编辑:这是我使用代码重命名接口后的确切情况。
这是我的 netplan 配置文件:
network:
version: 2
renderer: networkd
ethernets:
eno1:
dhcp4: no
dhcp6: no
addresses: [192.168.1.93/24]
gateway4: 192.168.1.91
nameservers:
addresses: [8.8.8.8, 8.8.4.4]
以下是输出ip 地址 ls
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: rename2: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
link/ether 00:1e:67:d6:33:24 brd ff:ff:ff:ff:ff:ff
3: eno1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP mode DEFAULT group default qlen 1000
link/ether 00:1e:67:d6:33:25 brd ff:ff:ff:ff:ff:ff
当我跑步时sudo netplan--debug 生成我得到这个输出:
** (generate:1571): DEBUG: 00:08:01.444: Processing input file //etc/netplan/10-systemd-networkd-eth.yaml..
** (generate:1571): DEBUG: 00:08:01.444: starting new processing pass
** (generate:1571): DEBUG: 00:08:01.444: eno1: setting default backend to 1
** (generate:1571): DEBUG: 00:08:01.444: Generating output files..
** (generate:1571): DEBUG: 00:08:01.444: NetworkManager: definition eno1 is not for us (backend 1)
以下是输出systemctl status systemd-networkd:
systemd-networkd.service - Network Service
Loaded: loaded (/lib/systemd/system/systemd-networkd.service; enabled; vendor preset: enabled)
Active: active (running) since Wed 2018-08-29 23:31:20 IST; 1h 1min ago
Docs: man:systemd-networkd.service(8)
Main PID: 570 (systemd-network)
Status: "Processing requests..."
Tasks: 1 (limit: 4915)
CGroup: /system.slice/systemd-networkd.service
└─570 /lib/systemd/systemd-networkd
Aug 29 23:31:19 august2018 systemd[1]: Starting Network Service...
Aug 29 23:31:20 august2018 systemd-networkd[570]: Enumeration completed
Aug 29 23:31:20 august2018 systemd[1]: Started Network Service.
Aug 29 23:35:01 august2018 systemd-networkd[570]: eno1: Gained carrier
Aug 29 23:35:03 august2018 systemd-networkd[570]: eno1: Gained IPv6LL
答案1
您使用了文字字符串,ethMac
而实际接口名称应该是该字符串。请将其更改为接口名称,您可以通过运行命令来了解该名称ip link
。