我决定在我的计算机上双启动 Windows 7 和 Ubuntu 13.04。但是当我尝试安装 Ubuntu 13.04 时，安装程序显示我至少没有 5.3 GB 的磁盘空间。在“尝试 ubuntu”中，我检查了磁盘实用程序、系统监视器和 gParted，它们都没有列出我的硬盘（我有 2 个硬盘，1 个是 80GB，另一个是 500GB，两者都是空的并且是 IDE）。我的 Windows 7 可以运行，并检测到所有硬盘（所以这可能不是 ah/w 问题）
我尝试了几种方法来解决此问题，但都失败了。注意：我查看了这个网站，发现有几个问题与我的问题完全一样，但没有一个得到充分的回答来解决我的问题。以下是一些最终结果
sudo dmesg-（这个东西很长）
[ 0.128378] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[ 0.128434] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
[ 0.128484] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT]
[ 0.128533] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
[ 0.128581] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 0.128800] pci0000:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[ 0.128803] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08)
[ 0.130120] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 *10 11 12 14 15)
[ 0.130191] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[ 0.130260] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *9 10 11 12 14 15)
[ 0.130328] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 11 12 14 *15)
[ 0.130396] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.130466] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.130536] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.130606] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 *5 7 9 10 11 12 14 15)
[ 0.132020] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.132028] vgaarb: loaded
[ 0.132030] vgaarb: bridge control possible 0000:00:02.0
[ 0.132369] SCSI subsystem initialized
[ 0.132373] ACPI: bus type scsi registered
[ 0.132388] libata version 3.00 loaded.
[ 0.132388] ACPI: bus type usb registered
[ 0.132388] usbcore: registered new interface driver usbfs
[ 0.132388] usbcore: registered new interface driver hub
[ 0.132388] usbcore: registered new device driver usb
[ 0.132388] PCI: Using ACPI for IRQ routing
[ 0.141956] PCI: pci_cache_line_size set to 64 bytes
[ 0.142037] e820: reserve RAM buffer [mem 0x0009f400-0x0009ffff]
[ 0.142040] e820: reserve RAM buffer [mem 0x5f590000-0x5fffffff]
[ 0.142182] NetLabel: Initializing
[ 0.142185] NetLabel: domain hash size = 128
[ 0.142187] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.142202] NetLabel: unlabeled traffic allowed by default
[ 0.142222] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.142222] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.142222] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.144021] Switching to clocksource hpet
[ 0.158967] AppArmor: AppArmor Filesystem Enabled
[ 0.159020] pnp: PnP ACPI init
[ 0.159047] ACPI: bus type pnp registered
[ 0.159308] system 00:00: [io 0x04d0-0x04d1] has been reserved
[ 0.159315] system 00:00: [io 0x0800-0x087f] has been reserved
[ 0.159321] system 00:00: [io 0x0880-0x088f] has been reserved
[ 0.159329] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.159355] pnp 00:01: [dma 4]
[ 0.159402] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.159566] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.159653] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.159706] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.159770] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.160151] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.160512] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.161028] pnp 00:08: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.161229] pnp 00:09: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.161325] pnp 00:0a: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.161445] system 00:0b: [io 0x0400-0x04bf] has been reserved
[ 0.161453] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.161526] pnp 00:0c: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.161947] system 00:0d: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.161955] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.162178] system 00:0e: [mem 0x000f0000-0x000fffff] could not be reserved
[ 0.162185] system 00:0e: [mem 0x5f600000-0x5f6fffff] has been reserved
[ 0.162191] system 00:0e: [mem 0xfed00000-0xfed000ff] has been reserved
[ 0.162197] system 00:0e: [mem 0x5f590000-0x5f5fffff] could not be reserved
[ 0.162202] system 00:0e: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.162208] system 00:0e: [mem 0x00100000-0x5f58ffff] could not be reserved
