我有 Freeradius v.3 服务器和 WAccessPoint (hostapd)，两者都安装在同一台机器 (localhost) Ubuntu Server 16.04.1 上。
我首先在没有 freeradius 的情况下测试了我的连接 -> 我可以连接到 WAP 并通过 NAS 和 MASQUERADE 使用互联网。
当我想使用 Freeradius 启动身份验证时，我将 WAP-PSK 更改为 WAP-EAP，在 hostapd.conf 中为 RADIUS-SERVER 添加一些行并启动 freeradius -X （在调试模式下），但当我尝试时没有日志通过AP连接。
无论连接是否成功，每次连接到 Freeradius 都应该记录和调试它，但我什么也没看到，这意味着我的客户端和 Freeradius 无法相互识别。这是我的设置：
主机配置文件：
...
own_ip_addr=127.0.0.1
wpa_key_mgmt=WPA-EAP
rsn_pairwise=CCMP
wmm_enabled=1
wpa=2
channel=1
auth_algs=1
auth_server_addr=127.0.0.1
auth_server_port=1812
auth_server_shared_secret=secret
...
/etc/freeradius/clients.conf
client localhost {
ipaddr=127.0.0.1
secret=secret
require_message_authenticator = yes
}
我还尝试使用我的 WAP 接口的 ipaddr 在 client.conf 中创建一个新客户端，但我也不起作用。
更新1：
自由半径-v：
FreeRADIUS Version 3.0.11, for host x86_64-pc-linux-gnu
netstat -alnp | 网络统计grep 1812：
udp 0 0 0.0.0.0:1812 0.0.0.0:*
udp 0 0 127.0.0.1:25868 127.0.0.1:1812 ESTABLISHED 1191/hostapd
UPDATE2：服务器配置文件：
server {
listen {
type = auth
port = 1812
ipaddr = *
}
authorize {
preprocess
eap {
ok = return
}
expiration
logintime
}
authenticate {
eap
}
preacct {
preprocess
acct_unique
suffix
files
}
accounting {
detail
# unix
radutmp
# exec
attr_filter.accounting_response
}
session {
radutmp
}
post-auth {
# exec
Post-Auth-Type REJECT {
attr_filter.access_reject
}
}
pre-proxy {
}
post-proxy {
eap
}
}
更新3：
自由半径-X：
Server was built with:
accounting : yes
authentication : yes
ascend-binary-attributes : yes
coa : yes
control-socket : yes
detail : yes
dhcp : yes
dynamic-clients : yes
osfc2 : no
proxy : yes
regex-pcre : no
regex-posix : yes
regex-posix-extended : yes
session-management : yes
stats : yes
tcp : yes
threads : yes
tls : yes
unlang : yes
vmps : yes
developer : no
Server core libs:
freeradius-server : 3.0.11
talloc : 2.0.*
ssl : 1.0.2g release
Endianness:
little
Compilation flags:
cppflags : -Wdate-time -D_FORTIFY_SOURCE=2
cflags : -I/build/freeradius-G88Mfz/freeradius-3.0.11 -I/build/freeradius-G88Mfz/freeradius-3.0.11/src -include /build/freeradius-G88Mfz/freeradius-3.0.11/src/freeradius-devel/autoconf.h -include /build/freeradius-G88Mfz/freeradius-3.0.11/src/freeradius-devel/build.h -include /build/freeradius-G88Mfz/freeradius-3.0.11/src/freeradius-devel/features.h -include /build/freeradius-G88Mfz/freeradius-3.0.11/src/freeradius-devel/radpaths.h -fno-strict-aliasing -g -O2 -fstack-protector-strong -Wformat -Werror=format-security -O2 -Wall -std=c99 -D_GNU_SOURCE -D_REENTRANT -D_POSIX_PTHREAD_SEMANTICS -DOPENSSL_NO_KRB5 -DNDEBUG -DIS_MODULE=1
ldflags : -Wl,-Bsymbolic-functions -Wl,-z,relro
libs : -lcrypto -lssl -ltalloc -lcap -lnsl -lresolv -ldl -lpthread -lreadline
Copyright (C) 1999-2016 The FreeRADIUS server project and contributors
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE
You may redistribute copies of FreeRADIUS under the terms of the
GNU General Public License
For more information about these matters, see the file named COPYRIGHT
Starting - reading configuration files ...
