我想在基于 beaglebone 的定制板上设置 ntp。
/etc/ntp.conf文件内容如下
driftfile /var/run/ntp.drift
server pool.ntp.org
server 1.in.pool.ntp.org
server 1.asia.pool.ntp.org
server 2.asia.pool.ntp.org
# By default, exchange time with everybody, but don't allow configuration.
#restrict -4 default kod notrap nomodify nopeer noquery
#restrict -6 default kod notrap nomodify nopeer noquery
# Local users may interrogate the ntp server more closely.
restrict 127.0.0.1
#restrict ::1
当我运行命令时ntpdate -d 77.235.14.49
我得到以下输出
5 Feb 17:07:42 ntpdate[429]: ntpdate [email protected] Thu Jan 23 08:13:41 UTC 2014 (1)
Looking for host 77.235.14.49 and service ntp
host found : 77.235.14.49
transmit(77.235.14.49)
transmit(77.235.14.49)
transmit(77.235.14.49)
transmit(77.235.14.49)
transmit(77.235.14.49)
77.235.14.49: Server dropped: no data
server 77.235.14.49, port 123
stratum 0, precision 0, leap 00, trust 000
refid [77.235.14.49], delay 0.00000, dispersion 64.00000
transmitted 4, in filter 4
reference time: 00000000.00000000 Thu, Feb 7 2036 11:58:16.000
originate timestamp: 00000000.00000000 Thu, Feb 7 2036 11:58:16.000
transmit timestamp: d69ca10c.1f050e72 Wed, Feb 5 2014 17:07:48.121
filter delay: 0.00000 0.00000 0.00000 0.00000
0.00000 0.00000 0.00000 0.00000
filter offset: 0.000000 0.000000 0.000000 0.000000
0.000000 0.000000 0.000000 0.000000
delay 0.00000, dispersion 64.00000
offset 0.000000
5 Feb 17:07:50 ntpdate[429]: no server suitable for synchronization found
当我 ping 同一个 IP 时,一切正常
ping 77.235.14.49
PING 77.235.14.49 (77.235.14.49): 56 data bytes
64 bytes from 77.235.14.49: seq=0 ttl=47 time=268.123 ms
64 bytes from 77.235.14.49: seq=1 ttl=48 time=262.530 ms
64 bytes from 77.235.14.49: seq=2 ttl=48 time=263.236 ms
64 bytes from 77.235.14.49: seq=3 ttl=47 time=266.751 ms
64 bytes from 77.235.14.49: seq=4 ttl=48 time=262.649 ms
64 bytes from 77.235.14.49: seq=5 ttl=48 time=262.303 ms
64 bytes from 77.235.14.49: seq=6 ttl=48 time=262.409 ms
^C
--- 77.235.14.49 ping statistics ---
7 packets transmitted, 7 packets received, 0% packet loss
round-trip min/avg/max = 262.303/264.000/268.123 ms
我参考了 QA 网站上的某些问题,他们谈到了防火墙,我不知道如何在嵌入式 Linux 板中进行这些(防火墙或相关)更改?
主板已连接到组织的 LAN,并通过 dhcp 获取 ip。代理方面是否存在问题。
如果需要,我可以在 Board 的哪里放置代理设置?
答案1
尝试使用 cntlm 进行代理身份验证。有关更多信息,请参阅:http://cntlm.sourceforge.net/