[ 0.162214] system 00:0e: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.162220] system 00:0e: [mem 0xfed13000-0xfed1dfff] has been reserved
[ 0.162226] system 00:0e: [mem 0xfed20000-0xfed8ffff] has been reserved
[ 0.162232] system 00:0e: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.162237] system 00:0e: [mem 0xffb00000-0xffb7ffff] has been reserved
[ 0.162243] system 00:0e: [mem 0xfff00000-0xffffffff] has been reserved
[ 0.162249] system 00:0e: [mem 0x000e0000-0x000effff] has been reserved
[ 0.162256] system 00:0e: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.162269] pnp: PnP ACPI: found 15 devices
[ 0.162272] ACPI: ACPI bus type pnp unregistered
[ 0.162279] PnPBIOS: Disabled by ACPI PNP
[ 0.200273] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.200280] pci 0000:00:1c.0: bridge window [io 0xb000-0xbfff]
[ 0.200288] pci 0000:00:1c.0: bridge window [mem 0xfd400000-0xfd4fffff]
[ 0.200294] pci 0000:00:1c.0: bridge window [mem 0xfde00000-0xfdefffff 64bit pref]
[ 0.200302] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.200307] pci 0000:00:1c.1: bridge window [io 0xa000-0xafff]
[ 0.200313] pci 0000:00:1c.1: bridge window [mem 0xfdd00000-0xfddfffff]
[ 0.200319] pci 0000:00:1c.1: bridge window [mem 0xfdc00000-0xfdcfffff 64bit pref]
[ 0.200327] pci 0000:00:1c.2: PCI bridge to [bus 03]
[ 0.200332] pci 0000:00:1c.2: bridge window [io 0xe000-0xefff]
[ 0.200338] pci 0000:00:1c.2: bridge window [mem 0xfdb00000-0xfdbfffff]
[ 0.200344] pci 0000:00:1c.2: bridge window [mem 0xfda00000-0xfdafffff 64bit pref]
[ 0.200352] pci 0000:00:1c.3: PCI bridge to [bus 04]
[ 0.200357] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
[ 0.200363] pci 0000:00:1c.3: bridge window [mem 0xfd900000-0xfd9fffff]
[ 0.200369] pci 0000:00:1c.3: bridge window [mem 0xfd800000-0xfd8fffff 64bit pref]
[ 0.200377] pci 0000:00:1e.0: PCI bridge to [bus 05]
[ 0.200381] pci 0000:00:1e.0: bridge window [io 0xc000-0xcfff]
[ 0.200388] pci 0000:00:1e.0: bridge window [mem 0xfd600000-0xfd6fffff]
[ 0.200394] pci 0000:00:1e.0: bridge window [mem 0xfd500000-0xfd5fffff 64bit pref]
[ 0.200455] pci 0000:00:1e.0: setting latency timer to 64
[ 0.200461] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.200464] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.200468] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.200471] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
[ 0.200475] pci_bus 0000:00: resource 8 [mem 0x5f600000-0xfebfffff]
[ 0.200479] pci_bus 0000:01: resource 0 [io 0xb000-0xbfff]
[ 0.200482] pci_bus 0000:01: resource 1 [mem 0xfd400000-0xfd4fffff]
[ 0.200486] pci_bus 0000:01: resource 2 [mem 0xfde00000-0xfdefffff 64bit pref]
[ 0.200490] pci_bus 0000:02: resource 0 [io 0xa000-0xafff]
[ 0.200493] pci_bus 0000:02: resource 1 [mem 0xfdd00000-0xfddfffff]
[ 0.200497] pci_bus 0000:02: resource 2 [mem 0xfdc00000-0xfdcfffff 64bit pref]
[ 0.200501] pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
[ 0.200504] pci_bus 0000:03: resource 1 [mem 0xfdb00000-0xfdbfffff]
[ 0.200508] pci_bus 0000:03: resource 2 [mem 0xfda00000-0xfdafffff 64bit pref]
[ 0.200511] pci_bus 0000:04: resource 0 [io 0xd000-0xdfff]
[ 0.200515] pci_bus 0000:04: resource 1 [mem 0xfd900000-0xfd9fffff]
[ 0.200519] pci_bus 0000:04: resource 2 [mem 0xfd800000-0xfd8fffff 64bit pref]
[ 0.200522] pci_bus 0000:05: resource 0 [io 0xc000-0xcfff]
[ 0.200526] pci_bus 0000:05: resource 1 [mem 0xfd600000-0xfd6fffff]
[ 0.200529] pci_bus 0000:05: resource 2 [mem 0xfd500000-0xfd5fffff 64bit pref]
[ 0.200533] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7]
[ 0.200536] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff]
[ 0.200540] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.200543] pci_bus 0000:05: resource 7 [mem 0x000c0000-0x000dffff]
[ 0.200547] pci_bus 0000:05: resource 8 [mem 0x5f600000-0xfebfffff]
[ 0.200597] NET: Registered protocol family 2
[ 0.200876] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.200920] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.200960] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.200996] TCP: reno registered
[ 0.201001] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.201016] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.201116] NET: Registered protocol family 1
[ 0.201140] pci 0000:00:02.0: Boot video device
[ 0.201325] PCI: CLS 32 bytes, default 64
[ 0.201398] Trying to unpack rootfs image as initramfs...
