JD990A 上的界面非常精简。有一个带有最少命令的串行控制台和一个 Web 界面。3750 位于 2 个交换机堆栈中，我正在尝试使用 HP 配置跨堆栈链路聚合。网上的大多数信息都倾向于使用更好的 HP 交换机，该交换机没有 CLI 访问权限。
有谁知道实现这一目标需要什么？
Cisco 3750：Cisco IOS 软件、C3750E 软件 (C3750E-UNIVERSALK9NPE-M)、版本 15.0(2)SE2、发布软件 (fc1)
HP JD990A：软件版本：02.00.01
Cisco 3750 配置
!
! Last configuration change at 01:50:10 AEST Thu Jun 13 2013 by administrator
! NVRAM config last updated at 01:50:11 AEST Thu Jun 13 2013 by administrator
!
version 15.0
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
service sequence-numbers
!
hostname 1.c.s.net
!
boot-start-marker
boot-end-marker
!
!
enable secret 5 redacted
!
username administrator privilege 15 secret 5 redacted
aaa new-model
!
!
aaa authentication login default local
aaa authorization exec default local
!
!
!
!
!
!
aaa session-id common
clock timezone redacted
switch 1 provision ws-c3750x-24
switch 2 provision ws-c3750x-24
system mtu routing 1500
!
!
!
ip domain-name corp.redacted.com.au
!
stack-power stack PowerStack-1
!
!
!
crypto pki trustpoint TP-self-signed-3311124608
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-3311124608
revocation-check none
rsakeypair TP-self-signed-3311124608
!
!
crypto pki certificate chain TP-self-signed-3311124608
certificate self-signed 01
redacted
quit
cts server deadtime 0
no cts server test all enable
cts server test all idle-time 0
cts server test all deadtime 0
!
!
!
spanning-tree extend system-id
!
!
!
!
!
!
vlan internal allocation policy ascending
!
ip scp server enable
!
!
!
!
!
interface Port-channel5
switchport trunk encapsulation dot1q
switchport mode trunk
spanning-tree portfast trunk
!
interface FastEthernet0
no ip address
!
interface GigabitEthernet1/0/1
!
interface GigabitEthernet1/0/2
!
interface GigabitEthernet1/0/3
!
interface GigabitEthernet1/0/4
!
interface GigabitEthernet1/0/5
switchport trunk encapsulation dot1q
switchport mode trunk
spanning-tree portfast trunk
channel-protocol lacp
channel-group 5 mode active
!
interface GigabitEthernet1/0/6
!
interface GigabitEthernet1/0/7
!
interface GigabitEthernet1/0/8
!
interface GigabitEthernet2/0/1
!
interface GigabitEthernet2/0/2
!
interface GigabitEthernet2/0/3
!
interface GigabitEthernet2/0/4
!
interface GigabitEthernet2/0/5
switchport trunk encapsulation dot1q
switchport mode trunk
spanning-tree portfast trunk
channel-protocol lacp
channel-group 5 mode active
!
interface GigabitEthernet2/0/6
!
interface GigabitEthernet2/0/7
!
interface GigabitEthernet2/0/8
!
interface Vlan1
ip address 10.1.1.242 255.255.255.0
!
ip http server
ip http secure-server
!
!
!
!
line con 0
logging synchronous
line vty 0
exec-timeout 0 0
transport input ssh
transport output ssh
line vty 1 4
line vty 5 15
!
ntp server 10.1.1.21 prefer
end
答案1
注意：我之所以发布此内容作为答案，主要是因为评论很难阅读。我不确定您是在询问如何配置 HP 交换机，还是想要了解双方（思科和 HP）的完整详细信息。
JD990A 是 HP 1905 吧？3COM OfficeConnect 采集线？
请参阅这两个链接：
http://bizsupport2.austin.hp.com/bc/docs/support/SupportManual/c02581623/c02581623.pdf
http://bizsupport2.austin.hp.com/bc/docs/support/SupportManual/c02583125/c02583125.pdf
您应该能够通过 HP 交换机的 Web 界面在端口上配置 LACP，以与 Cisco 交换机端口上的 LACP 配置相对应。
只需确保将 HP 端聚合类型配置为 LACP 而不是静态。
答案2
通道组的模式需要在。
channel-group 5 mode on