我无法在 Fedora 14 上通过 Reliance Netconnect+ 连接互联网？它在 Windows 上运行正常。
每当我运行 wvdial 命令时，我都会看到以下错误：
--> WvDial: Internet dialer version 1.61
--> Cannot open /dev/ttyUSB0: No such file or directory
--> Cannot open /dev/ttyUSB0: No such file or directory
--> Cannot open /dev/ttyUSB0: No such file or directory
连接设备时我看到以下日志：
Jun 12 09:53:35 localhost kernel: [ 2180.144145] usb 4-2: new full speed USB device using uhci_hcd and address 2
Jun 12 09:53:35 localhost kernel: [ 2180.294153] usb 4-2: New USB device found, idVendor=12d1, idProduct=1505
Jun 12 09:53:35 localhost kernel: [ 2180.294163] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=4
Jun 12 09:53:35 localhost kernel: [ 2180.294171] usb 4-2: Product: HUAWEI Mobile
Jun 12 09:53:35 localhost kernel: [ 2180.294176] usb 4-2: Manufacturer: HUAÿWEI TECHNOLOGIES
Jun 12 09:53:35 localhost kernel: [ 2180.294182] usb 4-2: SerialNumber: ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ
Jun 12 09:53:35 localhost mtp-probe: checking bus 4, device 2: "/sys/devices/pci0000:00/0000:00:1d.0/usb4/4-2"
Jun 12 09:53:35 localhost mtp-probe: bus: 4, device: 2 was not an MTP device
Jun 12 09:53:35 localhost kernel: [ 2180.670958] Initializing USB Mass Storage driver...
Jun 12 09:53:35 localhost kernel: [ 2180.671294] scsi5 : usb-storage 4-2:1.0
Jun 12 09:53:35 localhost kernel: [ 2180.671415] usbcore: registered new interface driver usb-storage
Jun 12 09:53:35 localhost kernel: [ 2180.671417] USB Mass Storage support registered.
Jun 12 09:53:36 localhost kernel: [ 2181.677229] scsi 5:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 0
Jun 12 09:53:37 localhost kernel: [ 2181.707188] sr1: scsi-1 drive
Jun 12 09:53:37 localhost kernel: [ 2181.709536] sr 5:0:0:0: Attached scsi generic sg2 type 5
运行命令时
usb_modeswitch -H -v 0x12d1 -p 0x1505
Looking for default devices ...
Found devices in default mode or class (1)
Accessing device 002 on bus 004 ...
Using endpoints 0x08 (out) and 0x87 (in)
Using endpoints 0x08 (out) and 0x87 (in)
Inquiring device details; driver will be detached ...
Looking for active driver ...
OK, driver found ("usb-storage")
OK, driver "usb-storage" detached
SCSI inquiry data (for identification)
-------------------------
Vendor String: HUAWEI
Model String: Mass Storage
Revision String: 2.31
-------------------------
USB description data (for identification)
-------------------------
Manufacturer: HUA�WEI TECHNOLOGIES
Product: HUAWEI Mobile
Serial No.: �������������������
-------------------------
Sending Huawei control message ...
OK, Huawei control message sent
-> Run lsusb to note any changes. Bye.
我也运行了下面的命令，但没有运气。
modprobe usbserial vendor=0x12d1 product=0x1505
执行上述命令后运行 wvdial：
--> WvDial: Internet dialer version 1.61
--> Cannot get information for serial port.
--> Initializing modem.
--> Sending: ATZ
--> Sending: ATQ0
--> Re-Sending: ATZ
--> Modem not responding.
我该怎么做才能使 Reliance Netconnect+ 在我的 Linux 机器 - Fedora 14 上运行？
答案1
您好，尝试使用 Sakis3g 脚本。
去谷歌搜索“sakis3g source forge”下载脚本并复制到/usr/bin 解压文件
sudo chmod +x sakis3g
sudo sakis3g
窗口打开后，选择连接 3g -> 接口 #3 -> apn 用户名和密码
点击确定，它应该连接