我已经重新编译了内核，发现它无法启动到第二阶段，因为 initramfs 中没有 scsi 驱动程序。
我发现我需要在 /etc/initramfs-tools/modules 文件中添加条目，但要添加什么呢？支持的模块名称是什么？我尝试了很多方法，但都没有成功。
任何想法？
root@nature-Inspiron-3558:/home/nature# for i in $(lspci | grep SATA | sed -e 's/\ .*$//g'); do lspci -v -s $i; done
00:1f.2 SATA controller: Intel Corporation Wildcat Point-LP SATA Controller [AHCI Mode] (rev 03) (prog-if 01 [AHCI 1.0])
Subsystem: Dell Device 06b0
Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 60
I/O ports at 40b0 [size=8]
I/O ports at 40a0 [size=4]
I/O ports at 4090 [size=8]
I/O ports at 4080 [size=4]
I/O ports at 4060 [size=32]
Memory at a9219000 (32-bit, non-prefetchable) [size=2K]
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Capabilities: [70] Power Management version 3
Capabilities: [a8] SATA HBA v1.0
Kernel driver in use: ahci