这是我在 Fedora 16 中的安装日志：
The VMware Host-Guest Filesystem allows for shared folders between the host OS
and the guest OS in a Fusion or Workstation virtual environment. Do you wish
to enable this feature? [yes]
Using 2.6.x kernel build system.
make: Entering directory `/tmp/modconfig-8X1GaP/vmci-only'
/usr/bin/make -C /lib/modules/3.6.11-4.fc16.x86_64/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. \
MODULEBUILDDIR= modules
make[1]: Entering directory `/usr/src/kernels/3.6.11-4.fc16.x86_64'
CC [M] /tmp/modconfig-8X1GaP/vmci-only/linux/driver.o
CC [M] /tmp/modconfig-8X1GaP/vmci-only/linux/vmciKernelIf.o
CC [M] /tmp/modconfig-8X1GaP/vmci-only/common/vmciDriver.o
CC [M] /tmp/modconfig-8X1GaP/vmci-only/common/vmciResource.o
CC [M] /tmp/modconfig-8X1GaP/vmci-only/common/vmciRoute.o
CC [M] /tmp/modconfig-8X1GaP/vmci-only/common/vmciContext.o
CC [M] /tmp/modconfig-8X1GaP/vmci-only/common/vmciDatagram.o
CC [M] /tmp/modconfig-8X1GaP/vmci-only/common/vmciHashtable.o
CC [M] /tmp/modconfig-8X1GaP/vmci-only/common/vmciEvent.o
CC [M] /tmp/modconfig-8X1GaP/vmci-only/common/vmciQueuePair.o
CC [M] /tmp/modconfig-8X1GaP/vmci-only/common/vmciQPair.o
CC [M] /tmp/modconfig-8X1GaP/vmci-only/common/vmciDoorbell.o
CC [M] /tmp/modconfig-8X1GaP/vmci-only/driverLog.o
LD [M] /tmp/modconfig-8X1GaP/vmci-only/vmci.o
Building modules, stage 2.
MODPOST 1 modules
CC /tmp/modconfig-8X1GaP/vmci-only/vmci.mod.o
LD [M] /tmp/modconfig-8X1GaP/vmci-only/vmci.ko
make[1]: Leaving directory `/usr/src/kernels/3.6.11-4.fc16.x86_64'
/usr/bin/make -C $PWD SRCROOT=$PWD/. \
MODULEBUILDDIR= postbuild
make[1]: Entering directory `/tmp/modconfig-8X1GaP/vmci-only'
make[1]: `postbuild' is up to date.
make[1]: Leaving directory `/tmp/modconfig-8X1GaP/vmci-only'
cp -f vmci.ko ./../vmci.o
make: Leaving directory `/tmp/modconfig-8X1GaP/vmci-only'
Using 2.6.x kernel build system.
make: Entering directory `/tmp/modconfig-8X1GaP/vmhgfs-only'
/usr/bin/make -C /lib/modules/3.6.11-4.fc16.x86_64/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. \
MODULEBUILDDIR= modules
make[1]: Entering directory `/usr/src/kernels/3.6.11-4.fc16.x86_64'
CC [M] /tmp/modconfig-8X1GaP/vmhgfs-only/message.o
CC [M] /tmp/modconfig-8X1GaP/vmhgfs-only/rpcout.o
CC [M] /tmp/modconfig-8X1GaP/vmhgfs-only/filesystem.o
CC [M] /tmp/modconfig-8X1GaP/vmhgfs-only/cpName.o
CC [M] /tmp/modconfig-8X1GaP/vmhgfs-only/link.o
CC [M] /tmp/modconfig-8X1GaP/vmhgfs-only/request.o
CC [M] /tmp/modconfig-8X1GaP/vmhgfs-only/stubs.o
CC [M] /tmp/modconfig-8X1GaP/vmhgfs-only/hgfsUtil.o
CC [M] /tmp/modconfig-8X1GaP/vmhgfs-only/tcp.o
CC [M] /tmp/modconfig-8X1GaP/vmhgfs-only/hgfsEscape.o
CC [M] /tmp/modconfig-8X1GaP/vmhgfs-only/file.o
CC [M] /tmp/modconfig-8X1GaP/vmhgfs-only/bdhandler.o
CC [M] /tmp/modconfig-8X1GaP/vmhgfs-only/transport.o
CC [M] /tmp/modconfig-8X1GaP/vmhgfs-only/inode.o
/tmp/modconfig-8X1GaP/vmhgfs-only/inode.c: In function ‘HgfsPermission’:
/tmp/modconfig-8X1GaP/vmhgfs-only/inode.c:1755:8: warning: ‘dentry’ may be used uninitialized in this function [-Wuninitialized]
/tmp/modconfig-8X1GaP/vmhgfs-only/inode.c:1813:22: note: ‘dentry’ was declared here
CC [M] /tmp/modconfig-8X1GaP/vmhgfs-only/super.o