[ 10.692661] Freeing initrd memory: 21568k freed
[ 10.706208] Initialise module verification
[ 10.706286] audit: initializing netlink socket (disabled)
[ 10.706307] type=2000 audit(1372874756.700:1): initialized
[ 10.738544] bounce pool size: 64 pages
[ 10.738562] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 10.740772] VFS: Disk quotas dquot_6.5.2
[ 10.740849] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 10.741673] fuse init (API version 7.20)
[ 10.741794] msgmni has been set to 1729
[ 10.742311] Key type asymmetric registered
[ 10.742315] Asymmetric key parser 'x509' registered
[ 10.742373] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 10.742409] io scheduler noop registered
[ 10.742413] io scheduler deadline registered (default)
[ 10.742425] io scheduler cfq registered
[ 10.742624] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[ 10.742743] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
[ 10.742857] pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X
[ 10.742970] pcieport 0000:00:1c.3: irq 43 for MSI/MSI-X
[ 10.743069] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 10.743097] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 10.743206] intel_idle: does not run on family 6 model 15
[ 10.743300] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 10.743308] ACPI: Power Button [PWRB]
[ 10.743379] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 10.743384] ACPI: Power Button [PWRF]
[ 10.743505] ACPI: Requesting acpi_cpufreq
[ 10.747494] GHES: HEST is not enabled!
[ 10.747526] isapnp: Scanning for PnP cards...
[ 10.752074] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 10.772550] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 10.793060] 00:07: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 10.795333] Linux agpgart interface v0.103
[ 10.795500] agpgart-intel 0000:00:00.0: Intel G33 Chipset
[ 10.795578] agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
[ 10.796022] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
[ 10.796189] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 10.798495] brd: module loaded
[ 10.799764] loop: module loaded
[ 10.799986] ata_piix 0000:00:1f.1: version 2.13
[ 10.800080] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 10.800534] scsi0 : ata_piix
[ 10.801120] scsi1 : ata_piix
[ 10.801441] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfa00 irq 14
[ 10.801447] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfa08 irq 15
[ 10.801480] ata_piix 0000:00:1f.2: MAP [
[ 10.801483] P0 P2 P1 P3 ]
[ 10.801535] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 10.801929] scsi2 : ata_piix
[ 10.802321] scsi3 : ata_piix
[ 10.802661] ata3: SATA max UDMA/133 cmd 0xf900 ctl 0xf800 bmdma 0xf500 irq 19
[ 10.802666] ata4: SATA max UDMA/133 cmd 0xf700 ctl 0xf600 bmdma 0xf508 irq 19
[ 10.803203] libphy: Fixed MDIO Bus: probed
[ 10.803312] tun: Universal TUN/TAP device driver, 1.6
[ 10.803315] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
[ 10.803383] PPP generic driver version 2.4.2
[ 10.803440] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 10.803443] ehci-pci: EHCI PCI platform driver
[ 10.803482] ehci-pci 0000:00:1d.7: setting latency timer to 64
[ 10.803488] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 10.803497] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 10.803514] ehci-pci 0000:00:1d.7: debug port 1
[ 10.807423] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
[ 10.807450] ehci-pci 0000:00:1d.7: irq 23, io mem 0xfdfff000
[ 10.807696] ata2: port disabled--ignoring
[ 10.816024] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 10.816066] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 10.816072] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 10.816077] usb usb1: Product: EHCI Host Controller
[ 10.816082] usb usb1: Manufacturer: Linux 3.8.0-19-generic ehci_hcd
[ 10.816087] usb usb1: SerialNumber: 0000:00:1d.7
[ 10.816277] hub 1-0:1.0: USB hub found
[ 10.816289] hub 1-0:1.0: 8 ports detected
[ 10.816563] ehci-platform: EHCI generic platform driver
[ 10.816582] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 10.816621] uhci_hcd: USB Universal Host Controller Interface driver
[ 10.816661] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 10.816667] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 10.816677] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 10.816709] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000fe00
