Juniper SSG5 吞吐量突然变慢

Juniper SSG5 吞吐量突然变慢

我正在尝试找出问题可能出在我的配置中。大约一个月前,我们通过 Juniper SSG5 轻松通过我们的提供商获得 100 的上行速度和 50 的下行速度。几周前开始情况发生了变化。如果我直接插入电缆调制解调器,一切都很好,我可以获得全速。如果我插入 netscreen,它会下降到大约 20 - 25 的下行速度和 20 - 25 的上行速度。我已经更换了电缆以及 netscreen 本身。唯一剩下的事情似乎就是配置了。

unset key protection enable
set clock timezone -7
set clock dst recurring start-weekday 2 0 3 02:00 end-weekday 1 0 11 02:00
set vrouter trust-vr sharable
set vrouter "untrust-vr"
exit
set vrouter "trust-vr"
unset auto-route-export
exit
set service "AV-iPhone" protocol tcp src-port 0-65535 dst-port 80-80 
set service "AV-iPhone" + tcp src-port 0-65535 dst-port 41786-41786 
set service "AV-iPhone" timeout never
set service "DVR" protocol tcp src-port 37777-37777 dst-port 37777-37777 
set service "DVR" + tcp src-port 3000-3000 dst-port 3000-3000 
set service "DVR" timeout never
set service "Crestron-Mobile" protocol tcp src-port 0-65535 dst-port 37777-37777 timeout never 
set service "Crestron-Processor" protocol tcp src-port 0-65535 dst-port 41794-41794 
set service "Crestron-Processor2" protocol tcp src-port 0-65535 dst-port 41795-41795 
set service "Crestron-Processor3" protocol tcp src-port 0-65535 dst-port 41781-41781 
set service "Crestron-Processor4" protocol tcp src-port 0-65535 dst-port 6000-6000 
set alg appleichat enable
unset alg appleichat re-assembly enable
set alg sctp enable
set auth-server "Local" id 0
set auth-server "Local" server-name "Local"
set auth default auth server "Local"
set auth radius accounting port 1646
set admin name "XXXXXXXXXX"
set admin password "XXXXXXXXXX"
set admin auth web timeout 10
set admin auth dial-in timeout 3
set admin auth server "Local"
set admin format dos
set zone "Trust" vrouter "trust-vr"
set zone "Untrust" vrouter "trust-vr"
set zone "DMZ" vrouter "trust-vr"
set zone "VLAN" vrouter "trust-vr"
set zone "Untrust-Tun" vrouter "trust-vr"
set zone "Trust" tcp-rst 
set zone "Trust" asymmetric-vpn
set zone "Untrust" block 
unset zone "Untrust" tcp-rst 
set zone "MGT" block 
unset zone "V1-Trust" tcp-rst 
unset zone "V1-Untrust" tcp-rst 
set zone "DMZ" tcp-rst 
unset zone "V1-DMZ" tcp-rst 
unset zone "VLAN" tcp-rst 
set zone "Untrust" screen tear-drop
set zone "Untrust" screen syn-flood
set zone "Untrust" screen ping-death
set zone "Untrust" screen ip-filter-src
set zone "Untrust" screen land
set zone "V1-Untrust" screen tear-drop
set zone "V1-Untrust" screen syn-flood
set zone "V1-Untrust" screen ping-death
set zone "V1-Untrust" screen ip-filter-src
set zone "V1-Untrust" screen land
set interface "ethernet0/0" zone "Untrust"
set interface "ethernet0/1" zone "DMZ"
set interface "bgroup0" zone "Trust"
set interface "tunnel.1" zone "Trust"
set interface "tunnel.2" zone "Trust"
set interface bgroup0 port ethernet0/2
set interface bgroup0 port ethernet0/3
set interface bgroup0 port ethernet0/4
set interface bgroup0 port ethernet0/5
set interface bgroup0 port ethernet0/6
unset interface vlan1 ip
set interface ethernet0/0 ip XXXXXXXXXX/27
set interface ethernet0/0 route
set interface bgroup0 ip XXXXXXXXXX/24
set interface bgroup0 nat
set interface tunnel.1 ip XXXXXXXXXX/30
set interface tunnel.2 ip XXXXXXXXXX/30
set interface tunnel.1 mtu 1436
set interface tunnel.2 mtu 1436
unset interface vlan1 bypass-others-ipsec
unset interface vlan1 bypass-non-ip
unset interface ethernet0/0 ip manageable
set interface bgroup0 ip manageable
set interface bgroup0 manage mtrace
set interface ethernet0/0 vip interface-ip 37777 "Crestron-Mobile" XXXXXXXXXX
set interface ethernet0/0 vip interface-ip 41794 "Crestron-Processor" XXXXXXXXXX
set interface ethernet0/0 vip interface-ip 41795 "Crestron-Processor2" XXXXXXXXXX
