![HP M6-1045DX 上 F12 wifi 键不起作用](https://linux22.com/image/862255/HP%20M6-1045DX%20%E4%B8%8A%20F12%20wifi%20%E9%94%AE%E4%B8%8D%E8%B5%B7%E4%BD%9C%E7%94%A8.png)
我已经搜索了几个小时并尝试了多种建议但都无济于事,除了编辑iwlwifi.conf
和添加“额外选项”之外,我不确定该部分是否适用于我的设置。
好的,这是我所拥有的:
的结果lspci -v
:
02:00.0 Network controller: Intel Corporation Centrino Wireless-N 2230 (rev c4)
Subsystem: Intel Corporation Centrino Wireless-N 2230 BGN
Flags: bus master, fast devsel, latency 0, IRQ 45
Memory at 50500000 (64-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: iwlwifi
的结果sudo lshw -C network
:
*-network DISABLED
description: Wireless interface
product: Centrino Wireless-N 2230
vendor: Intel Corporation
physical id: 0
bus info: pci@0000:02:00.0
logical name: wlan0
version: c4
serial: 68:5d:43:d6:e2:9b
width: 64 bits
clock: 33MHz
capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless
configuration: broadcast=yes driver=iwlwifi driverversion=3.16.3-031603-generic firmware=18.168.6.1 latency=0 link=no multicast=yes wireless=IEEE 802.11bgn
resources: irq:45 memory:50500000-50501fff
的结果rfkill list all
:
0: phy0: Wireless LAN
Soft blocked: no
Hard blocked: yes
似乎rfkill unblock all
什么也没做。
更新:启动 Windows 并在其中启用它可以解决问题,但这似乎不是解决根本原因的永久解决方案。