我的以太网电缆不再被识别,无论是在网络(工作还是家庭)上。
ifconfig
enp0s31f6: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500
ether 54:e1:ad:b5:f1:63 txqueuelen 1000 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
device interrupt 16 memory 0xec200000-ec220000
lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
inet 127.0.0.1 netmask 255.0.0.0
inet6 ::1 prefixlen 128 scopeid 0x10<host>
loop txqueuelen 1000 (Local Loopback)
RX packets 6261 bytes 596363 (596.3 KB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 6261 bytes 596363 (596.3 KB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
wlp4s0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 10.111.35.119 netmask 255.255.252.0 broadcast 10.111.35.255
inet6 fe80::ba41:664a:2235:d79a prefixlen 64 scopeid 0x20<link>
inet6 2001:700:200:f132:525b:e148:8c18:17d3 prefixlen 64 scopeid 0x0<global>
inet6 2001:700:200:f132::13bb prefixlen 128 scopeid 0x0<global>
inet6 2001:700:200:f133:356d:2dde:4ce:2297 prefixlen 64 scopeid 0x0<global>
ether bc:a8:a6:9a:c7:84 txqueuelen 1000 (Ethernet)
RX packets 106167 bytes 123265102 (123.2 MB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 26746 bytes 6175687 (6.1 MB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
我已经尝试摆弄sudo vi 10-globally-managed-devices.conf
sudo service network-manager restart
的内容sudo vi /etc/network/interfaces
是
iface enp0s31f6 inet loopback
尝试sudo ifdown enp0s31f6
过sudo ifup enp0s31f6
答案1
the content of the sudo vi /etc/network/interfaces is iface enp0s31f6 inet loopback
请将文件更改为:
auto lo
iface lo inet loopback
重新启动并告诉我们是否有任何改进。