如何在 Rocks 集群分布上恢复 Intel RAID 0

如何在 Rocks 集群分布上恢复 Intel RAID 0

我们的集群上有 Rocks 5.5 发行版,并且想要升级到 6.2。 “/export”分区安装在由 2 个相同硬盘 (HD)(/dev/sdb 和 /dev/sdc)组成的 Intel 软件 RAID 0 阵列上,其余分区即“/”、“/var”和在单独的(启动)HD 或“/dev/sda”上“交换”。

第一次升级尝试失败了,因为警告说它已在硬盘上发现了 raid 信息,无法进一步进行。我天真地通过执行解决了这个问题:

dmraid -r -E /dev/sda

错误没有再次出现,我能够执行升级。使用手动分区,我格式化了启动硬盘,并保持RAID阵列未格式化并再次挂载为“/export”。

安装完成后,启动过程失败,说

ERROR: ddf1: Cannot find physical drive description on /dev/sdc!
ERROR: ddf1: setting up RAID device /dev/sdc
ERROR: ddf1: Cannot find physical drive description on /dev/sdb!
ERROR: ddf1: setting up RAID device /dev/sdb
/export1: The filesystem size (according to the superblock) is 488378000 blocks
The physical size of the device is 244190638 blocks
Either the superblock or partition table is likely to be corrupt!

在“救援”模式下启动 Rocks,我们能够再次安装驱动器,尽管它说 RAID 分区未完全卸载。

“dmraid”显示 RAID 阵列,但有错误:

$ dmraid -r
ERROR: ddf1: Cannot find physical drive description on /dev/sdc!
ERROR: ddf1: setting up RAID device /dev/sdc
ERROR: ddf1: Cannot find physical drive description on /dev/sdb!
ERROR: ddf1: setting up RAID device /dev/sdb
/dev/sdc: isw, "isw_eecceiche", GROUP, ok, 1953525166 sectors, data@ 0
/dev/sdb: isw, "isw_eecceiche", GROUP, ok, 1953525166 sectors, data@ 0

$ dmraid -s
ERROR: ddf1: Cannot find physical drive description on /dev/sdc!
ERROR: ddf1: setting up RAID device /dev/sdc
ERROR: ddf1: Cannot find physical drive description on /dev/sdb!
ERROR: ddf1: setting up RAID device /dev/sdb
*** Group superset isw_eecceiche
--> Active Subset
name   : isw_eecceiche_Volume0
size   : 3907038720
stride : 256
type   : stripe
status : ok
subsets: 0
devs   : 2
spares : 0

这是“fstab”:

#
# /etc/fstab
# Created by anaconda on Tue Sep 15 17:35:11 2015
#
# Accessible filesystems, by reference, are maintained under '/dev/disk'
# See man pages fstab(5), findfs(8), mount(8) and/or blkid(8) for more info
#
UUID=90471019-650c-4901-a8f1-e8cce3fbc059 /                       ext4    defaults        1 1
UUID=5dae925e-6e01-4442-8f5b-07bfbde7ff09 /export                 ext2    defaults        1 2
UUID=18303228-189f-4fa3-9661-71786323d70d /var                    ext4    defaults        1 2
UUID=d14c42ec-e41a-4dbd-b6b8-60afb4aa1b14 swap                    swap    defaults        0 0
tmpfs                   /dev/shm                tmpfs   defaults        0 0
devpts                  /dev/pts                devpts  gid=5,mode=620  0 0
sysfs                   /sys                    sysfs   defaults        0 0
proc                    /proc                   proc    defaults        0 0

# The ram-backed filesystem for ganglia RRD graph databases.
tmpfs /var/lib/ganglia/rrds tmpfs size=2045589000,gid=nobody,uid=nobody,defaults 1 0

和“blkid”:

/dev/loop0: TYPE="squashfs" 
/dev/sda1: UUID="90471019-650c-4901-a8f1-e8cce3fbc059" TYPE="ext4" 
/dev/sda2: UUID="18303228-189f-4fa3-9661-71786323d70d" TYPE="ext4" 
/dev/sda3: UUID="d14c42ec-e41a-4dbd-b6b8-60afb4aa1b14" TYPE="swap" 
/dev/sdb: UUID="M-^?M-^?M-^?M-^?M-^?M-^?M-^?M-^?M-^?M-^?M-^?M-^?M-^?M-^?M-^?M-^?M-^?M-^?M-^?M-^?M-^?M-^?M-^?M-^?" TYPE="ddf_raid_member" 
/dev/sdc: UUID="M-^?M-^?M-^?M-^?M-^?M-^?M-^?M-^?M-^?M-^?M-^?M-^?M-^?M-^?M-^?M-^?M-^?M-^?M-^?M-^?M-^?M-^?M-^?M-^?" TYPE="ddf_raid_member" 
/dev/sde1: LABEL="Expansion Drive" UUID="BC448C59448C1872" TYPE="ntfs" 
/dev/sdd1: UUID="66F2-41D7" TYPE="vfat" 
/dev/mapper/isw_eecceiche_Volume0p1: LABEL="/export1" UUID="5dae925e-6e01-4442-8f5b-07bfbde7ff09" TYPE="ext2" 

还有“fdisk”输出:

Disk /dev/sda: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk identifier: 0x44f45cd4

   Device Boot      Start         End      Blocks   Id  System
/dev/sda1   *           1      111403   894841856   83  Linux
/dev/sda2          111403      119562    65536000   83  Linux
/dev/sda3          119562      121602    16382976   82  Linux swap / Solaris

Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00045387

   Device Boot      Start         End      Blocks   Id  System
/dev/sdb1   *           1      243201  1953512001   83  Linux

Disk /dev/sdc: 1000.2 GB, 1000204886016 bytes
6 heads, 1 sectors/track, 325587528 cylinders
Units = cylinders of 6 * 512 = 3072 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000

This doesn't look like a partition table
Probably you selected the wrong device.

   Device Boot      Start         End      Blocks   Id  System
/dev/sdc1           22094       22341         743+  cf  Unknown
/dev/sdc2   ?           1           1           0    0  Empty
Partition 2 does not end on cylinder boundary.
/dev/sdc3       357936035   357936283         743+  cf  Unknown
/dev/sdc4               1           1           0    0  Empty
Partition 4 does not end on cylinder boundary.

Disk /dev/mapper/isw_eecceiche_Volume0: 2000.4 GB, 2000403824640 bytes
255 heads, 63 sectors/track, 243201 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 131072 bytes / 262144 bytes
Disk identifier: 0x00045387

                             Device Boot      Start         End      Blocks   Id  System
/dev/mapper/isw_eecceiche_Volume0p1   *           1      243201  1953512001   83  Linux
Partition 1 does not start on physical sector boundary.

Disk /dev/mapper/isw_eecceiche_Volume0p1: 2000.4 GB, 2000396289024 bytes
255 heads, 63 sectors/track, 243200 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 131072 bytes / 262144 bytes
Alignment offset: 98816 bytes
Disk identifier: 0x00000000

我们可以访问“/export”分区,并且其数据在“救援”模式下仍然可用。

我很高兴知道是否有一种方法可以再次重建 RAID 元数据,而无需格式化或删除/重建阵列。

非常感谢任何解决此问题的帮助。

相关内容