我想了解我的 NVME 健康状况:
firstlove@chenli ~> sudo smartctl -A /dev/nvme0n1p3
smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.0.1-arch2-1] (local build)
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF SMART DATA SECTION ===
SMART/Health Information (NVMe Log 0x02)
Critical Warning: 0x00
Temperature: 49 Celsius
Available Spare: 100%
Available Spare Threshold: 5%
Percentage Used: 18%
Data Units Read: 46,120,988 [23.6 TB]
Data Units Written: 343,649,247 [175 TB]
Host Read Commands: 1,184,731,427
Host Write Commands: 3,228,585,654
Controller Busy Time: 4,397
Power Cycles: 922
Power On Hours: 11,374
Unsafe Shutdowns: 292
Media and Data Integrity Errors: 0
Error Information Log Entries: 1,620
Warning Comp. Temperature Time: 0
Critical Comp. Temperature Time: 0
firstlove@chenli ~> sudo nvme error-log --log-entries=1 /dev/nvme0n1p3
Error Log Entries for device:nvme0n1p3 entries:1
.................
Entry[ 0]
.................
error_count : 1620
sqid : 0
cmdid : 0x10
status_field : 0x2002(Invalid Field in Command: A reserved coded value or an unsupported value in a defined field)
phase_tag : 0
parm_err_loc : 0x28
lba : 0
nsid : 0
vs : 0
trtype : The transport type is not indicated or the error is not transport related.
cs : 0
trtype_spec_info: 0
.................
看起来有很多错误,但是 cmdid : 0x10" 和 "status_field : 0x2002" 是什么意思?
答案1
除了 NVMe 日志条目之外,NVMe 驱动器和文件系统是否正常工作?
如果是的话,听起来可能是这个问题。
https://www.smartmontools.org/ticket/1222
另外请回答:
每次您增加的价值是否相同?
- 重新启动系统?
- 让系统进入待机状态?