including dictionary file /usr/share/freeradius/dictionary
including dictionary file /usr/share/freeradius/dictionary.dhcp
including dictionary file /usr/share/freeradius/dictionary.vqp
including dictionary file /etc/freeradius/dictionary
including configuration file /etc/freeradius/radiusd.conf
including configuration file /etc/freeradius/clients.conf
including files in directory /etc/freeradius/mods-enabled/
including configuration file /etc/freeradius/mods-enabled/detail
including configuration file /etc/freeradius/mods-enabled/utf8
including configuration file /etc/freeradius/mods-enabled/linelog
including configuration file /etc/freeradius/mods-enabled/realm
including configuration file /etc/freeradius/mods-enabled/echo
including configuration file /etc/freeradius/mods-enabled/radutmp
including configuration file /etc/freeradius/mods-enabled/exec
including configuration file /etc/freeradius/mods-enabled/unpack
including configuration file /etc/freeradius/mods-enabled/mschap
including configuration file /etc/freeradius/mods-enabled/replicate
including configuration file /etc/freeradius/mods-enabled/cache_eap
including configuration file /etc/freeradius/mods-enabled/pap
including configuration file /etc/freeradius/mods-enabled/passwd
including configuration file /etc/freeradius/mods-enabled/files
including configuration file /etc/freeradius/mods-enabled/logintime
including configuration file /etc/freeradius/mods-enabled/unix
including configuration file /etc/freeradius/mods-enabled/soh
including configuration file /etc/freeradius/mods-enabled/expiration
including configuration file /etc/freeradius/mods-enabled/sradutmp
including configuration file /etc/freeradius/mods-enabled/chap
including configuration file /etc/freeradius/mods-enabled/preprocess
including configuration file /etc/freeradius/mods-enabled/expr
including configuration file /etc/freeradius/mods-enabled/attr_filter
including configuration file /etc/freeradius/mods-enabled/dynamic_clients
including configuration file /etc/freeradius/mods-enabled/digest
including configuration file /etc/freeradius/mods-enabled/eap
including configuration file /etc/freeradius/mods-enabled/always
including configuration file /etc/freeradius/mods-enabled/detail.log
including configuration file /etc/freeradius/mods-enabled/ntlm_auth
including files in directory /etc/freeradius/policy.d/
including configuration file /etc/freeradius/policy.d/canonicalization
including configuration file /etc/freeradius/policy.d/filter
including configuration file /etc/freeradius/policy.d/accounting
including configuration file /etc/freeradius/policy.d/cui
including configuration file /etc/freeradius/policy.d/dhcp
including configuration file /etc/freeradius/policy.d/operator-name
including configuration file /etc/freeradius/policy.d/eap
including configuration file /etc/freeradius/policy.d/abfab-tr
including configuration file /etc/freeradius/policy.d/debug
including configuration file /etc/freeradius/policy.d/control
including files in directory /etc/freeradius/sites-enabled/
including configuration file /etc/freeradius/sites-enabled/mynetwork
main {
security {
user = "freerad"
group = "freerad"
allow_core_dumps = no
}
name = "freeradius"
prefix = "/usr"
localstatedir = "/var"
logdir = "/var/log/freeradius"
run_dir = "/var/run/freeradius"
}
main {
name = "freeradius"
prefix = "/usr"
localstatedir = "/var"
sbindir = "/usr/sbin"
logdir = "/var/log/freeradius"
run_dir = "/var/run/freeradius"
libdir = "/usr/lib/freeradius"
radacctdir = "/var/log/freeradius/radacct"
hostname_lookups = no
max_request_time = 30
cleanup_delay = 5
max_requests = 16384
pidfile = "/var/run/freeradius/freeradius.pid"
checkrad = "/usr/sbin/checkrad"
debug_level = 0
proxy_requests = no
log {
stripped_names = no
auth = yes
auth_badpass = no
auth_goodpass = no
colourise = yes
msg_denied = "You are already logged in - access denied"
}
resources {
}
security {
max_attributes = 200
reject_delay = 1.000000
status_server = yes
}
}