CC [M] /tmp/modconfig-8X1GaP/vmhgfs-only/vmci.o
CC [M] /tmp/modconfig-8X1GaP/vmhgfs-only/dir.o
CC [M] /tmp/modconfig-8X1GaP/vmhgfs-only/fsutil.o
CC [M] /tmp/modconfig-8X1GaP/vmhgfs-only/cpNameLinux.o
CC [M] /tmp/modconfig-8X1GaP/vmhgfs-only/hgfsBd.o
CC [M] /tmp/modconfig-8X1GaP/vmhgfs-only/backdoorGcc64.o
CC [M] /tmp/modconfig-8X1GaP/vmhgfs-only/module.o
CC [M] /tmp/modconfig-8X1GaP/vmhgfs-only/page.o
CC [M] /tmp/modconfig-8X1GaP/vmhgfs-only/backdoor.o
CC [M] /tmp/modconfig-8X1GaP/vmhgfs-only/dentry.o
CC [M] /tmp/modconfig-8X1GaP/vmhgfs-only/cpNameLite.o
CC [M] /tmp/modconfig-8X1GaP/vmhgfs-only/kernelStubsLinux.o
LD [M] /tmp/modconfig-8X1GaP/vmhgfs-only/vmhgfs.o
Building modules, stage 2.
MODPOST 1 modules
CC /tmp/modconfig-8X1GaP/vmhgfs-only/vmhgfs.mod.o
LD [M] /tmp/modconfig-8X1GaP/vmhgfs-only/vmhgfs.ko
make[1]: Leaving directory `/usr/src/kernels/3.6.11-4.fc16.x86_64'
/usr/bin/make -C $PWD SRCROOT=$PWD/. \
MODULEBUILDDIR= postbuild
make[1]: Entering directory `/tmp/modconfig-8X1GaP/vmhgfs-only'
make[1]: `postbuild' is up to date.
make[1]: Leaving directory `/tmp/modconfig-8X1GaP/vmhgfs-only'
cp -f vmhgfs.ko ./../vmhgfs.o
make: Leaving directory `/tmp/modconfig-8X1GaP/vmhgfs-only'
Using 2.6.x kernel build system.
make: Entering directory `/tmp/modconfig-SN1mhC/vmxnet-only'
/usr/bin/make -C /lib/modules/3.6.11-4.fc16.x86_64/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. \
MODULEBUILDDIR= modules
make[1]: Entering directory `/usr/src/kernels/3.6.11-4.fc16.x86_64'
CC [M] /tmp/modconfig-SN1mhC/vmxnet-only/vmxnet.o
Building modules, stage 2.
MODPOST 1 modules
CC /tmp/modconfig-SN1mhC/vmxnet-only/vmxnet.mod.o
LD [M] /tmp/modconfig-SN1mhC/vmxnet-only/vmxnet.ko
make[1]: Leaving directory `/usr/src/kernels/3.6.11-4.fc16.x86_64'
/usr/bin/make -C $PWD SRCROOT=$PWD/. \
MODULEBUILDDIR= postbuild
make[1]: Entering directory `/tmp/modconfig-SN1mhC/vmxnet-only'
make[1]: `postbuild' is up to date.
make[1]: Leaving directory `/tmp/modconfig-SN1mhC/vmxnet-only'
cp -f vmxnet.ko ./../vmxnet.o
make: Leaving directory `/tmp/modconfig-SN1mhC/vmxnet-only'
The vmblock enables dragging or copying files between host and guest in a
Fusion or Workstation virtual environment. Do you wish to enable this feature?
[yes]
!!! [EXPERIMENTAL] !!!
VMware automatic kernel modules enables automatic building and installation of
VMware kernel modules at boot that are not already present. By selecting yes,
you will be enabling this experimental feature. You can always disable this
feature by re-running vmware-config-tools.pl.
Would you like to enable VMware automatic kernel modules?
[no]
Thinprint provides driver-free printing. Do you wish to enable this feature?
[no]
Disabling timer-based audio scheduling in pulseaudio.
Detected X server version 1.11.4
Distribution provided drivers for Xorg X server are used.
Skipping X configuration because X drivers are not included.
Creating a new initrd boot image for the kernel.
Starting Virtual Printing daemon: done
Starting vmware-tools (via systemctl): [ OK ]
The configuration of VMware Tools 9.2.3 build-1031360 for Linux for this
running kernel completed successfully.