[ 10.816758] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 10.816764] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 10.816769] usb usb2: Product: UHCI Host Controller
[ 10.816773] usb usb2: Manufacturer: Linux 3.8.0-19-generic uhci_hcd
[ 10.816778] usb usb2: SerialNumber: 0000:00:1d.0
[ 10.816943] hub 2-0:1.0: USB hub found
[ 10.816952] hub 2-0:1.0: 2 ports detected
[ 10.817089] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 10.817096] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 10.817105] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 10.817138] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000fd00
[ 10.817186] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 10.817191] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 10.817196] usb usb3: Product: UHCI Host Controller
[ 10.817201] usb usb3: Manufacturer: Linux 3.8.0-19-generic uhci_hcd
[ 10.817206] usb usb3: SerialNumber: 0000:00:1d.1
[ 10.817348] hub 3-0:1.0: USB hub found
[ 10.817354] hub 3-0:1.0: 2 ports detected
[ 10.817496] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 10.817502] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 10.817512] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 10.817563] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000fc00
[ 10.817611] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 10.817617] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 10.817622] usb usb4: Product: UHCI Host Controller
[ 10.817626] usb usb4: Manufacturer: Linux 3.8.0-19-generic uhci_hcd
[ 10.817631] usb usb4: SerialNumber: 0000:00:1d.2
[ 10.817801] hub 4-0:1.0: USB hub found
[ 10.817810] hub 4-0:1.0: 2 ports detected
[ 10.817943] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 10.817950] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 10.817959] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 10.818004] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000fb00
[ 10.818055] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 10.818060] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 10.818065] usb usb5: Product: UHCI Host Controller
[ 10.818070] usb usb5: Manufacturer: Linux 3.8.0-19-generic uhci_hcd
[ 10.818075] usb usb5: SerialNumber: 0000:00:1d.3
[ 10.818240] hub 5-0:1.0: USB hub found
[ 10.818247] hub 5-0:1.0: 2 ports detected
[ 10.818510] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 10.821116] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 10.821128] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 10.821319] mousedev: PS/2 mouse device common for all mice
[ 10.821469] rtc_cmos 00:03: RTC can wake from S4
[ 10.821599] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 10.821628] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[ 10.821774] device-mapper: uevent: version 1.0.3
[ 10.821859] device-mapper: ioctl: 4.23.1-ioctl (2012-12-18) initialised: [email protected]
[ 10.821886] EISA: Probing bus 0 at eisa.0
[ 10.821890] EISA: Cannot allocate resource for mainboard
[ 10.821893] Cannot allocate resource for EISA slot 1
[ 10.821896] Cannot allocate resource for EISA slot 2
[ 10.821898] Cannot allocate resource for EISA slot 3
[ 10.821901] Cannot allocate resource for EISA slot 4
[ 10.821903] Cannot allocate resource for EISA slot 5
[ 10.821906] Cannot allocate resource for EISA slot 6
[ 10.821908] Cannot allocate resource for EISA slot 7
[ 10.821911] Cannot allocate resource for EISA slot 8
[ 10.821913] EISA: Detected 0 cards.
[ 10.821926] cpufreq-nforce2: No nForce2 chipset.
[ 10.821929] cpuidle: using governor ladder
[ 10.821931] cpuidle: using governor menu
[ 10.821938] ledtrig-cpu: registered to indicate activity on CPUs
[ 10.821940] EFI Variables Facility v0.08 2004-May-17
[ 10.822172] ashmem: initialized
[ 10.822399] TCP: cubic registered
[ 10.822598] NET: Registered protocol family 10
[ 10.822955] NET: Registered protocol family 17
[ 10.822972] Key type dns_resolver registered
[ 10.823301] Using IPI No-Shortcut mode
[ 10.823433] Loading module verification certificates
[ 10.831008] MODSIGN: Loaded cert 'Magrathea: Glacier signing key: fceb9fd088cf158e29d83343e1c98bf8ab23d94a'
[ 10.831031] registered taskstats version 1
[ 10.835051] Key type trusted registered
[ 10.839070] Key type encrypted registered
[ 10.843365] rtc_cmos 00:03: setting system clock to 2013-07-03 18:05:57 UTC (1372874757)
[ 10.843830] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 10.843834] EDD information not available.