radiusd: #### Loading Realms and Home Servers ####
radiusd: #### Loading Clients ####
client myclient {
ipaddr = 10.0.0.1
require_message_authenticator = yes
secret = <<< secret >>>
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
client localhost {
ipaddr = 127.0.0.1
require_message_authenticator = no
secret = <<< secret >>>
nas_type = "other"
proto = "*"
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
client localhost_ipv6 {
ipv6addr = ::1
require_message_authenticator = no
secret = <<< secret >>>
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
Debugger not attached
# Creating Auth-Type = eap
radiusd: #### Instantiating modules ####
modules {
# Loaded module rlm_detail
# Loading module "detail" from file /etc/freeradius/mods-enabled/detail
detail {
filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
escape_filenames = no
log_packet_header = no
}
# Loaded module rlm_utf8
# Loading module "utf8" from file /etc/freeradius/mods-enabled/utf8
# Loaded module rlm_linelog
# Loading module "linelog" from file /etc/freeradius/mods-enabled/linelog
linelog {
filename = "/var/log/freeradius/linelog"
escape_filenames = no
syslog_severity = "info"
permissions = 384
format = "This is a log message for %{User-Name}"
reference = "messages.%{%{reply:Packet-Type}:-default}"
}
# Loading module "log_accounting" from file /etc/freeradius/mods-enabled/linelog
linelog log_accounting {
filename = "/var/log/freeradius/linelog-accounting"
escape_filenames = no
syslog_severity = "info"
permissions = 384
format = ""
reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}"
}
# Loaded module rlm_realm
# Loading module "IPASS" from file /etc/freeradius/mods-enabled/realm
realm IPASS {
format = "prefix"
delimiter = "/"
ignore_default = no
ignore_null = no
}
# Loading module "suffix" from file /etc/freeradius/mods-enabled/realm
realm suffix {
format = "suffix"
delimiter = "@"
ignore_default = no
ignore_null = no
}
# Loading module "realmpercent" from file /etc/freeradius/mods-enabled/realm
realm realmpercent {
format = "suffix"
delimiter = "%"
ignore_default = no
ignore_null = no
}
# Loading module "ntdomain" from file /etc/freeradius/mods-enabled/realm
realm ntdomain {
format = "prefix"
delimiter = "\\"
ignore_default = no
ignore_null = no
}
# Loaded module rlm_exec
# Loading module "echo" from file /etc/freeradius/mods-enabled/echo
exec echo {
wait = yes
program = "/bin/echo %{User-Name}"
input_pairs = "request"
output_pairs = "reply"
shell_escape = yes
}
# Loaded module rlm_radutmp
# Loading module "radutmp" from file /etc/freeradius/mods-enabled/radutmp
radutmp {
filename = "/var/log/freeradius/radutmp"
username = "%{User-Name}"
case_sensitive = yes
check_with_nas = yes
permissions = 384
caller_id = yes
}
# Loading module "exec" from file /etc/freeradius/mods-enabled/exec
exec {
wait = no
input_pairs = "request"
shell_escape = yes
timeout = 10
}
# Loaded module rlm_unpack
# Loading module "unpack" from file /etc/freeradius/mods-enabled/unpack
# Loaded module rlm_mschap
# Loading module "mschap" from file /etc/freeradius/mods-enabled/mschap
mschap {
use_mppe = yes
require_encryption = no
require_strong = no
with_ntdomain_hack = yes
passchange {
}
allow_retry = yes
}
# Loaded module rlm_replicate
# Loading module "replicate" from file /etc/freeradius/mods-enabled/replicate
# Loaded module rlm_cache
# Loading module "cache_eap" from file /etc/freeradius/mods-enabled/cache_eap
cache cache_eap {
driver = "rlm_cache_rbtree"
key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}"
ttl = 15
max_entries = 0
epoch = 0
add_stats = no
}
# Loaded module rlm_pap
# Loading module "pap" from file /etc/freeradius/mods-enabled/pap
pap {
normalise = yes
}
# Loaded module rlm_passwd
# Loading module "etc_passwd" from file /etc/freeradius/mods-enabled/passwd
passwd etc_passwd {
filename = "/etc/passwd"
format = "*User-Name:Crypt-Password:"
delimiter = ":"
ignore_nislike = no
ignore_empty = yes
allow_multiple_keys = no
hash_size = 100
}
