我有一个 IBM 刀片中心，配有 13 台 HS22（4Gb 和 8Gb Qlogic HBA 混合）服务器和双 4Gb Brocade 光纤 SAN 交换机。我正在用 QLogic 8Gb 20 端口智能直通模块 (44X1905) 替换这两个 Brocade SAN 交换机。更换交换机后，所有内部端口状态都显示“已关闭”。我该如何激活这些端口？
QLOGIC8GbT: USERID> SHOW PORT
Admin Operational Login Config Running Link Link
Port State State Status Type Type State Speed
---- ----- ----------- ------ ------ ------- ----- -----
Ext1:0 Online Online LoggedIn TF TF Active 8Gb/s
Ext2:15 Online Offline NotLoggedIn TF TF Inactive Auto
Ext3:16 Online Offline NotLoggedIn TF TF Inactive Auto
Ext4:17 Online Offline NotLoggedIn TF TF Inactive Auto
Ext5:18 Online Offline NotLoggedIn TF TF Inactive Auto
Ext6:19 Online Offline NotLoggedIn TF TF Inactive Auto
Bay1 Online Downed NotLoggedIn TH TH(iso) Inactive Auto
Bay2 Online Downed NotLoggedIn TH TH(iso) Inactive Auto
Bay3 Online Offline NotLoggedIn TH TH Inactive Auto
Bay4 Online Downed NotLoggedIn TH TH(iso) Inactive Auto
Bay5 Online Downed NotLoggedIn TH TH(iso) Inactive Auto
Bay6 Online Downed NotLoggedIn TH TH(iso) Inactive Auto
Bay7 Online Downed NotLoggedIn TH TH(iso) Inactive Auto
Bay8 Online Downed NotLoggedIn TH TH(iso) Inactive Auto
Bay9 Online Downed NotLoggedIn TH TH(iso) Inactive Auto
Bay10 Online Downed NotLoggedIn TH TH(iso) Inactive Auto
Bay11 Online Downed NotLoggedIn TH TH(iso) Inactive Auto
Bay12 Online Downed NotLoggedIn TH TH(iso) Inactive Auto
Bay13 Online Offline NotLoggedIn TH TH Inactive Auto
Bay14 Online Downed NotLoggedIn TH TH(iso) Inactive Auto
QLOGIC8GbT: USERID> show port 14
Port Number: 14
------------
ActiveTFPortMap None
AdminState Online
AsicNumber 0
AsicPort 10
ConfigType TH
DownstreamISL False
EpConnState None
EpIsoReason MappedPortOffline
LinkSpeed Auto
LinkState Inactive
LoginStatus NotLoggedIn
MaxCredit 16
MediaPartNumber
MediaRevision
MediaSpeeds 2, 4, 8Gb/s
MediaType NotApplicable
MediaVendor
MediaVendorID
OperationalState Downed
PerfTuningMode Normal
PortWWN 20:0e:00:c0:dd:23:e8:ec
POSTFaultCode 00000000
POSTStatus Passed
RunningType TH
SupportedSpeeds 2, 4, 8Gb/s
SymbolicName Port14
SyncStatus SyncLost
TestFaultCode 00000000
TestStatus NeverRun
UpstreamISL False
XmitterEnabled False
Port Statistics
ALInit 0 LIP_F8_F7 0
ALInitError 0 LinkFailures 0
BadFrames 0 Login 0
BBCR_FrameFailures 0 Logout 0
BBCR_RRDYFailures 0 LongFramesIn 0
Class2FramesIn 0 LoopTimeouts 0
Class2FramesOut 0 LossOfSync 0
Class2WordsIn 0 LostFrames 0
Class2WordsOut 0 LostRRDYs 0
Class3FramesIn 6 PrimSeqErrors 0
Class3FramesOut 0 RxLinkResets 3
Class3Toss 0 RxOfflineSeq 3
Class3WordsIn 216 ShortFramesIn 0
Class3WordsOut 0 TotalErrors 2724
DecodeErrors 2724 TotalLinkResets 6
EpConnects 0 TotalLIPsRecvd 0
FBusy 0 TotalLIPsXmitd 0
FlowErrors 0 TotalOfflineSeq 25
FReject 0 TotalRxFrames 6
InvalidCRC 0 TotalRxWords 216
InvalidDestAddr 0 TotalTxFrames 0
LIP_AL_PD_AL_PS 0 TotalTxWords 0
LIP_F7_AL_PS 0 TxLinkResets 3
LIP_F7_F7 0 TxOfflineSeq 22
LIP_F8_AL_PS 0
答案1
端口可能由于多种原因而关闭。
- 不兼容的连接器。
- phy 连接问题。
- 或者无法登录 SAN sw。NPIV 在 qlogic 端口上是否处于活动状态/UP？如果它关闭，您将必须购买额外的许可证/功能。