Checking defaults for T1/cmr/m/n on input line 8.
LaTeX Font Info: ... okay on input line 8.
LaTeX Font Info: Checking defaults for TS1/cmr/m/n on input line 8.
LaTeX Font Info: Trying to load font information for TS1+cmr on input line 8
.
("C:/MiKTeX 2.9/tex/latex/base/ts1cmr.fd"
File: ts1cmr.fd 2019/12/16 v2.5j Standard LaTeX font definitions
)
LaTeX Font Info: ... okay on input line 8.
LaTeX Font Info: Checking defaults for TU/lmr/m/n on input line 8.
LaTeX Font Info: ... okay on input line 8.
LaTeX Font Info: Checking defaults for OMX/cmex/m/n on input line 8.
LaTeX Font Info: ... okay on input line 8.
LaTeX Font Info: Checking defaults for U/cmr/m/n on input line 8.
LaTeX Font Info: ... okay on input line 8.
Package scrbase Info: activating english \contentsname on input line 8.
Package scrbase Info: activating english \listfigurename on input line 8.
Package scrbase Info: activating english \listtablename on input line 8.
ABD: EverySelectfont initializing macros
LaTeX Warning: Command \selectfont has changed.
Check if current package is valid.
LaTeX Info: Redefining \selectfont on input line 8.
[1
{C:/Users/Anne/AppData/Local/MiKTeX/2.9/pdftex/config/pdftex.map}]
(./ragged2e.aux))
Here is how much of LuaTeX's memory you used:
3525 strings out of 478146
100000,552014 words of node,token memory allocated
496 words of node memory still in use:
3 hlist, 1 vlist, 1 rule, 2 glue, 3 kern, 1 glyph, 4 attribute, 66 glue_spec,
4 attribute_list, 1 write nodes
avail lists: 2:27,3:4,4:1,5:27,6:2,7:52,9:24,11:3
23854 multiletter control sequences out of 65536+600000
23 fonts using 2647927 bytes
108i,7n,102p,10602b,272s stack positions out of 5000i,500n,10000p,200000b,80000s
<//?/c:/miktex 2.9/fonts/opentype/public/lm/lmroman10-regular.otf>
Output written on ragged2e.pdf (1 page, 3775 bytes).
PDF statistics: 13 PDF objects out of 1000 (max. 8388607)
0 named destinations out of 1000 (max. 131072)
1 words of extra memory for PDF output out of 10000 (max. 100000000)