# Loaded module rlm_files
# Loading module "files" from file /etc/freeradius/mods-enabled/files
files {
filename = "/etc/freeradius/mods-config/files/authorize"
acctusersfile = "/etc/freeradius/mods-config/files/accounting"
preproxy_usersfile = "/etc/freeradius/mods-config/files/pre-proxy"
}
# Loaded module rlm_logintime
# Loading module "logintime" from file /etc/freeradius/mods-enabled/logintime
logintime {
minimum_timeout = 60
}
# Loaded module rlm_unix
# Loading module "unix" from file /etc/freeradius/mods-enabled/unix
unix {
radwtmp = "/var/log/freeradius/radwtmp"
}
Creating attribute Unix-Group
# Loaded module rlm_soh
# Loading module "soh" from file /etc/freeradius/mods-enabled/soh
soh {
dhcp = yes
}
# Loaded module rlm_expiration
# Loading module "expiration" from file /etc/freeradius/mods-enabled/expiration
# Loading module "sradutmp" from file /etc/freeradius/mods-enabled/sradutmp
radutmp sradutmp {
filename = "/var/log/freeradius/sradutmp"
username = "%{User-Name}"
case_sensitive = yes
check_with_nas = yes
permissions = 420
caller_id = no
}
# Loaded module rlm_chap
# Loading module "chap" from file /etc/freeradius/mods-enabled/chap
# Loaded module rlm_preprocess
# Loading module "preprocess" from file /etc/freeradius/mods-enabled/preprocess
preprocess {
huntgroups = "/etc/freeradius/mods-config/preprocess/huntgroups"
hints = "/etc/freeradius/mods-config/preprocess/hints"
with_ascend_hack = no
ascend_channels_per_line = 23
with_ntdomain_hack = no
with_specialix_jetstream_hack = no
with_cisco_vsa_hack = no
with_alvarion_vsa_hack = no
}
# Loaded module rlm_expr
# Loading module "expr" from file /etc/freeradius/mods-enabled/expr
expr {
safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ"
}
# Loaded module rlm_attr_filter
# Loading module "attr_filter.post-proxy" from file /etc/freeradius/mods-enabled/attr_filter
attr_filter attr_filter.post-proxy {
filename = "/etc/freeradius/mods-config/attr_filter/post-proxy"
key = "%{Realm}"
relaxed = no
}
# Loading module "attr_filter.pre-proxy" from file /etc/freeradius/mods-enabled/attr_filter
attr_filter attr_filter.pre-proxy {
filename = "/etc/freeradius/mods-config/attr_filter/pre-proxy"
key = "%{Realm}"
relaxed = no
}
# Loading module "attr_filter.access_reject" from file /etc/freeradius/mods-enabled/attr_filter
attr_filter attr_filter.access_reject {
filename = "/etc/freeradius/mods-config/attr_filter/access_reject"
key = "%{User-Name}"
relaxed = no
}
# Loading module "attr_filter.access_challenge" from file /etc/freeradius/mods-enabled/attr_filter
attr_filter attr_filter.access_challenge {
filename = "/etc/freeradius/mods-config/attr_filter/access_challenge"
key = "%{User-Name}"
relaxed = no
}
# Loading module "attr_filter.accounting_response" from file /etc/freeradius/mods-enabled/attr_filter
attr_filter attr_filter.accounting_response {
filename = "/etc/freeradius/mods-config/attr_filter/accounting_response"
key = "%{User-Name}"
relaxed = no
}
# Loaded module rlm_dynamic_clients
# Loading module "dynamic_clients" from file /etc/freeradius/mods-enabled/dynamic_clients
# Loaded module rlm_digest
# Loading module "digest" from file /etc/freeradius/mods-enabled/digest
# Loaded module rlm_eap
# Loading module "eap" from file /etc/freeradius/mods-enabled/eap
eap {
default_eap_type = "tls"
timer_expire = 60
ignore_unknown_eap_types = no
cisco_accounting_username_bug = no
max_sessions = 4096
}
# Loaded module rlm_always
# Loading module "reject" from file /etc/freeradius/mods-enabled/always
always reject {
rcode = "reject"
simulcount = 0
mpp = no
}
# Loading module "fail" from file /etc/freeradius/mods-enabled/always
always fail {
rcode = "fail"
simulcount = 0
mpp = no
}
# Loading module "ok" from file /etc/freeradius/mods-enabled/always
always ok {
rcode = "ok"
simulcount = 0
mpp = no
}
# Loading module "handled" from file /etc/freeradius/mods-enabled/always
always handled {
rcode = "handled"
simulcount = 0
mpp = no
}
# Loading module "invalid" from file /etc/freeradius/mods-enabled/always
always invalid {
rcode = "invalid"
simulcount = 0
