当我运行 Ubuntu 时,它会自动连接到无线网络,但无法连接到互联网,直到我禁用然后启用网络,
我需要解决这个问题,帮帮忙。
我运行时得到这个输出lspci
:
00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 02)
00:01.0 PCI bridge: Intel Corporation Core Processor PCI Express x16 Root Port (rev 02)
00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06)
00:1a.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05)
00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05)
00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 05)
00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 05)
00:1c.2 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 3 (rev 05)
00:1c.3 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 4 (rev 05)
00:1c.4 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 5 (rev 05)
00:1d.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a5)
00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 05)
00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA AHCI Controller (rev 05)
00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 05)
00:1f.6 Signal processing controller: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem (rev 05)
01:00.0 VGA compatible controller: nVidia Corporation GT218 [GeForce 310M] (rev a2)
01:00.1 Audio device: nVidia Corporation High Definition Audio Controller (rev a1)
02:00.0 Network controller: Intel Corporation Centrino Advanced-N 6200 (rev 35)
03:00.0 SD Host controller: Ricoh Co Ltd MMC/SD Host Controller
03:00.1 System peripheral: Ricoh Co Ltd Memory Stick Host Controller
03:00.3 FireWire (IEEE 1394): Ricoh Co Ltd FireWire Host Controller
03:00.4 SD Host controller: Ricoh Co Ltd MMC/SD Host Controller
04:00.0 Ethernet controller: Atheros Communications AR8131 Gigabit Ethernet (rev c0)
ff:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 02)
ff:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 02)
ff:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 02)
ff:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 02)
ff:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 02)
ff:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 02)
当我运行时我得到这个输出lsusb
Bus 002 Device 003: ID 045e:00e1 Microsoft Corp. Wireless Laser Mouse 6000 Reciever
Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 005: ID 0489:e00f Foxconn / Hon Hai
Bus 001 Device 004: ID 05ca:18b7 Ricoh Co., Ltd
Bus 001 Device 003: ID 147e:1001 Upek
Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
当我运行时我得到这个输出sudo lshw -class Network
*-network
description: Wireless interface
product: Centrino Advanced-N 6200
vendor: Intel Corporation
physical id: 0
bus info: pci@0000:02:00.0
logical name: wlan0
version: 35
serial: 00:23:14:ea:2e:98
width: 64 bits
clock: 33MHz
capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless
configuration: broadcast=yes driver=iwlagn driverversion=2.6.38-10-generic firmware=9.221.4.1 build 25532 ip=192.168.1.2 latency=0 link=yes multicast=yes wireless=IEEE 802.11abgn
resources: irq:44 memory:dd100000-dd101fff
*-network
description: Ethernet interface
product: AR8131 Gigabit Ethernet
vendor: Atheros Communications
physical id: 0
bus info: pci@0000:04:00.0
logical name: eth0
version: c0
serial: 00:24:be:ea:64:04
capacity: 1Gbit/s
width: 64 bits
clock: 33MHz
capabilities: pm msi pciexpress vpd bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=atl1c driverversion=1.0.1.0-NAPI firmware=N/A latency=0 link=no multicast=yes port=twisted pair
resources: irq:45 memory:db100000-db13ffff ioport:4000(size=128)
当我运行时我得到这个输出rfkill list all
0:hci0:蓝牙 软阻止:否 硬阻止:否 1:phy0:无线局域网 软阻止:否 硬阻止:否
答案1
不幸的是,我没有答案,但我的 Vaio 笔记本电脑上也存在同样的问题,它配备了 WiMax 6250 wifi 适配器。我最近发现,我必须删除 SSID 及其配置并重新添加,然后它才能开始工作。否则,我会从路由器获得一个有效的 IP 地址,但无法 ping 通、检查路由等。什么都没有。我认为这是一个错误,但目前还不能确定它的位置。
答案2
(这完全是猜测)
尝试安装新的驱动程序反向移植,有时驱动程序的修复会反向移植到稳定版本。安装此软件包(或单击链接):
Linux-backports-模块-cw-2.6.39-natty-通用
然后重新启动并查看是否有帮助。