当我安装 ubuntu 时，我允许 ubuntu 安装程序自动对我的存储进行分区。我现在找不到我的 SSD 驱动器。
这是有关我的分区的信息：
sudo lsblk
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
sda 8:0 0 931.5G 0 disk
├─sda1 8:1 0 487M 0 part /boot
└─sda5 8:5 0 931G 0 part
└─sda5_crypt 252:0 0 931G 0 crypt
├─ubuntu--vg-root 252:1 0 923.2G 0 lvm /
└─ubuntu--vg-swap_1 252:2 0 7.9G 0 lvm
└─cryptswap1 252:3 0 7.9G 0 crypt [SWAP]
sr0 11:0 1 1024M 0 rom
loop0 7:0 0 2M 0 loop /mnt
sudo blkid
/dev/mapper/sda5_crypt: UUID="mVyPmV-H30I-Rycb-0N66-gSAC-otYD-X3TnAu" TYPE="LVM2_member"
/dev/mapper/ubuntu--vg-root: UUID="b81a1102-4d14-4061-882b-64cc86c1ed90" TYPE="ext4"
/dev/sda1: UUID="a9b83004-28a5-4e03-9cf0-5fda39d74ae4" TYPE="ext2" PARTUUID="42700d9b-01"
/dev/sda5: UUID="960539f6-57d1-46b4-9486-db9c4bdfcc5c" TYPE="crypto_LUKS" PARTUUID="42700d9b-05"
/dev/mapper/ubuntu--vg-swap_1: UUID="35bf39cb-d01c-4662-b7ed-43214cb68bf0" TYPE="swap"
/dev/mapper/cryptswap1: UUID="f1d2859e-4c2a-4f04-86a7-f7face7408a5" TYPE="swap"
/dev/loop0: UUID="7FE1-D94A" TYPE="vfat"
sudo lshw -businfo | grep '^scsi'
scsi@0:0.0.0 /dev/sda disk 1TB ST1000LM024 HN-M
scsi@0:0.0.0,1 /dev/sda1 volume 487MiB Linux filesystem partition
scsi@0:0.0.0,2 volume 931GiB Extended partition
scsi@2:0.0.0 /dev/cdrom disk DVD-RAM UJ8D1
我认为列出的是 SSD 设备：
sudo lshw -C storage
*-storage
description: SATA controller
product: 7 Series Chipset Family 6-port SATA Controller [AHCI mode]
vendor: Intel Corporation
physical id: 1f.2
bus info: pci@0000:00:1f.2
version: 04
width: 32 bits
clock: 66MHz
capabilities: storage msi pm ahci_1.0 bus_master cap_list
configuration: driver=ahci latency=0
resources: irq:27 ioport:4088(size=8) ioport:4094(size=4) ioport:4080(size=8) ioport:4090(size=4) ioport:4060(size=32) memory:f3b17000-f3b177ff
*-scsi:0
physical id: 1
logical name: scsi0
capabilities: emulated
*-scsi:1
physical id: 2
logical name: scsi2
capabilities: emulated
如果需要任何进一步的输出，请告诉我！
奖金：关于可能不相关的说明 - 任何可以帮助解决以下问题的人都可以提出以下观点:)