mpp = no
}
# Loading module "userlock" from file /etc/freeradius/mods-enabled/always
always userlock {
rcode = "userlock"
simulcount = 0
mpp = no
}
# Loading module "notfound" from file /etc/freeradius/mods-enabled/always
always notfound {
rcode = "notfound"
simulcount = 0
mpp = no
}
# Loading module "noop" from file /etc/freeradius/mods-enabled/always
always noop {
rcode = "noop"
simulcount = 0
mpp = no
}
# Loading module "updated" from file /etc/freeradius/mods-enabled/always
always updated {
rcode = "updated"
simulcount = 0
mpp = no
}
# Loading module "auth_log" from file /etc/freeradius/mods-enabled/detail.log
detail auth_log {
filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
escape_filenames = no
log_packet_header = no
}
# Loading module "reply_log" from file /etc/freeradius/mods-enabled/detail.log
detail reply_log {
filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
escape_filenames = no
log_packet_header = no
}
# Loading module "pre_proxy_log" from file /etc/freeradius/mods-enabled/detail.log
detail pre_proxy_log {
filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
escape_filenames = no
log_packet_header = no
}
# Loading module "post_proxy_log" from file /etc/freeradius/mods-enabled/detail.log
detail post_proxy_log {
filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
escape_filenames = no
log_packet_header = no
}
# Loading module "ntlm_auth" from file /etc/freeradius/mods-enabled/ntlm_auth
exec ntlm_auth {
wait = yes
program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}"
shell_escape = yes
}
instantiate {
}
# Instantiating module "detail" from file /etc/freeradius/mods-enabled/detail
# Instantiating module "linelog" from file /etc/freeradius/mods-enabled/linelog
# Instantiating module "log_accounting" from file /etc/freeradius/mods-enabled/linelog
# Instantiating module "IPASS" from file /etc/freeradius/mods-enabled/realm
# Instantiating module "suffix" from file /etc/freeradius/mods-enabled/realm
# Instantiating module "realmpercent" from file /etc/freeradius/mods-enabled/realm
# Instantiating module "ntdomain" from file /etc/freeradius/mods-enabled/realm
# Instantiating module "mschap" from file /etc/freeradius/mods-enabled/mschap
rlm_mschap (mschap): using internal authentication
# Instantiating module "cache_eap" from file /etc/freeradius/mods-enabled/cache_eap
rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked
# Instantiating module "pap" from file /etc/freeradius/mods-enabled/pap
# Instantiating module "etc_passwd" from file /etc/freeradius/mods-enabled/passwd
rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no
# Instantiating module "files" from file /etc/freeradius/mods-enabled/files
reading pairlist file /etc/freeradius/mods-config/files/authorize
reading pairlist file /etc/freeradius/mods-config/files/accounting
reading pairlist file /etc/freeradius/mods-config/files/pre-proxy
# Instantiating module "logintime" from file /etc/freeradius/mods-enabled/logintime
# Instantiating module "expiration" from file /etc/freeradius/mods-enabled/expiration
# Instantiating module "preprocess" from file /etc/freeradius/mods-enabled/preprocess
reading pairlist file /etc/freeradius/mods-config/preprocess/huntgroups
reading pairlist file /etc/freeradius/mods-config/preprocess/hints
# Instantiating module "attr_filter.post-proxy" from file /etc/freeradius/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/mods-config/attr_filter/post-proxy
# Instantiating module "attr_filter.pre-proxy" from file /etc/freeradius/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/mods-config/attr_filter/pre-proxy
# Instantiating module "attr_filter.access_reject" from file /etc/freeradius/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/mods-config/attr_filter/access_reject
[/etc/freeradius/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay" found in filter list for realm "DEFAULT".
[/etc/freeradius/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay-USec" found in filter list for realm "DEFAULT".
