问题与此相同:
RTL8821CE 从 5.15.0-60 升级到 5.19.0-32 后 wifi 失效
lspci
07:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTL8411 PCI Express Card Reader (rev 01)
07:00.2 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 0a)
08:00.0 Network controller: Broadcom Inc. and subsidiaries BCM4313 802.11bgn Wireless Network Adapter (rev 01)
我被建议安装 Broadcom 驱动程序,我使用
sudo apt install firmware-b43-installer
驱动程序现在显示在软件和更新中,但重启后我仍然看不到 WiFi 选项。
lshw -C network
*-network
description: Ethernet interface
product: RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
vendor: Realtek Semiconductor Co., Ltd.
physical id: 0.2
bus info: pci@0000:07:00.2
logical name: eno1
version: 0a
serial: xx:xx:xx:xx:xx:Xx
capacity: 1Gbit/s
width: 64 bits
clock: 33MHz
capabilities: bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=5.19.0-32-generic firmware=rtl8411-1_0.0.3 06/18/12 latency=0 link=no multicast=yes port=twisted pair
resources: irq:16 ioport:2000(size=256) memory:61404000-61404fff memory:61400000-61403fff
*-network UNCLAIMED
description: Network controller
product: BCM4313 802.11bgn Wireless Network Adapter
vendor: Broadcom Inc. and subsidiaries
physical id: 0
bus info: pci@0000:08:00.0
version: 01
width: 64 bits
clock: 33MHz
capabilities: bus_master cap_list
configuration: latency=0
resources: memory:61500000-61503fff
现在我该怎么做?
lspci -knn | grep Net -A3
08:00.0 Network controller [0280]: Broadcom Inc. and subsidiaries BCM4313 802.11bgn Wireless Network Adapter [14e4:4727] (rev 01)
DeviceName: Broadcom 802.11b/g/n WLAN
Subsystem: Hewlett-Packard Company BCM4313 802.11bgn Wireless Network Adapter [103c:1795]
Kernel modules: bcma
dkms status
bcmwl/6.30.223.271+bdcom, 5.15.0-60-generic, x86_64: installed
答案1
BCM4313 802.11bgn Wireless Network Adapter [14e4:4727] (rev 01)
需要b43
带有的内核模块firmware-b43-installer
。
您安装了错误的驱动程序,导致正确的驱动程序被列入黑名单。
您可以在 GUI 中选择“不使用该设备”,也可以运行
sudo apt purge bcmwl-kernel-source
sudo modprobe b43
使设备工作。