set interface ethernet0/0 vip interface-ip 41781 "Crestron-Processor3" XXXXXXXXXX
set interface ethernet0/0 vip interface-ip 6000 "Crestron-Processor4" XXXXXXXXXX
set interface ethernet0/0 vip interface-ip 12001 "Crestron-Processor2" XXXXXXXXXX
set interface bgroup0 dhcp server service
set interface bgroup0 dhcp server enable
set interface bgroup0 dhcp server option gateway XXXXXXXXXX
set interface bgroup0 dhcp server option dns1 XXXXXXXXXX
set interface bgroup0 dhcp server option dns2 XXXXXXXXXX
set interface bgroup0 dhcp server ip XXXXXXXXXX to XXXXXXXXXX 
unset interface bgroup0 dhcp server config next-server-ip
set interface "serial0/0" modem settings "USR" init "AT&F"
set interface "serial0/0" modem settings "USR" active
set interface "serial0/0" modem speed 115200
set interface "serial0/0" modem retry 3
set interface "serial0/0" modem interval 10
set interface "serial0/0" modem idle-time 10
set flow tcp-mss
unset flow tcp-syn-check
unset flow tcp-syn-bit-check
set flow reverse-route clear-text prefer
set flow reverse-route tunnel always
set flow vpn-tcp-mss 1387
set pki authority default scep mode "auto"
set pki x509 default cert-path partial
set address "Trust" "XXXXXXXXXX/16" XXXXXXXXXX 255.255.0.0
set address "Trust" "XXXXXXXXXX/24" XXXXXXXXXX 255.255.255.0
set address "Trust" "XXXXXXXXXX/24" XXXXXXXXXX 255.255.255.0
set address "Trust" "XXXXXXXXXX/32" XXXXXXXXXX 255.255.255.255
set address "Trust" "AV-Phone" XXXXXXXXXX 255.255.255.255 "Audio Video iPhone stuff"
set address "Trust" "DVR" XXXXXXXXXX 255.255.255.255 "DVR"
set ippool "VPN Client IPs" XXXXXXXXXX XXXXXXXXXX
set user "Shared IKE User" uid 8
set user "Shared IKE User" ike-id fqdn "vpntracker.local" share-limit 1
set user "Shared IKE User" type ike
set user "Shared IKE User" "enable"
set user "XXXXXXXXXX" uid 10
set user "XXXXXXXXXX" type xauth
set user "XXXXXXXXXX" password "XXXXXXXXXX"
unset user "XXXXXXXXXX" type auth
set user "XXXXXXXXXX" "enable"
set user "XXXXXXXXXX" uid 12
set user "XXXXXXXXXX" type xauth
set user "XXXXXXXXXX" password "XXXXXXXXXX"
unset user "XXXXXXXXXX" type auth
set user "XXXXXXXXXX" "enable"
set user "XXXXXXXXXX" uid 9
set user "XXXXXXXXXX" type xauth
set user "XXXXXXXXXX" password "XXXXXXXXXX"
unset user "XXXXXXXXXX" type auth
set user "XXXXXXXXXX" "enable"
set user "XXXXXXXXXX" uid 11
set user "XXXXXXXXXX" type xauth
set user "XXXXXXXXXX" password "XXXXXXXXXX"
unset user "XXXXXXXXXX" type auth
set user "XXXXXXXXXX" "enable"
set user "XXXXXXXXXX" uid 7
set user "XXXXXXXXXX" type xauth
set user "XXXXXXXXXX" password "XXXXXXXXXX"
unset user "XXXXXXXXXX" type auth
set user "XXXXXXXXXX" "enable"
set user "XXXXXXXXXX" uid 13
set user "XXXXXXXXXX" type xauth
set user "XXXXXXXXXX" password "XXXXXXXXXX"
unset user "XXXXXXXXXX" type auth
set user "XXXXXXXXXX" "enable"
set user-group "Shared VPN Group" id 3
set user-group "Shared VPN Group" user "Shared IKE User"
set crypto-policy
exit
set ike p1-proposal "ike-prop-vpn-bb6bb6a5-1" preshare group2 esp aes128 sha-1 second 28800
set ike p1-proposal "ike-prop-vpn-bb6bb6a5-2" preshare group2 esp aes128 sha-1 second 28800
set ike p2-proposal "ipsec-prop-vpn-bb6bb6a5-1" group2 esp aes128 sha-1 second 3600
set ike p2-proposal "ipsec-prop-vpn-bb6bb6a5-2" group2 esp aes128 sha-1 second 3600
set ike gateway "gw-vpn-bb6bb6a5-1" address XXXXXXXXXX id "XXXXXXXXXX" Main outgoing-interface "ethernet0/0" preshare "XXXXXXXXXX" proposal "ike-prop-vpn-bb6bb6a5-1"
set ike gateway "gw-vpn-bb6bb6a5-1" dpd-liveness interval 10
set ike gateway "gw-vpn-bb6bb6a5-2" address XXXXXXXXXX id "XXXXXXXXXX" Main outgoing-interface "ethernet0/0" preshare "XXXXXXXXXX" proposal "ike-prop-vpn-bb6bb6a5-2"
set ike gateway "gw-vpn-bb6bb6a5-2" dpd-liveness interval 10