请注意，有一个问题“VMware Host-Guest 文件系统允许共享文件夹 [是]”，然后安装 hgfs.ko，然后 vmxnet.ko 安装正常进行。
这是我在 Fedora 18 中得到的日志
The VMware Host-Guest Filesystem allows for shared folders between the host OS
and the guest OS in a Fusion or Workstation virtual environment. Do you wish
to enable this feature? [yes]
Before you can compile modules, you need to have the following installed...
make gcc
kernel headers of the running kernel
Searching for GCC...
Detected GCC binary at "/bin/gcc".
The path "/bin/gcc" appears to be a valid path to the gcc binary.
Would you like to change it? [no]
Searching for a valid kernel header path...
Detected the kernel headers at
"/lib/modules/3.9.4-200.fc18.x86_64/build/include".
The path "/lib/modules/3.9.4-200.fc18.x86_64/build/include" appears to be a
valid path to the 3.9.4-200.fc18.x86_64 kernel headers.
Would you like to change it? [no]
make: Entering directory `/tmp/modconfig-jub19n/vmxnet-only'
/bin/make -C /lib/modules/3.9.4-200.fc18.x86_64/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. \
MODULEBUILDDIR= modules
make[1]: Entering directory `/usr/src/kernels/3.9.4-200.fc18.x86_64'
CC [M] /tmp/modconfig-jub19n/vmxnet-only/vmxnet.o
Building modules, stage 2.
MODPOST 1 modules
CC /tmp/modconfig-jub19n/vmxnet-only/vmxnet.mod.o
LD [M] /tmp/modconfig-jub19n/vmxnet-only/vmxnet.ko
make[1]: Leaving directory `/usr/src/kernels/3.9.4-200.fc18.x86_64'
/bin/make -C $PWD SRCROOT=$PWD/. \
MODULEBUILDDIR= postbuild
make[1]: Entering directory `/tmp/modconfig-jub19n/vmxnet-only'
make[1]: `postbuild' is up to date.
make[1]: Leaving directory `/tmp/modconfig-jub19n/vmxnet-only'
cp -f vmxnet.ko ./../vmxnet.o
make: Leaving directory `/tmp/modconfig-jub19n/vmxnet-only'
The vmblock enables dragging or copying files between host and guest in a
Fusion or Workstation virtual environment. Do you wish to enable this feature?
[yes]
!!! [EXPERIMENTAL] !!!
VMware automatic kernel modules enables automatic building and installation of
VMware kernel modules at boot that are not already present. By selecting yes,
you will be enabling this experimental feature. You can always disable this
feature by re-running vmware-config-tools.pl.
Would you like to enable VMware automatic kernel modules?
[no]
Thinprint provides driver-free printing. Do you wish to enable this feature?
[no]
Disabling timer-based audio scheduling in pulseaudio.
Detected X server version 1.13.3
Distribution provided drivers for Xorg X server are used.
Skipping X configuration because X drivers are not included.
Creating a new initrd boot image for the kernel.
Starting Virtual Printing daemon: done
Starting vmware-tools (via systemctl): [ OK ]
The configuration of VMware Tools 9.2.3 build-1031360 for Linux for this
running kernel completed successfully.
我也试过open-vm-tools 收件人。 但，
[root@localhost Documents]# mount -t vmhgfs .host:/ /mnt/hgfs
Error: cannot mount filesystem: No such device
我不知道 vm-tools 支持站点在哪里。
更新
我已经检查过，vmxnet3 已安装configure_module('vmxnet3')在vmware-config-tools.pl。它无法到达，configure_module('vmhgfs')因为
# vmhgfs now depends on vmci. Check to ensure it's configured.
if (defined(db_get_answer_if_exists('VMCI_CONFED')) &&
db_get_answer('VMCI_CONFED') ne 'yes') {
return 1;
}
默默地“保护”电话免受我们的需求。我可以说，db_get_answer_if_exists('VMCI_CONFED')) = 1, db_get_answer('VMCI_CONFED') = 'no'并警告
模块 vmci 已由另一个安装程序或软件包安装在该系统上，并且不会被此安装程序修改。使用标志 --clobber-kernel-modules=vmci 进行覆盖。
在上面的日志中。
答案1
使用 vmci 覆盖标志启动vmware-config-tools.pl，
vmware-config-tools.pl --clobber-kernel-modules=vmci
问题已经解决。现在，我又得到了另一个
/modconfig-o4Yd7O/vmhgfs-only/inode.c: In function ‘HgfsTruncatePages’:
/tmp/modconfig-o4Yd7O/vmhgfs-only/inode.c:888:4: error: implicit declaration of function ‘vmtruncate’
错误。但是，这是另一个问题，我看到了它（不过，我也在此补丁）。