☰

在 TeXstudio 中使用 graphicx (includegraphics) 时出现问题

tag-icon • tag-icon graphics miktex texstudio includegraphics
在 TeXstudio 中使用 graphicx (includegraphics) 时出现问题

我（嗯，我女朋友）在尝试使用 \includegraphics 时遇到了 TeXstudio 中的这个错误。MikTeX 已更新，并且今天安装了 graphicx... 起初我以为加载的许多软件包不知何故发生了冲突，但在清除辅助文件并将文档缩减为

\documentclass[11pt]{article}

\usepackage{graphicx}

\begin{document}

\includegraphics{image}

\end{document}

我们仍然收到错误

Paragraph ended before \@tempa was complete.

是的，图像是文档主目录中的正确 .png，我已经完成了所有我能想到的常见故障排除。我是一位经验丰富的 LaTeX 用户，但在 MacTeX（显然是在 macOS 上）下，我仍在弄清楚 MikTeX/TeXstudio。我认为这与 MixTeX 安装 graphicx 的方式有关，但我对发行版的了解有限，因此感到困惑……任何帮助都值得感谢！

编辑：作为参考，这是日志文件的完整内容。在那里也找不到很多线索……

This is pdfTeX, Version 3.14159265-2.6-1.40.21 (MiKTeX 2.9.7300 64-bit) (preloaded format=pdflatex 2020.3.11)  15 MAR 2020 17:30
entering extended mode
**"./Doc test inclusion d'image.tex"
("Doc test inclusion d'image.tex"
LaTeX2e <2020-02-02> patch level 5
L3 programming layer <2020-03-06> (D:\MiKTeX\tex/latex/base\article.cls
Document Class: article 2019/12/20 v1.4l Standard LaTeX document class
(D:\MiKTeX\tex/latex/base\size11.clo
File: size11.clo 2019/12/20 v1.4l Standard LaTeX file (size option)
)
\c@part=\count167
\c@section=\count168
\c@subsection=\count169
\c@subsubsection=\count170
\c@paragraph=\count171
\c@subparagraph=\count172
\c@figure=\count173
\c@table=\count174
\abovecaptionskip=\skip47
\belowcaptionskip=\skip48
\bibindent=\dimen134
)
(D:\MiKTeX\tex/latex/graphics\graphicx.sty
Package: graphicx 2017/06/01 v1.1a Enhanced LaTeX Graphics (DPC,SPQR)

(D:\MiKTeX\tex/latex/graphics\keyval.sty
Package: keyval 2014/10/28 v1.15 key=value parser (DPC)
\KV@toks@=\toks15
)
(D:\MiKTeX\tex/latex/graphics\graphics.sty
Package: graphics 2017/06/25 v1.2c Standard LaTeX Graphics (DPC,SPQR)

(D:\MiKTeX\tex/latex/graphics\trig.sty
Package: trig 2016/01/03 v1.10 sin cos tan (DPC)
)
(D:\MiKTeX\tex/latex/graphics-cfg\graphics.cfg
File: graphics.cfg 2016/06/04 v1.11 sample graphics configuration
)
Package graphics Info: Driver file: pdftex.def on input line 99.

(D:\MiKTeX\tex/latex/graphics-def\pdftex.def
File: pdftex.def 2018/01/08 v1.0l Graphics/color driver for pdftex
))
\Gin@req@height=\dimen135
\Gin@req@width=\dimen136
)
(D:\MiKTeX\tex/latex/l3backend\l3backend-pdfmode.def
File: l3backend-pdfmode.def 2020-02-23 L3 backend support: PDF mode
\l__kernel_color_stack_int=\count175
\l__pdf_internal_box=\box45
)
("Doc test inclusion d'image.aux")
\openout1 = `"Doc test inclusion d'image.aux"'.

LaTeX Font Info:    Checking defaults for OML/cmm/m/it on input line 5.
LaTeX Font Info:    ... okay on input line 5.
LaTeX Font Info:    Checking defaults for OMS/cmsy/m/n on input line 5.
LaTeX Font Info:    ... okay on input line 5.
LaTeX Font Info:    Checking defaults for OT1/cmr/m/n on input line 5.
LaTeX Font Info:    ... okay on input line 5.
LaTeX Font Info:    Checking defaults for T1/cmr/m/n on input line 5.
LaTeX Font Info:    ... okay on input line 5.
LaTeX Font Info:    Checking defaults for TS1/cmr/m/n on input line 5.
LaTeX Font Info:    ... okay on input line 5.
LaTeX Font Info:    Checking defaults for OMX/cmex/m/n on input line 5.
LaTeX Font Info:    ... okay on input line 5.
LaTeX Font Info:    Checking defaults for U/cmr/m/n on input line 5.
LaTeX Font Info:    ... okay on input line 5.

(D:\MiKTeX\tex/context/base/mkii\supp-pdf.mkii
[Loading MPS to PDF converter (version 2006.09.02).]
\scratchcounter=\count176
\scratchdimen=\dimen137
\scratchbox=\box46
\nofMPsegments=\count177
\nofMParguments=\count178
\everyMPshowfont=\toks16
\MPscratchCnt=\count179
\MPscratchDim=\dimen138
\MPnumerator=\count180
\makeMPintoPDFobject=\count181
\everyMPtoPDFconversion=\toks17
) (D:\MiKTeX\tex/latex/epstopdf-pkg\epstopdf-base.sty
Package: epstopdf-base 2020-01-24 v2.11 Base part for package epstopdf
Package epstopdf-base Info: Redefining graphics rule for `.eps' on input line 4
85.
)
Runaway argument?
"D:/Latex/Exemples-bases/MontageDilution1.png" \edef \Gin@ext {\Gin@sepdefault 
\ETC.
! Paragraph ended before \@tempa was complete.
<to be read again> 
                   \par 
l.8 

I suspect you've forgotten a `}', causing me to apply this
control sequence to too much text. How can we recover?
My plan is to forget the whole thing and hope for the best.

[1

{C:/Users/alice/AppData/Local/MiKTeX/2.9/pdftex/config/pdftex.map}]
("Doc test inclusion d'image.aux") )
(\end occurred inside a group at level 2)

### semi simple group (level 2) entered at line 7 (\begingroup)
### semi simple group (level 1) entered at line 7 (\begingroup)
### bottom level
(\end occurred when \ifx on line 7 was incomplete)
(\end occurred when \ifx on line 7 was incomplete) 
Here is how much of TeX's memory you used:
 1125 strings out of 480910
 16198 string characters out of 2917146
 249766 words of memory out of 3000000
 17047 multiletter control sequences out of 15000+200000
 532638 words of font info for 25 fonts, out of 3000000 for 9000
 1141 hyphenation exceptions out of 8191
 30i,4n,25p,207b,121s stack positions out of 5000i,500n,10000p,200000b,50000s
<D:/MiKTeX/fonts/type1/public
/amsfonts/cm/cmr10.pfb>
Output written on "Doc test inclusion d'image.pdf" (1 page, 8398 bytes).
PDF statistics:
 10 PDF objects out of 1000 (max. 8388607)
 0 named destinations out of 1000 (max. 500000)
 1 words of extra memory for PDF output out of 10000 (max. 10000000)

相关内容