我有一台较旧的 HP p6570y 塔式机，目前运行 Ubuntu Server 16.04 并用作 PleX 服务器。我买了一个 hauppauge WinTV-quadHD PCI 卡，这样我就可以开始流式传输和录制 OTA 广播。
当我插入卡时，它会导致机器停止连接到网络。我运行时通常会看到 3 种类型的网络接口ifconfig：enp3so、lo和virbr0。当我插入新卡时，它会引发错误，因为它正在启动并运行所有与无法建立网络接口有关的通过/失败。ifconfig将仅显示lo和virbr0作为连接。
我已经完成了位于此处的卡的安装：http://www.hauppauge.com/site/support/linux.html并且没有任何问题。
有没有其他人遇到过这个问题并找到了好的解决办法？我也给他们的技术支持发了一封电子邮件，但我怀疑周一之前不会有任何消息。
谢谢
编辑 1：唯一的 FAIL 行内容如下：
[Failed] Failed to start Raise network interfaces.
ifconfig仍然会导致与上述相同的情况。看起来新卡槽被占用导致以太网连接被拒绝。我猜也许 BIOS 将电视调谐器卡称为网卡？奇怪...
lspci未安装卡时运行命令的输出：
00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD] RS880 Host Bridge
00:01.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] RS780/RS880 PCI to PCI bridge (int gfx)
00:05.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] RS780/RS880 PCI to PCI bridge (PCIE port 1)
00:0a.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] RS780/RS880 PCI to PCI bridge (PCIE port 5)
00:11.0 RAID bus controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 SATA Controller [Non-RAID5 mode]
00:12.0 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
00:12.1 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0 USB OHCI1 Controller
00:12.2 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller
00:13.0 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
00:13.1 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0 USB OHCI1 Controller
00:13.2 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller
00:14.0 SMBus: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 SMBus Controller (rev 3c)
00:14.2 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 Azalia (Intel HDA)
00:14.3 ISA bridge: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 LPC host controller
00:14.4 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 PCI to PCI Bridge
00:14.5 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI2 Controller
00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor HyperTransport Configuration
00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Address Map
00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Miscellaneous Control
00:18.4 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Link Control
01:05.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] RS880 [Radeon HD 4200]
02:00.0 Network controller: Ralink corp. RT3090 Wireless 802.11n 1T/1R PCIe
03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 03)
04:06.0 FireWire (IEEE 1394): VIA Technologies, Inc. VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI Controller (rev c0)
安装该卡后我看到的唯一区别是：
00:07.0 - PCIE 端口 3 - 线路与 1/5 相同
列表到 02:00.0 保持不变，从那时起变化如下：
03:00 PCI Bridge Device 2304
04:01.0 Same
04:02.0 Same
05:00.0 Multimedia video controller: Conexant Systems, Inc. CX23887/8 PCIe Broadcast Audio and Video Decoder with 3D Comb (rev 04)
06:00.0 Same as 05
07:00.0 Ethernet Controller: same as 03 from without card installed
08:06.0 Firewire, same as 04 from pre-install
所以安装的网卡会导致它先于我的以太网卡被寻址吗？那么这是否意味着无论出于什么原因，它当时甚至没有寻找网卡？