大家好，
我正在写一篇论文，打算将其提交给《交通科学》杂志，我正在使用他们的模板。我在引用论文时遇到了困难。引用没有出现，我正在使用 TexStudio 和 TexMaker。
我的问题：
1）为什么在文本中、正文中和参考文献中都没有出现引用。
2）引文序言中有一些编码，我想知道是否需要修改我的.bib 文件以遵循代码（我的意思是标题和作者、年份等的顺序）
梅威瑟：
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%% Author template for Transportation Science (trsc)
%% Mirko Janc, Ph.D., INFORMS, [email protected]
%% ver. 0.95, December 2010
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%\documentclass[trsc,blindrev]{informs3}
\documentclass[trsc,nonblindrev]{informs3} % current default for manuscript submission
\OneAndAHalfSpacedXI % current default line spacing
%%\OneAndAHalfSpacedXII
%%\DoubleSpacedXII
%%\DoubleSpacedXI
% If hyperref is used, dvi-to-ps driver of choice must be declared as
% an additional option to the \documentclass. For example
%\documentclass[dvips,trsc]{informs3} % if dvips is used
%\documentclass[dvipsone,trsc]{informs3} % if dvipsone is used, etc.
% Private macros here (check that there is no clash with the style)
% Natbib setup for author-year style
\usepackage{natbib}
\bibpunct[, ]{(}{)}{,}{a}{}{,}%
\def\bibfont{\small}%
\def\bibsep{\smallskipamount}%
\def\bibhang{24pt}%
\def\newblock{\ }%
\def\BIBand{and}%
%% Setup of theorem styles. Outcomment only one.
%% Preferred default is the first option.
\TheoremsNumberedThrough % Preferred (Theorem 1, Lemma 1, Theorem 2)
%\TheoremsNumberedByChapter % (Theorem 1.1, Lema 1.1, Theorem 1.2)
%% Setup of the equation numbering system. Outcomment only one.
%% Preferred default is the first option.
\EquationsNumberedThrough % Default: (1), (2), ...
%\EquationsNumberedBySection % (1.1), (1.2), ...
% In the reviewing and copyediting stage enter the manuscript number.
%\MANUSCRIPTNO{} % When the article is logged in and DOI assigned to it,
% this manuscript number is no longer necessary
%%%%%%%%%%%%%%%%
\begin{document}
%%%%%%%%%%%%%%%%
% Outcomment only when entries are known. Otherwise leave as is and
% default values will be used.
%\setcounter{page}{1}
%\VOLUME{00}%
%\NO{0}%
%\MONTH{Xxxxx}% (month or a similar seasonal id)
%\YEAR{0000}% e.g., 2005
%\FIRSTPAGE{000}%
%\LASTPAGE{000}%
%\SHORTYEAR{00}% shortened year (two-digit)
%\ISSUE{0000} %
%\LONGFIRSTPAGE{0001} %
%\DOI{10.1287/xxxx.0000.0000}%
% Author's names for the running heads
% Sample depending on the number of authors;
% \RUNAUTHOR{Jones}
% \RUNAUTHOR{Jones and Wilson}
% \RUNAUTHOR{Jones, Miller, and Wilson}
% \RUNAUTHOR{Jones et al.} % for four or more authors
% Enter authors following the given pattern:
%\RUNAUTHOR{}
% Title or shortened title suitable for running heads. Sample:
% \RUNTITLE{Bundling Information Goods of Decreasing Value}
% Enter the (shortened) title:
%\RUNTITLE{}
% Full title. Sample:
% \TITLE{Bundling Information Goods of Decreasing Value}
% Enter the full title:
%\TITLE{}
% Block of authors and their affiliations starts here:
% NOTE: Authors with same affiliation, if the order of authors allows,
% should be entered in ONE field, separated by a comma.
% \EMAIL field can be repeated if more than one author
\ARTICLEAUTHORS{%
\AUTHOR{Author1}
\AFF{Author1 affiliation, \EMAIL{}, \URL{}}
\AUTHOR{Author2}
\AFF{Author2 affiliation, \EMAIL{}, \URL{}}
% Enter all authors
} % end of the block
\ABSTRACT{%
Text of your abstract % Enter your abstract
}%
% Sample
%\KEYWORDS{deterministic inventory theory; infinite linear programming duality;
% existence of optimal policies; semi-Markov decision process; cyclic schedule}
% Fill in data. If unknown, outcomment the field
\KEYWORDS{}
\HISTORY{}
\maketitle
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% Samples of sectioning (and labeling) in TRSC
% NOTE: (1) \section and \subsection do NOT end with a period
% (2) \subsubsection and lower need end punctuation
% (3) capitalization is as shown (title style).
%
%\section{Introduction.}\label{intro} %%1.
%\subsection{Duality and the Classical EOQ Problem.}\label{class-EOQ} %% 1.1.
%\subsection{Outline.}\label{outline1} %% 1.2.
%\subsubsection{Cyclic Schedules for the General Deterministic SMDP.}
% \label{cyclic-schedules} %% 1.2.1
%\section{Problem Description.}\label{problemdescription} %% 2.
% Text of your paper here
\section{Introduction} \label{intro}
I wonder if you might know why this citation \citep{assad1980modelling} does not appear here.
% Acknowledgments here
\ACKNOWLEDGMENT{%
% Enter the text of acknowledgments here
}% Leave this (end of acknowledgment)
% Appendix here
% Options are (1) APPENDIX (with or without general title) or
% (2) APPENDICES (if it has more than one unrelated sections)
% Outcomment the appropriate case if necessary
%
% \begin{APPENDIX}{<Title of the Appendix>}
% \end{APPENDIX}
%
% or
%
% \begin{APPENDICES}
% \section{<Title of Section A>}
% \section{<Title of Section B>}
% etc
% \end{APPENDICES}
% References here (outcomment the appropriate case)
% CASE 1: BiBTeX used to constantly update the references
% (while the paper is being written).
%\bibliographystyle{ormsv080} % outcomment this and next line in Case 1
%\bibliography{<your bib file(s)>} % if more than one, comma separated
\bibliographystyle{ormsv080}
\bibliography{PaperRef}
% CASE 2: BiBTeX used to generate mypaper.bbl (to be further fine tuned)
%\input{mypaper.bbl} % outcomment this line in Case 2
\end{document}
以及我的 .bib 文件中引用的论文：
@article{assad1980modelling,
title={Modelling of rail networks: toward a routing/makeup model},
author={Assad, A.A.},
journal={Transportation Research Part B: Methodological},
volume={14},
number={1},
pages={101--114},
year={1980},
publisher={Elsevier}
}
如果您能解决我的问题我将不胜感激。
问候 Bornay
答案1
编辑行
\bibliographystyle{PaperRef}
更改为：
\bibliography{PaperRef}
假设“PaperRef.bib”是您的参考书目文件的名称。
（目前，您的文档中没有包含文献文件。）