如何管理执行自动检查的突袭设备？

Question

我已经设置了 RAID6，它会不时地进行检查，而在检查过程中，我似乎无法写入整个阵列。

细节：

Personalities : [raid6] [raid5] [raid4] [linear] [multipath] [raid0] [raid1] [raid10]
md0 : active raid6 sda1[0] sdh1[7] sdf1[5] sdc1[2] sdb1[1] sdd1[3] sde1[4] sdg1[6]
      93754475520 blocks super 1.2 level 6, 512k chunk, algorithm 2 [8/8] [UUUUUUUU]
      [================>....]  check = 82.8% <REDACTED> finish=278.4min speed=160704K/sec
      bitmap: 0/117 pages [0KB], 65536KB chunk

输出如下：

$ sudo mdadm --detail /dev/md0

/dev/md0:
           Version : 1.2
     Creation Time : Mon May  2 22:14:43 2022
        Raid Level : raid6
        Array Size : <REDACTED>
     Used Dev Size : <REDACTED>
      Raid Devices : 8
     Total Devices : 8
       Persistence : Superblock is persistent

     Intent Bitmap : Internal

       Update Time : Tue Nov 14 17:28:03 2023
             State : clean, checking
    Active Devices : 8
   Working Devices : 8
    Failed Devices : 0
     Spare Devices : 0

            Layout : left-symmetric
        Chunk Size : 512K

Consistency Policy : bitmap

      Check Status : 83% complete

              Name : <REDACTED>
              UUID : <REDACTED>
            Events : 189274

    Number   Major   Minor   RaidDevice State
       0       8        1        0      active sync   /dev/sda1
       1       8       17        1      active sync   /dev/sdb1
       2       8       33        2      active sync   /dev/sdc1
       3       8       49        3      active sync   /dev/sdd1
       4       8       65        4      active sync   /dev/sde1
       5       8       81        5      active sync   /dev/sdf1
       6       8       97        6      active sync   /dev/sdg1
       7       8      113        7      active sync   /dev/sdh1

这会导致机器在检查期间无法使用。我想避免这种情况，但不知道如何避免。我发现的所有结果都说让它完成就行了。

我希望达到这样的情况：阵列不会一次性连续数小时无法使用。