如何在Linux上检测USB 4.0?

如何在Linux上检测USB 4.0?

我买了这台联想笔记本电脑https://www.lenovo.com/gb/en/p/laptops/legion-laptops/legion-slim-series-laptops/lenovo-legion-slim-7-gen-8-(16-inch-amd)/ len101g0029#tech_specs应该支持USB 4.0。然而lsusb -t返回这个输出:

$ lsusb -t
/:  Bus 08.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/1p, 10000M
/:  Bus 07.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/1p, 480M
/:  Bus 06.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/1p, 10000M
/:  Bus 05.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/1p, 480M
/:  Bus 04.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/1p, 10000M
/:  Bus 03.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/1p, 480M
    |__ Port 1: Dev 2, If 0, Class=Vendor Specific Class, Driver=, 12M
/:  Bus 02.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/2p, 10000M
    |__ Port 2: Dev 2, If 0, Class=Hub, Driver=hub/2p, 5000M
        |__ Port 2: Dev 3, If 0, Class=Mass Storage, Driver=usb-storage, 5000M
/:  Bus 01.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/5p, 480M
    |__ Port 2: Dev 2, If 0, Class=Hub, Driver=hub/2p, 480M
    |__ Port 3: Dev 3, If 2, Class=Application Specific Interface, Driver=, 480M
    |__ Port 3: Dev 3, If 0, Class=Video, Driver=uvcvideo, 480M
    |__ Port 3: Dev 3, If 1, Class=Video, Driver=uvcvideo, 480M
    |__ Port 4: Dev 4, If 1, Class=Wireless, Driver=btusb, 480M
    |__ Port 4: Dev 4, If 2, Class=Wireless, Driver=, 480M
    |__ Port 4: Dev 4, If 0, Class=Wireless, Driver=btusb, 480M
    |__ Port 5: Dev 5, If 0, Class=Human Interface Device, Driver=usbhid, 12M

我看不到任何超过10000M的速率。在我的另一台配备 Thunderbolt 4 的笔记本电脑上,我可以看到 20000M。我用的是PoOS

$ uname -a
Linux pop-os 6.5.4-76060504-generic

Linux 内核 6.5.4 应该检测到 USB4,不是吗?

我错过了什么?联想是否在我的笔记本电脑上安装了错误的硬件端口?我应该退回这台笔记本电脑吗?

相关内容