![amdgpu 是否支持我的 Fury X,为什么驱动程序没有加载?](https://linux22.com/image/76173/amdgpu%20%E6%98%AF%E5%90%A6%E6%94%AF%E6%8C%81%E6%88%91%E7%9A%84%20Fury%20X%EF%BC%8C%E4%B8%BA%E4%BB%80%E4%B9%88%E9%A9%B1%E5%8A%A8%E7%A8%8B%E5%BA%8F%E6%B2%A1%E6%9C%89%E5%8A%A0%E8%BD%BD%EF%BC%9F.png)
目前我的 Linux 机器只能检测到一台显示器,并且似乎只运行最低限度的图形支持。我的系统似乎识别出该卡是 Fury X,但没有为其加载任何驱动程序。无论如何,梅萨知道如何使用该卡(这很奇怪),但它只能显示在我的第一台显示器上。
我可以/应该为该卡设置别名以使用 AMDGPU 还是它尚不支持 Fury X?如果是这样,我将如何去做模态?
lspci
01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Fiji [Radeon R9 FURY Series] (rev c8) (prog-if 00 [VGA controller])
Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] Radeon R9 FURY X
Flags: bus master, fast devsel, latency 0, IRQ 10
Memory at c0000000 (64-bit, prefetchable) [size=256M]
Memory at d0000000 (64-bit, prefetchable) [size=2M]
I/O ports at e000 [size=256]
Memory at fea00000 (32-bit, non-prefetchable) [size=256K]
Expansion ROM at fea40000 [disabled] [size=128K]
Capabilities: [48] Vendor Specific Information: Len=08 <?>
Capabilities: [50] Power Management version 3
Capabilities: [58] Express Legacy Endpoint, MSI 00
Capabilities: [a0] MSI: Enable- Count=1/1 Maskable- 64bit+
Capabilities: [100] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
Capabilities: [150] Advanced Error Reporting
Capabilities: [200] #15
Capabilities: [270] #19
Capabilities: [2b0] Address Translation Service (ATS)
Capabilities: [2c0] #13
Capabilities: [2d0] #1b
Capabilities: [328] Alternative Routing-ID Interpretation (ARI)
长沙
*-display UNCLAIMED
description: VGA compatible controller
product: Fiji [Radeon R9 FURY Series]
vendor: Advanced Micro Devices, Inc. [AMD/ATI]
physical id: 0
bus info: pci@0000:01:00.0
version: c8
width: 64 bits
clock: 33MHz
capabilities: vga_controller bus_master cap_list
configuration: latency=0
resources: memory:c0000000-cfffffff memory:d0000000-d01fffff ioport:e000(size=256) memory:fea00000-fea3ffff memory:fea40000-fea5ffff
答案1
在论坛和内核中进行一些挖掘后,我发现 Fiji 尚不受支持。预计 4.3 中部分支持,4.4 中全面支持。