我已经有一段时间没有刻录 DVD 了，今天我需要从 3 个不同的 iso 文件刻录 3 张 DVD。2 个非常小（几 KB），一个非常大（8G，双层）。它们都在使用 K3b 在两个不同的 kubuntu 系统上启动几秒钟后失败。小的出现未指定的 I/O 错误，大的出现：
Burned media
DVD+R Dual Layer
Devices
HL-DT-ST DVD+-RW GS40N A100 (/dev/sr0, CD-R, CD-RW, CD-ROM, DVD-ROM, DVD-R, DVD-RW, DVD-R DL, DVD+R, DVD+RW, DVD+R DL) [DVD-ROM, DVD-R Sequential, DVD-R Dual Layer Sequential, DVD-R Dual Layer Jump, DVD-RAM, DVD-RW Restricted Overwrite, DVD-RW Sequential, DVD+RW, DVD+R, DVD+R Dual Layer, CD-ROM, CD-R, CD-RW] [SAO, TAO, RAW, SAO/R96P, SAO/R96R, RAW/R16, RAW/R96P, RAW/R96R, Restricted Overwrite, Layer Jump] [%7]
System
K3b Version: 2.0.2 KDE Version: 4.13.3 QT Version: 4.8.6 Kernel: 3.13.0-35-generic
Used versions
growisofs: 7.1
growisofs
Executing 'builtin_dd if=/dev/fd/0 of=/dev/sr0 obs=32k seek=0' /dev/sr0: splitting layers at 1987888 blocks /dev/sr0: "Current Write Speed" is 4.1x1352KBps.
0/8142389248 ( 0.0%) @0x, remaining ??:?? RBU 100.0% UBU 0.0%
=== last message repeated 18 times. === :-[ WRITE@LBA=0h failed with SK=0h/ASC=00h/ACQ=03h]: Input/output error :-( write failed: Input/output error
growisofs command:
/usr/bin/growisofs -Z /dev/sr0=/dev/fd/0 -use-the-force-luke=notray -use-the-force-luke=tty -use-the-force-luke=4gms -use-the-force-luke=tracksize:3975776 -use-the-force-luke=dao:3975776 -dvd-compat -speed=6 -use-the-force-luke=bufsize:32m
这是我的最后一张双层 DVD……
也许我应该从 dmesg 添加以下内容：
warning: `growisofs' uses 32-bit capabilities (legacy support in use)
ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
CDB:
Write(10): 2a 00 00 00 00 00 00 00 10 00
ata4.00: cmd a0/01:00:00:00:80/00:00:00:00:00/a0 tag 30 dma 32768 out
res 40/00:03:00:00:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
ata4.00: status: { DRDY }
ata4: hard resetting link
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata4.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata4.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata4.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
ata4.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata4.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata4.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata4.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
ata4.00: configured for UDMA/100
ata4: EH complete
ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
CDB:
Start/Stop Unit: 1b 00 00 00 02 00
ata4.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 16
res 40/00:03:00:00:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
ata4.00: status: { DRDY }
ata4: hard resetting link
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata4.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata4.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata4.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
ata4.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata4.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata4.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata4.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
ata4.00: configured for UDMA/100
ata4: EH complete
答案1
异常 Emask 0x0 SAct 0x0 SErr 0x0 操作 0x6 冻结
这表明驱动器的 SATA 连接存在硬件问题。
传统上，人们会建议检查电缆和电源。但我在网上看到一些痕迹，其他硬件（例如网络）损坏也可能导致这种情况： https://bbs.archlinux.org/viewtopic.php?pid=1052099#p1052099
（将上述错误信息输入 Google 中，您会看到很多不同的报告，其中对原因有不同的解释。）
祝你今天过得愉快 ：）
托马斯