[ 10.849869] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[ 10.984399] ata1.00: ATAPI: HL-DT-STDVD-RAM GH22NP20, 1.03, max UDMA/66
[ 10.984423] ata1.01: ATAPI: HL-DT-ST GCE-8527B, 1.02, max UDMA/33
[ 11.000261] ata1.00: configured for UDMA/66
[ 11.048217] ata1.01: configured for UDMA/33
[ 11.101005] isapnp: No Plug & Play device found
[ 11.102214] scsi 0:0:0:0: CD-ROM HL-DT-ST DVD-RAM GH22NP20 1.03 PQ: 0 ANSI: 5
[ 11.103973] sr0: scsi3-mmc drive: 125x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 11.103978] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 11.104167] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 11.104310] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 11.106319] scsi 0:0:1:0: CD-ROM HL-DT-ST CD-RW GCE-8527B 1.02 PQ: 0 ANSI: 5
[ 11.108913] sr1: scsi3-mmc drive: 52x/52x writer cd/rw xa/form2 cdda tray
[ 11.109078] sr 0:0:1:0: Attached scsi CD-ROM sr1
[ 11.109205] sr 0:0:1:0: Attached scsi generic sg1 type 5
[ 11.128043] usb 1-4: new high-speed USB device number 2 using ehci-pci
[ 11.279021] usb 1-4: New USB device found, idVendor=0ac8, idProduct=3450
[ 11.279027] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 11.279032] usb 1-4: Product: see me here
[ 11.279037] usb 1-4: Manufacturer: see me here
[ 11.704025] tsc: Refined TSC clocksource calibration: 1591.107 MHz
[ 11.704033] Switching to clocksource tsc
[ 16.000018] ata3: link is slow to respond, please be patient (ready=0)
[ 20.816019] ata3: SRST failed (errno=-16)
[ 26.012017] ata3: link is slow to respond, please be patient (ready=0)
[ 30.828019] ata3: SRST failed (errno=-16)
[ 36.024016] ata3: link is slow to respond, please be patient (ready=0)
[ 65.872022] ata3: SRST failed (errno=-16)
[ 70.900022] ata3: SRST failed (errno=-16)
[ 70.910713] ata3: reset failed, giving up
[ 70.910807] Freeing unused kernel memory: 784k freed
[ 70.911109] Write protecting the kernel text: 6252k
[ 70.911214] Write protecting the kernel read-only data: 2432k
[ 70.911216] NX-protecting the kernel data: 3988k
[ 70.933314] udevd[108]: starting version 175
[ 71.031144] [drm] Initialized drm 1.1.0 20060810
[ 71.060859] Disabling lock debugging due to kernel taint
[ 71.081024] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 71.081243] r8169 0000:02:00.0: irq 44 for MSI/MSI-X
[ 71.081487] r8169 0000:02:00.0 eth0: RTL8102e at 0xf840c000, 00:e0:4c:1e:9d:9e, XID 04c00000 IRQ 44
[ 71.137892] i915 0000:00:02.0: setting latency timer to 64
[ 71.138238] i915 0000:00:02.0: irq 45 for MSI/MSI-X
[ 71.138254] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 71.138257] [drm] Driver supports precise vblank timestamp query.
