我使用串行连接连接到服务器。我目前位于 ALOM 菜单(如下所示)。我需要进入 {ok} 提示符。我如何从这里进入那里?
仅供参考,一个主要问题:我没有启动密码。我正在尝试重置它并从启动盘安装 Solaris。
ALOM <ESC> Menu
f - Wait for flash download from host.
C - Copy Boot Monitor from FLASHBOAT.
j - Jump to main code (at 0x01010000).
m - Run POST Menu.
(Do not try this after a flash update of the boot monitor!)
d - play DOOM
s - Set clock speed
e - Set external and internal console serial ports baud rate
i - Set internal control serial port baud rate
t - Toggle 'OK' flag
R - Reset SC
b,h,w - Read byte/halfword/word
B,H,W - Write byte/halfword/word
r - Return to bootmon
Your selection:
答案1
按下按键:
Ctrl+ Function (Fn)+ F12(应该是“暂停”)并且屏幕上会出现一条消息。
在完成所有探测之后执行此操作,并尝试了解何时是按下这些键的正确时间。
我正在使用 SecureCRT。
SC Alert: SC Request to send Break to host.
SC Alert: SC Request to send Break to host.
Probing system devices
Starting RTC ..
Probing memory
Probing I/O buses
Netra 240, Keyboard Present
Copyright 2010 Sun Microsystems, ...
Running diagnostic script obdiag/normal
Testing /pci@1e,600000/ide@d
...
Initializing 1024MB of memory at addr 0 /
SC Alert: SC Request to send Break to host.
Type 'go' to resume
{1} ok