# Instantiating module "attr_filter.access_challenge" from file /etc/freeradius/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/mods-config/attr_filter/access_challenge
# Instantiating module "attr_filter.accounting_response" from file /etc/freeradius/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/mods-config/attr_filter/accounting_response
# Instantiating module "eap" from file /etc/freeradius/mods-enabled/eap
# Linked to sub-module rlm_eap_md5
# Linked to sub-module rlm_eap_leap
# Linked to sub-module rlm_eap_tls
tls {
tls = "tls-common"
}
tls-config tls-common {
verify_depth = 0
ca_path = "/etc/freeradius/certs"
pem_file_type = yes
private_key_file = "/etc/freeradius/certs/server.key"
certificate_file = "/etc/freeradius/certs/server.pem"
ca_file = "/etc/freeradius/certs/ca.pem"
private_key_password = <<< secret >>>
dh_file = "/etc/freeradius/certs/dh"
random_file = "/dev/urandom"
fragment_size = 1024
include_length = yes
auto_chain = yes
check_crl = no
check_all_crl = no
cipher_list = "HIGH"
ecdh_curve = "prime256v1"
cache {
enable = no
lifetime = 24
max_entries = 255
}
verify {
skip_if_ocsp_ok = no
tmpdir = "/tmp/radiusd"
client = "/usr/bin/openssl verify -CApath /etc/freeradius/certs %{TLS-Client-Cert-Filename}"
}
ocsp {
enable = no
override_cert_url = yes
url = "http://127.0.0.1/ocsp/"
use_nonce = yes
timeout = 0
softfail = no
}
}
# Linked to sub-module rlm_eap_ttls
ttls {
tls = "tls-common"
default_eap_type = "md5"
copy_request_to_tunnel = no
use_tunneled_reply = no
virtual_server = "inner-tunnel"
include_length = yes
require_client_cert = no
}
tls: Using cached TLS configuration from previous invocation
# Linked to sub-module rlm_eap_peap
peap {
tls = "tls-common"
default_eap_type = "mschapv2"
copy_request_to_tunnel = no
use_tunneled_reply = no
proxy_tunneled_request_as_eap = yes
virtual_server = "inner-tunnel"
soh = no
require_client_cert = no
}
tls: Using cached TLS configuration from previous invocation
# Instantiating module "reject" from file /etc/freeradius/mods-enabled/always
# Instantiating module "fail" from file /etc/freeradius/mods-enabled/always
# Instantiating module "ok" from file /etc/freeradius/mods-enabled/always
# Instantiating module "handled" from file /etc/freeradius/mods-enabled/always
# Instantiating module "invalid" from file /etc/freeradius/mods-enabled/always
# Instantiating module "userlock" from file /etc/freeradius/mods-enabled/always
# Instantiating module "notfound" from file /etc/freeradius/mods-enabled/always
# Instantiating module "noop" from file /etc/freeradius/mods-enabled/always
# Instantiating module "updated" from file /etc/freeradius/mods-enabled/always
# Instantiating module "auth_log" from file /etc/freeradius/mods-enabled/detail.log
rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output
# Instantiating module "reply_log" from file /etc/freeradius/mods-enabled/detail.log
# Instantiating module "pre_proxy_log" from file /etc/freeradius/mods-enabled/detail.log
# Instantiating module "post_proxy_log" from file /etc/freeradius/mods-enabled/detail.log
} # modules
radiusd: #### Loading Virtual Servers ####
server { # from file /etc/freeradius/sites-enabled/mynetwork
# Loading authenticate {...}
# Loading authorize {...}
# Loading preacct {...}
# Loading accounting {...}
# Loading session {...}
# Loading post-auth {...}
} # server
radiusd: #### Opening IP addresses and Ports ####
listen {
type = "auth"
ipaddr = *
port = 1812
}
Listening on auth address * port 1812
Ready to process requests
答案1
我建议您的 localhost 条目为/etc/freeradius/clients.conf：
client localhost {
ipaddr = 127.0.0.1
secret = secret
require_message_authenticator = no
nas_type = other
}
nas_type通常是cisco,livingston或other。
还检查你的 hostapd.conf：你还应该设置ieee8021x=1
至于require_message_authenticator发送 CoA/断开连接消息更有用，并且要对其进行配置，您需要radius_das_require_message_authenticator=1在hostapd.conf.我[暂时]不需要它。
要运行freeradius -X调试，您还需要停止freeradius守护进程，从 netstat 命令中我们可以看到 1812 正在侦听，因此该服务正在运行；调试它假设您在单线程守护程序中重新启动它。
Freeradius 将启动，直到“正在监听...准备好处理请求”。真正的乐趣从这里开始，之后的一切都是为了调试验证 Wifi 客户端的事务。您可以随时使用 ^C 离开，如果您想恢复服务，可以再次启动该服务。
应该注意的是，passwordclients.conf 中的 /secret 应该与用于调试命令或 hostpad.conf 中的 /secret 相同。否则 freeradius 将拒绝任何具有其他秘密的数据包。
至于我们用来调试 FreeRadius 请求的调试命令，为了其他人的利益：
echo "Message-Authenticator = 0x00,FreeRADIUS-Statistics-Type = 31" | radclient localhost:18121 status adminsecret
此操作会检查状态，但您必须使状态虚拟主机处于活动状态。
和：
echo "User-Name=test,User-Password=mypass,Framed-Protocol=PPP " | /usr/local/bin/radclient localhost:1812 auth secret
至于未来，当你对 Freeradius 更加熟悉之后，如果要在生产中使用此设置，我建议从 github 获取并编译当前的 3.0.13，因为有无数的错误修复。