set ike gateway "VPN Tracker" dialup "Shared VPN Group" Aggr outgoing-interface "ethernet0/0" preshare "XXXXXXXXXX" sec-level standard
unset ike gateway "VPN Tracker" nat-traversal udp-checksum
set ike gateway "VPN Tracker" nat-traversal keepalive-frequency 5
set ike gateway "VPN Tracker" xauth
unset ike gateway "VPN Tracker" xauth do-edipi-auth
set ike respond-bad-spi 1
set ike ikev2 ike-sa-soft-lifetime 60
unset ike ikeid-enumeration
unset ike dos-protection
unset ipsec access-session enable
set ipsec access-session maximum 5000
set ipsec access-session upper-threshold 0
set ipsec access-session lower-threshold 0
set ipsec access-session dead-p2-sa-timeout 0
unset ipsec access-session log-error
unset ipsec access-session info-exch-connected
unset ipsec access-session use-error-log
set xauth default ippool "VPN Client IPs"
set vpn "IPSEC-vpn-bb6bb6a5-1" gateway "gw-vpn-bb6bb6a5-1" replay tunnel idletime 0 proposal "ipsec-prop-vpn-bb6bb6a5-1" 
set vpn "IPSEC-vpn-bb6bb6a5-1" id 0x1 bind interface tunnel.1
set vpn "IPSEC-vpn-bb6bb6a5-2" gateway "gw-vpn-bb6bb6a5-2" replay tunnel idletime 0 proposal "ipsec-prop-vpn-bb6bb6a5-2" 
set vpn "IPSEC-vpn-bb6bb6a5-2" id 0x2 bind interface tunnel.2
set vpn "VPN Tracker" gateway "VPN Tracker" no-replay tunnel idletime 0 sec-level standard
set vrouter "untrust-vr"
exit
set vrouter "trust-vr"
exit
set url protocol websense
exit
set policy id 6 from "Untrust" to "Trust"  "Dial-Up VPN" "XXXXXXXXXX/24" "ANY" tunnel vpn "VPN Tracker" id 0x6 
set policy id 6
exit
set policy id 5 from "Untrust" to "Trust"  "Any" "XXXXXXXXXX/24" "ANY" permit 
set policy id 5
exit
set policy id 1 from "Trust" to "Untrust"  "Any" "Any" "ANY" permit traffic priority 0 mbw 100000
set policy id 1
exit
set policy id 2 name "AV-iPhone" from "Untrust" to "Trust"  "Any" "AV-Phone" "AV-iPhone" permit 
set policy id 2
exit
set policy id 4 name "Crestron-Mobile" from "Untrust" to "Trust"  "Any" "VIP(ethernet0/0)" "Crestron-Mobile" permit 
set policy id 4
exit
set policy id 7 from "Untrust" to "Trust"  "Dial-Up VPN" "XXXXXXXXXX/16" "ANY" tunnel vpn "VPN Tracker" id 0x7 
set policy id 7
exit
set policy id 8 name "Crestron-Processor" from "Untrust" to "Trust"  "Any" "VIP(ethernet0/0)" "Crestron-Processor" permit 
set policy id 8
exit
set policy id 9 name "Crestron-Mobile" from "Untrust" to "Trust"  "Any" "VIP(ethernet0/0)" "Crestron-Processor2" permit 
set policy id 9
exit
set policy id 10 name "Crestron-Mobile" from "Untrust" to "Trust"  "Any" "VIP(ethernet0/0)" "Crestron-Processor3" permit 
set policy id 10
exit
set policy id 11 name "Crestron-Mobile" from "Untrust" to "Trust"  "Any" "VIP(ethernet0/0)" "Crestron-Processor4" permit 
set policy id 11
exit
set nsmgmt bulkcli reboot-timeout 60
set ssh version v2
set ssh enable
set config lock timeout 5
unset license-key auto-update
set telnet client enable
set snmp port listen 161
set snmp port trap 162
set vrouter "untrust-vr"
exit
set vrouter "trust-vr"
set max-ecmp-routes 2
set protocol bgp 65000
set enable
set hold-time 30
set neighbor 169.254.249.25 remote-as 7224
set neighbor 169.254.249.25 enable
set neighbor 169.254.249.29 remote-as 7224
set neighbor 169.254.249.29 enable
set ipv4 advertise-def-route
set ipv4 neighbor 169.254.249.25 activate
set ipv4 neighbor 169.254.249.29 activate
set ipv4 network 0.0.0.0/0

exit
unset add-default-route
set route XXXXXXXXXX/0 interface ethernet0/0
exit
set interface tunnel.1 protocol bgp
set interface tunnel.2 protocol bgp
set vrouter "untrust-vr"
exit
set vrouter "trust-vr"
exit

有谁发现有什么明显的东西吗?

答案1

尝试使用小型 SOHO 路由器(例如 dlink 或 linksys)。SSG5 是入门级防火墙,在大型 ISP 链路上,数据包检查服务可以杀死防火墙,而 SOHO 路由器则不进行任何检查,就像您的 PC 一样。

如果测试成功,则需要升级路由器。

相关内容