我有 2 台电脑，一台是 Windows 10 台式机，另一台是 Windows 7 戴尔笔记本电脑。两台电脑都配有英特尔千兆网络接口。互联网是对称千兆的。在台式机上，我测量500/900 左右的速度，相当稳定。在笔记本电脑上我得到大约 900/700。我希望在台式机上获得 900/900 左右的速度，我对笔记本电脑的速度很满意。这种情况让我假设连接本身没有问题，因为它会得到 900/900+，但网络接口或其设置遇到了瓶颈。
在安全模式下运行良好！
我试过：
- 切换电缆
- 更改光网络终端上的连接端口
- 在接口高级选项中将自动协商设置为 1gbps 全双工
- 关闭流量控制和节能功能
- 更新 Windows 10
- 重新启动 ONT 和计算机
- 测试服务器由 ISP 提供，在 speedtest.net 上（始终使用同一个服务器，具有“多”连接模式）
- 网络/计算机上没有运行任何其他程序
- 所有设备都通过 Cat5e 电缆直接连接到 ISP 设备
我该如何解决这个问题？我还能尝试什么？还有什么信息有用？
iPerf3 按要求进行测试
这些都是通过 ISP 设备传输的，我并没有直接连接这两台机器。
台式机为客户端，笔记本电脑为服务器：
iperf3 -c 192.168.1.12 -n 2048M -l 32K
Connecting to host 192.168.1.12, port 5201
[ 4] local 192.168.1.13 port 5791 connected to 192.168.1.12 port 5201
[ ID] Interval Transfer Bandwidth
[ 4] 0.00-1.00 sec 112 MBytes 938 Mbits/sec
[ 4] 1.00-2.00 sec 112 MBytes 936 Mbits/sec
[ 4] 2.00-3.00 sec 112 MBytes 938 Mbits/sec
[ 4] 3.00-4.00 sec 112 MBytes 939 Mbits/sec
[ 4] 4.00-5.00 sec 112 MBytes 939 Mbits/sec
[ 4] 5.00-6.00 sec 112 MBytes 939 Mbits/sec
[ 4] 6.00-7.00 sec 112 MBytes 941 Mbits/sec
[ 4] 7.00-8.00 sec 112 MBytes 939 Mbits/sec
[ 4] 8.00-9.00 sec 112 MBytes 939 Mbits/sec
[ 4] 9.00-10.00 sec 112 MBytes 939 Mbits/sec
[ 4] 10.00-11.00 sec 112 MBytes 941 Mbits/sec
[ 4] 11.00-12.00 sec 111 MBytes 934 Mbits/sec
[ 4] 12.00-13.00 sec 112 MBytes 940 Mbits/sec
[ 4] 13.00-14.00 sec 112 MBytes 939 Mbits/sec
[ 4] 14.00-15.00 sec 112 MBytes 940 Mbits/sec
[ 4] 15.00-16.00 sec 112 MBytes 940 Mbits/sec
[ 4] 16.00-17.00 sec 112 MBytes 938 Mbits/sec
[ 4] 17.00-18.00 sec 111 MBytes 934 Mbits/sec
[ 4] 18.00-18.31 sec 34.1 MBytes 931 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bandwidth
[ 4] 0.00-18.31 sec 2.00 GBytes 938 Mbits/sec sender
[ 4] 0.00-18.31 sec 2.00 GBytes 938 Mbits/sec receiver
iperf Done.
笔记本电脑是客户端，台式机是服务器：
-----------------------------------------------------------
Server listening on 5201
-----------------------------------------------------------
Accepted connection from 192.168.1.12, port 49553
[ 5] local 192.168.1.13 port 5201 connected to 192.168.1.12 port 49554
[ ID] Interval Transfer Bandwidth
[ 5] 0.00-1.00 sec 41.8 MBytes 351 Mbits/sec
[ 5] 1.00-2.00 sec 58.6 MBytes 492 Mbits/sec
[ 5] 2.00-3.00 sec 59.3 MBytes 498 Mbits/sec
[ 5] 3.00-4.00 sec 62.6 MBytes 525 Mbits/sec
[ 5] 4.00-5.00 sec 62.5 MBytes 525 Mbits/sec
[ 5] 5.00-6.00 sec 59.5 MBytes 499 Mbits/sec
[ 5] 6.00-7.00 sec 62.1 MBytes 521 Mbits/sec
[ 5] 7.00-8.00 sec 64.1 MBytes 537 Mbits/sec
[ 5] 8.00-9.00 sec 59.3 MBytes 498 Mbits/sec
[ 5] 9.00-10.00 sec 59.9 MBytes 503 Mbits/sec
[ 5] 10.00-11.00 sec 60.8 MBytes 510 Mbits/sec
[ 5] 11.00-12.00 sec 64.0 MBytes 537 Mbits/sec
[ 5] 12.00-13.00 sec 60.9 MBytes 511 Mbits/sec
[ 5] 13.00-14.00 sec 59.6 MBytes 500 Mbits/sec
[ 5] 14.00-15.00 sec 59.1 MBytes 496 Mbits/sec
[ 5] 15.00-16.00 sec 61.3 MBytes 514 Mbits/sec
[ 5] 16.00-17.00 sec 61.2 MBytes 513 Mbits/sec
[ 5] 17.00-18.00 sec 59.8 MBytes 502 Mbits/sec
[ 5] 18.00-19.00 sec 60.2 MBytes 505 Mbits/sec
[ 5] 19.00-20.00 sec 59.6 MBytes 500 Mbits/sec
[ 5] 20.00-21.00 sec 59.7 MBytes 501 Mbits/sec
[ 5] 21.00-22.00 sec 60.2 MBytes 505 Mbits/sec
[ 5] 22.00-23.00 sec 59.9 MBytes 503 Mbits/sec
[ 5] 23.00-24.00 sec 60.6 MBytes 509 Mbits/sec
[ 5] 24.00-25.00 sec 62.6 MBytes 525 Mbits/sec
[ 5] 25.00-26.00 sec 62.3 MBytes 522 Mbits/sec
[ 5] 26.00-27.00 sec 60.1 MBytes 505 Mbits/sec
[ 5] 27.00-28.00 sec 59.6 MBytes 500 Mbits/sec
[ 5] 28.00-29.00 sec 60.2 MBytes 505 Mbits/sec
[ 5] 29.00-30.00 sec 61.3 MBytes 514 Mbits/sec
[ 5] 30.00-31.00 sec 61.2 MBytes 513 Mbits/sec
[ 5] 31.00-32.00 sec 60.4 MBytes 507 Mbits/sec
[ 5] 32.00-33.00 sec 60.6 MBytes 508 Mbits/sec
[ 5] 33.00-34.00 sec 59.9 MBytes 502 Mbits/sec
[ 5] 34.00-34.05 sec 3.04 MBytes 520 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bandwidth
[ 5] 0.00-34.05 sec 0.00 Bytes 0.00 bits/sec sender
[ 5] 0.00-34.05 sec 2.00 GBytes 505 Mbits/sec receiver
答案1
这是基于软件的。选择此选项时，Networx 软件会导致此问题 -.- 现在我测量到 ~950/950 并且非常满意。
