☰

通过 Strongswan 将服务器连接到我的家庭网络（收到 I​​NVALID_ID_INFORMATION 错误通知）

tag-icon • tag-icon vpn strongswan
通过 Strongswan 将服务器连接到我的家庭网络（收到 I​​NVALID_ID_INFORMATION 错误通知）

我尝试通过 strongswan 从我的根服务器到我的家庭网络建立 VPN 连接。我已将路由器 (FritzBox 7490) 配置为 VPN PSK XAUTH 连接。我的 Android 智能手机的 VPN 连接正常。

我正在努力正确配置 strongswan。我研究了手册，但没有头绪。我甚至不确定如何解释日志。

这两个配置文件和日志是：

/etc/strongswan/ipsec.conf

#/etc/strongswan/ipsec.conf
config setup
        uniqueids=no
        #charondebug="ike 4, knl 4, cfg 4, mgr 4, chd 4, dmn 4, esp 4, lib 4, tnc 4"

conn %default
        ike=aes256-sha-modp1024!
        esp=3des-md5!
        ikelifetime=60m
        keylife=20m
        rekeymargin=3m
        keyingtries=1
        keyexchange=ikev1

conn wb
        auto=add
        aggressive=yes
        xauth_identity=montblanc
        left=5.196.66.46
        leftid=keyid:montblanc
        leftsourceip=%config4
        #leftgroups2=montblanc
        #leftfirewall=yes
        leftauth=psk
        leftauth2=xauth
        right=nanga.no-ip.biz
        rightid=%any
        rightsubnet=192.168.178.0/24
        rightauth=psk

/etc/ipsec.secrets

# /etc/ipsec.secrets - strongSwan IPsec secrets file
%any : PSK "something"
montblanc : XAUTH "somethingelse"

连接时记录：

initiating Aggressive Mode IKE_SA wb[3] to 93.104.35.40
generating AGGRESSIVE request 0 [ SA KE No ID V V V V ]
sending packet: from 5.196.66.46[500] to 93.104.35.40[500] (341 bytes)
received packet: from 93.104.35.40[500] to 5.196.66.46[500] (412 bytes)
parsed AGGRESSIVE response 0 [ SA KE No ID HASH V V V V V NAT-D NAT-D ]
received XAuth vendor ID
received DPD vendor ID
received NAT-T (RFC 3947) vendor ID
received draft-ietf-ipsec-nat-t-ike-03 vendor ID
received unknown vendor ID: a2:22:6f:c3:64:50:0f:56:34:ff:77:db:3b:74:f4:1b
generating AGGRESSIVE request 0 [ NAT-D NAT-D HASH ]
sending packet: from 5.196.66.46[500] to 93.104.35.40[500] (108 bytes)
received packet: from 93.104.35.40[500] to 5.196.66.46[500] (92 bytes)
parsed INFORMATIONAL_V1 request 3080152599 [ HASH N(INITIAL_CONTACT) ]
received packet: from 93.104.35.40[500] to 5.196.66.46[500] (92 bytes)
parsed TRANSACTION request 3809505870 [ HASH CPRQ(X_TYPE X_USER X_PWD) ]
generating TRANSACTION response 3809505870 [ HASH CPRP(X_USER X_PWD) ]
sending packet: from 5.196.66.46[500] to 93.104.35.40[500] (108 bytes)
received packet: from 93.104.35.40[500] to 5.196.66.46[500] (76 bytes)
parsed TRANSACTION request 3809505870 [ HASH CPS(X_STATUS) ]
XAuth authentication of 'montblanc' (myself) successful
IKE_SA wb[3] established between 5.196.66.46[montblanc]...93.104.35.40[93.104.35.40]
scheduling reauthentication in 3410s
maximum IKE_SA lifetime 3590s
generating TRANSACTION response 3809505870 [ HASH CPA(X_STATUS) ]
sending packet: from 5.196.66.46[500] to 93.104.35.40[500] (76 bytes)
generating TRANSACTION request 835986006 [ HASH CPRQ(ADDR DNS) ]
sending packet: from 5.196.66.46[500] to 93.104.35.40[500] (76 bytes)
received packet: from 93.104.35.40[500] to 5.196.66.46[500] (76 bytes)
parsed TRANSACTION response 835986006 [ HASH CPRP(ADDR DNS) ]
installing DNS server 192.168.178.1 to /etc/strongswan/resolv.conf
installing new virtual IP 192.168.178.202
generating QUICK_MODE request 2471505598 [ HASH SA No ID ID ]
sending packet: from 5.196.66.46[500] to 93.104.35.40[500] (172 bytes)
received packet: from 93.104.35.40[500] to 5.196.66.46[500] (76 bytes)
parsed INFORMATIONAL_V1 request 1883469062 [ HASH N(INVAL_ID) ]
received INVALID_ID_INFORMATION error notify
establishing connection 'wb' failed

我很高兴接受所有建议。

答案1

当客户端在 IKEv1 快速模式交换期间收到 INVALID_ID_INFORMATION 通知时，这意味着响应者不喜欢 ID 有效负载的内容，这些有效负载用于传输这些交换中的流量选择器（子网）。这可能是因为子网配置不正确（它们必须在两端匹配）。比较配置并根据实现情况查阅响应者的日志可能会有所帮助。

一些 IKEv1 实现使用 Cisco Unity 扩展，允许在 ModeConfig 交换期间传输隧道远程子网。通常，它们会期望快速模式交换中的远程子网设置为，0.0.0.0/0而不是任何实际子网。因此，请尝试启用unity 插件在 strongSwan 中并进行配置rightsubnet=0.0.0.0/0，这可能是响应者所期望的。

相关内容