我使用 Parrot OS 双启动了 Mac。我的无线连接非常好,但无法识别以太网。当我安装系统时,系统提示无法识别以太网卡,并要求我从列表中选择一个。我想我可能稍后再修复它,所以我说没有网络。有没有办法在 Parrot(基于 Debian)上安装正确的驱动程序?
Debian 输出:
猫/等/网络/接口
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
source /etc/network/interfaces.d/*
# The loopback network interface
auto lo
iface lo inet loopback
是否配置
lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
inet 127.0.0.1 netmask 255.0.0.0
inet6 ::1 prefixlen 128 scopeid 0x10<host>
loop txqueuelen 1000 (Local Loopback)
RX packets 6540 bytes 416615 (406.8 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 6540 bytes 416615 (406.8 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
wlan0: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500
ether 26:7e:42:4c:53:52 txqueuelen 1000 (Ethernet)
RX packets 31337 bytes 31058922 (29.6 MiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 23980 bytes 5218400 (4.9 MiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
wlan1: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500
ether 96:ab:7b:be:6b:71 txqueuelen 1000 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
额外的 Debian 输出:粘贴箱
Mac 硬件信息
ioreg -p IOUSB:
粘贴箱
ioreg -c AppleUSBDevice -p IOUSB:
粘贴箱
谢谢