![SATA 热插拔不工作](https://linux22.com/image/112714/SATA%20%E7%83%AD%E6%8F%92%E6%8B%94%E4%B8%8D%E5%B7%A5%E4%BD%9C.png)
您能帮我理解为什么我的 SATA 热插拔不工作吗?当我插入SATA磁盘时,lsblk
没有变化。只有我的系统盘/dev/sda
。
我有Linux:
$ uname -a
Linux Z170-D3H 4.9.0-3-amd64 #1 SMP Debian 4.9.25-1 (2017-05-02) x86_64 GNU/Linux
内核设置:
$ cat /boot/config-4.9.0-3-amd64 | $ cat /boot/config-4.9.0-3-amd64 | grep 热插拔
CONFIG_MEMORY_HOTPLUG=y
CONFIG_MEMORY_HOTPLUG_SPARSE=y
# CONFIG_MEMORY_HOTPLUG_DEFAULT_ONLINE is not set
CONFIG_HOTPLUG_CPU=y
# CONFIG_BOOTPARAM_HOTPLUG_CPU0 is not set
# CONFIG_DEBUG_HOTPLUG_CPU0 is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ACPI_HOTPLUG_CPU=y
CONFIG_ACPI_HOTPLUG_MEMORY=y
CONFIG_ACPI_HOTPLUG_IOAPIC=y
CONFIG_HOTPLUG_PCI_PCIE=y
CONFIG_HOTPLUG_PCI=y
CONFIG_HOTPLUG_PCI_ACPI=y
CONFIG_HOTPLUG_PCI_ACPI_IBM=m
CONFIG_HOTPLUG_PCI_CPCI=y
CONFIG_HOTPLUG_PCI_CPCI_ZT5550=m
CONFIG_HOTPLUG_PCI_CPCI_GENERIC=m
CONFIG_HOTPLUG_PCI_SHPC=m
CONFIG_XEN_BALLOON_MEMORY_HOTPLUG=y
CONFIG_XEN_BALLOON_MEMORY_HOTPLUG_LIMIT=512
# CONFIG_CPU_HOTPLUG_STATE_CONTROL is not set
$ cat /boot/config-4.9.0-3-amd64 | $ cat /boot/config-4.9.0-3-amd64 | grep SATA
CONFIG_SATA_ZPODD=y
CONFIG_SATA_PMP=y
CONFIG_SATA_AHCI=m
# CONFIG_SATA_AHCI_PLATFORM is not set
# CONFIG_SATA_INIC162X is not set
CONFIG_SATA_ACARD_AHCI=m
CONFIG_SATA_SIL24=m
CONFIG_SATA_QSTOR=m
CONFIG_SATA_SX4=m
# SATA SFF controllers with BMDMA
# CONFIG_SATA_DWC is not set
CONFIG_SATA_MV=m
CONFIG_SATA_NV=m
CONFIG_SATA_PROMISE=m
CONFIG_SATA_SIL=m
CONFIG_SATA_SIS=m
CONFIG_SATA_SVW=m
CONFIG_SATA_ULI=m
CONFIG_SATA_VIA=m
CONFIG_SATA_VITESSE=m
$ cat /boot/config-4.9.0-3-amd64 | $ cat /boot/config-4.9.0-3-amd64 | grep AHCI
CONFIG_SATA_AHCI=m
# CONFIG_SATA_AHCI_PLATFORM is not set
CONFIG_SATA_ACARD_AHCI=m
SATA 控制器:
$ lspci | grep SATA
00:17.0 SATA controller: Intel Corporation Sunrise Point-H SATA controller [AHCI mode] (rev 31)
答案1
问题出在 BIOS 配置错误。
解决方案(适用于我的主板 Z170-D3H)是去BIOS>周边设备>SATA配置并在这里启用热插拔每个 SATA 端口的选项。然后保存设置并重新启动计算机。
现在一切正常!