我在 ubuntu 服务器上有两个接口无线网络连接到 netgear 路由器,它是 NAT 有线接口 01 接口连接到 L2 交换机其他有线接口连接到防火墙当我连接到无线网络时,我可以通过 NAT 网络通过 RDP 连接到 ubuntu 服务器,我无法通过 RDP 连接到有线网络接口
ubuntu@OptiPlex-3050-02:~$ ip a s
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group defaul t qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: enp1s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP gr oup default qlen 1000
link/ether b8:85:84:ad:a9:9d brd ff:ff:ff:ff:ff:ff
inet 192.168.51.6/24 brd 192.168.51.255 scope global noprefixroute enp1s0
valid_lft forever preferred_lft forever
inet6 fe80::ba85:84ff:fead:a99d/64 scope link
valid_lft forever preferred_lft forever
3: wlp2s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP gro up default qlen 1000
link/ether 14:4f:8a:ae:ea:4d brd ff:ff:ff:ff:ff:ff
inet 192.168.1.20/24 brd 192.168.1.255 scope global dynamic noprefixroute wl p2s0
valid_lft 85039sec preferred_lft 85039sec
inet6 fe80::98eb:10dd:9545:342e/64 scope link noprefixroute
valid_lft forever preferred_lft forever
4: enxe00000101db5: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel st ate UP group default qlen 1000
link/ether e0:00:00:10:1d:b5 brd ff:ff:ff:ff:ff:ff
inet 192.168.253.210/24 brd 192.168.253.255 scope global noprefixroute enxe0 0000101db5
valid_lft forever preferred_lft forever
inet6 fe80::e200:ff:fe10:1db5/64 scope link
valid_lft forever preferred_lft forever
ubuntu@OptiPlex-3050-02:~$