[ 71.138299] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 71.143241] [drm] initialized overlay support
[ 71.314278] fbcon: inteldrmfb (fb0) is primary device
[ 71.370428] Console: switching to colour frame buffer device 170x48
[ 71.376602] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 71.376606] i915 0000:00:02.0: registered panic notifier
[ 71.376657] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 81.414780] xor: automatically using best checksumming function:
[ 81.452006] pIII_sse : 5780.000 MB/sec
[ 81.462230] device-mapper: dm-raid45: initialized v0.2594b
[ 82.203377] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 82.217983] ISO 9660 Extensions: RRIP_1991A
[ 82.655982] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 131.040182] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 131.761365] udevd[1111]: starting version 175
[ 134.704042] init: avahi-cups-reload main process (1150) terminated with status 1
[ 135.121892] microcode: CPU0 sig=0x6fd, pf=0x1, revision=0xa3
[ 135.162470] lp: driver loaded but no devices found
[ 135.167111] Bluetooth: Core ver 2.16
[ 135.167174] NET: Registered protocol family 31
[ 135.167177] Bluetooth: HCI device and connection manager initialized
[ 135.167187] Bluetooth: HCI socket layer initialized
[ 135.167192] Bluetooth: L2CAP socket layer initialized
[ 135.167202] Bluetooth: SCO socket layer initialized
[ 136.038669] Bluetooth: RFCOMM TTY layer initialized
[ 136.038692] Bluetooth: RFCOMM socket layer initialized
[ 136.038695] Bluetooth: RFCOMM ver 1.11
[ 136.059898] intel_rng: FWH not detected
[ 137.710747] ppdev: user-space parallel port driver
[ 137.740072] microcode: CPU1 sig=0x6fd, pf=0x1, revision=0xa3
[ 137.753131] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[ 138.139774] psmouse serio1: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64
[ 138.385134] parport_pc 00:08: reported by Plug and Play ACPI
[ 138.385192] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 138.480199] lp0: using parport0 (interrupt-driven).
[ 138.840033] psmouse serio1: Failed to enable mouse on isa0060/serio1
[ 139.022137] ACPI Warning: 0x00000428-0x0000042f SystemIO conflicts with Region \PM2S 1 (20121018/utaddress-251)
[ 139.022149] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 139.022155] ACPI Warning: 0x000004b0-0x000004bf SystemIO conflicts with Region \GPO2 1 (20121018/utaddress-251)
[ 139.022161] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 139.022164] ACPI Warning: 0x00000480-0x000004af SystemIO conflicts with Region \GPO_ 1 (20121018/utaddress-251)
[ 139.022170] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 139.022173] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 139.480556] coretemp coretemp.0: Using relative temperature scale!
[ 139.480584] coretemp coretemp.0: Using relative temperature scale!
[ 139.615313] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input3
sudo fdisk -l 没有列出任何内容
答案1
Ubuntu 无法很好地处理 Windows 创建的动态磁盘卷，并且大多数时候无法检测到它们。
在这些磁盘上安装 Ubuntu 的唯一已知解决方案是将它们转换回基本版本或将 Ubuntu 安装在尚未转换的另一个磁盘上。
有关将磁盘转换为基本卷所需的工具和步骤的更多信息这里。
答案2
驱动器或控制器出现问题，因为它们无法正确重置和初始化。
答案3
问题可能出在分区表上，但由于 Windows 运行正常，因此出现这种情况的可能性很小。
我猜你在 Windows 中将 HDD 用作“动态磁盘”。最佳（可能也是唯一合理的）解决方案是：
- 将所有驱动器备份到另一块硬盘（基本）。如果需要，请联系朋友（或敌人）。[您也可以启动 Windows 并将驱动器 1 分区中的所有数据复制到驱动器 2 的分区。然后在安装 Ubuntu 时断开驱动器 2 的连接。]
- 现在启动 Windows，并将驱动器转换为基本驱动器（如果将其备份到第三个驱动器，则转换两个驱动器；如果备份在驱动器 2 上，则仅转换驱动器 1）。
- 删除驱动器上的所有分区（以确保万无一失）。
- 安装 Windows，然后安装 Ubuntu。（如果可以，请避免使用扩展分区，它们过去曾弄乱过我的分区表。）
无法重新安装 Windows？好吧！然后假设 Disk1 已安装 Windows，将 Disk2 的内容复制到 Disk1。并将 Disk2 转换为 Basic。在 Disk2 上安装 Ubuntu。从 BIOS 将 Disk2 设置为默认启动设备。最后一步是执行sudo update-grub
答案4
我的朋友今天也报告了这个问题，Ubuntu 无法检测到分区，而 Windows 安装程序可以检测到。
我告诉他尝试不同的 Linux Live CD 来检查问题是否仍然存在，但他成功使用了可以读取他的分区的 Linux Mint。
因此，您可以下载 Ubuntu 12.04.3(LTS)，并尝试一下，否则您也可以尝试 Linux Mint 看看它是否能检测到您的磁盘。
也许某个地方有一个错误。